journal article·2016-01Open access

Monitoring degradation mechanisms in PTB7:PC71BM photovoltaic cells by means of impedance spectroscopy

Belén Arredondo, María B. Martín-López, Beatriz Romero, Ricardo Vergaz, Pablo Romero-Gomez, Jordi Martorell

Abstract

We have used impedance spectroscopy technique to monitor degradation mechanisms in organic solar cells based on a blend of PTB7:PC71BM. We have measured the impedance of the cell on a periodical basis for almost four months, and experimental data have been modeled using three different circuits. The evolution of the circuital parameters gives information about the device dynamical mechanisms. We have observed at high voltages a low frequency feature that is more pronounced along days of measurement. This low frequency arc has been associated to charge accumulation that is related to a worsening of charge extraction through the contacts. The simultaneous increase of recombination and low frequency resistances at high voltages (around V-oc) results in a decrease of the fill factor and therefore of the efficiency.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Polymer Solar Cells10.1038/nphoton.2012.11 ↗
2. Organic-inorganic hybrid solar cells: a comparative review10.1016/j.solmat.2012.07.006 ↗
3. Solar cells with one-day energy payback for the factories of the future10.1039/C1EE02728J ↗
4. Barium: an efficient cathode layer for bulk-heterojunction solar cells Barium:10.1038/srep01965 ↗
5. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
6. Polymer–fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
7. Controlling morphology in polymer–fullerene mixtures10.1002/adma.200701519 ↗
8. Transparent polymer solar cells employing a layered light-trapping architecture10.1038/nphoton.2013.276 ↗
9. Stability of polymer solar cells10.1002/adma.201104187 ↗
10. High efficiency polymer solar cells with long operating lifetimes10.1002/aenm.201100138 ↗
11. Scalability and stability of very thin, roll-to-roll processed, large area, indium-tin-oxide free polymer solar cell modules10.1016/j.orgel.2012.12.033 ↗
12. High-efficiency inverted solar cells based on a low bandgap polymer with excellent air stability10.1016/j.solmat.2011.09.042 ↗
13. A life cycle analysis of polymer solar cell modules prepared using roll-to-roll methods under ambient conditions10.1016/j.solmat.2010.08.020 ↗
14. Development of efficient and stable inverted bulk heterojunction (BHJ) solar cells using different metal oxide interfaces10.3390/ma6125796 ↗
15. Barsoukov · 2005
16. Negative capacitance in organic light-emitting diodes10.1063/1.1865346 ↗
17. Impedance spectrometry of optimized standard and inverted P3HT-PCBM organic solar cells10.1016/j.solmat.2012.01.013 ↗
18. Mechanistic insights into UV-induced electron transfer from PCBM to titanium oxide in inverted-type organic thin film solar cells using AC impedance spectroscopy10.1021/am100312v ↗
19. Elucidating operating modes of bulk-heterojunction solar cells from impedance spectroscopy analysis10.1021/jz302064z ↗
20. Charge carrier mobility and lifetime of organic bulk heterojunctions analyzed by impedance spectroscopy10.1016/j.orgel.2008.06.007 ↗
21. Simultaneous determination of carrier lifetime and electron density-of-states in P3HT:PCBM organic solar cells under illumination by impedance spectroscopy10.1016/j.solmat.2009.10.015 ↗
22. Charge carrier transport and contact selectivity limit the operation of PTB7-based organic solar cells of varying active layer thickness10.1039/c3ta12358h ↗
23. Inverted vs standard PTB7:PC70BM organic photovoltaic devices. The benefit of selective and extracting contacts in device performance10.1016/j.orgel.2014.08.008 ↗
24. Understanding S-shaped current–voltage characteristics in organic solar cells containing a TiOx Interlayer with impedance Spectroscopy and Equivalent Circuit Analysis10.1021/jp305206d ↗
25. Multiple-interface tracking of degradation process in organic photovoltaics10.1063/1.4826586 ↗
26. Organic photovoltaic initial stage degradation analysis using impedance spectroscopy10.1016/j.synthmet.2015.01.029 ↗
27. Influence of moisture out-gassing from encapsulant materials on the lifetime of organic solar cells10.1016/j.solmat.2014.09.030 ↗
28. Nanoscale mapping by electron energy-loss spectroscopy reveals evolution of organic solar cell contact selectivity10.1016/j.orgel.2014.11.007 ↗
29. Solar cells: enhanced light harvesting in semitransparent organic solar cells using an optical metal cavity configuration10.1002/aenm.201400614 ↗
30. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
31. Enhanced stability in semi-transparent PTB7/PC71BM photovoltaic cells10.1016/j.solmat.2015.01.026 ↗
32. Self life degradation of bulk heterojunction solar cells: intrinsic evolution of charge transfer complex10.1002/aenm.201401997 ↗
33. Optimizing the design of flexible PTB7:PC71BM bulk-heterojunction and p3ht:sinw hybrid organic solar cells
34. ZnO-based dye solar cell with pure ionic-liquid electrolyte and organic sensitizer: the relevance of the dye–oxide interaction in an ionic-liquid medium10.1039/C0CP00507J ↗
35. Solid-state dye-sensitized solar cell with a charge transfer layer comprising two ionic liquids and a carbon material10.1039/c1jm11581b ↗
36. Degradation patterns in water and oxygen of an inverted polymer solar cell10.1021/ja106299g ↗
37. Oxygen-and water-induced degradation of an inverted polymer solar cell: the barrier effect10.1117/1.3544010 ↗
38. Impedance model of trap states for characterization of organic semiconductor devices10.1063/1.3693545 ↗
39. Degradation and stability of polymer and organic solar cells10.1016/j.solmat.2008.01.016 ↗