Nanophotonic perovskite layers for enhanced current generation and mitigation of lead in perovskite solar cells
Source abstract
Abstract
Abstract Intensive research on lead halide perovskites over the last decade led to highly efficient perovskite thin-film photovoltaics. Further enhancement in power conversion efficiency (PCE) of this technology is expected from improved light management. In this simulation-based study, nanophotonic perovskite absorber layers are designed in order to enhance the short-circuit current density (JSC) of perovskite solar cells. The enhancement in JSC is beneficial in one of two ways. Firstly, optimized nanophotonic perovskite layers lead to an enhancement in JSC by 5–6% assuming a constant perovskite absorber volume, which correlates to a similar improvement in PCE and annual energy yield (EY). Secondly, optimized nanophotonic perovskite layers can alternatively allow a high JSC to be maintained at reduced perovskite absorber volumes. The latter approach results in about one third of the harmful lead content being mitigated in conventional perovskite solar cells, for an initial perovskite layer thickness of ~300 nm. This study evaluates and analyzes in detail the design of nanophotonic perovskite layers that can be fabricated by nanoimprint lithography. Various design parameters of the nanophotonic perovskite layers such as the period (150–750 nm), the geometrical filling fraction (0.2–0.6) and the depth (0–500 nm) of the nanostructures are studied. A broad optimum to enhance JSC is found for a period of 400 nm. Finally, the angular stability of simulated nanophotonic perovskite solar cells is shown and their excellent light harvesting for realistic irradiation conditions is demonstrated by EY modelling.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Electronics and Photovoltaics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. The emergence of perovskite solar cells10.1038/nphoton.2014.134 ↗
2. National Renewable Energy Laboratory (NREL), Efficiency Chart. 〈https://www.nrel.gov/pv/assets/pdfs/pv-efficiencies-07-17-2018.pdf〉 (Accessed 1 December 2018), 2018.
3. Photon recycling in lead iodide perovskite solar cells10.1126/science.aaf1168 ↗
4. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
5. Perovskites: the emergence of a new era for low-cost, high-efficiency solar cells10.1021/jz4020162 ↗
6. Perovskite solar cells: from the atomic level to film quality and device performance10.1002/anie.201703226 ↗
7. Perovskite photonic sources10.1038/nphoton.2016.62 ↗
8. Efficiency limit of Perovskite/Si tandem solar cells10.1021/acsenergylett.6b00405 ↗
9. Light management in perovskite solar cells and organic LEDs with microlens arrays10.1364/OE.25.010704 ↗
10. CH 3 NH 3 PbI 3 planar perovskite solar cells with antireflection and self-cleaning function layers10.1039/C6TA01800A ↗
11. Numerical design of thin perovskite solar cell with fiber array-based anti-reflection front electrode for light-trapping enhancement10.1088/2040-8978/18/12/125901 ↗
12. Nanophotonic front electrodes for perovskite solar cells (SI)10.1063/1.4918751 ↗
13. Enhanced light harvesting in perovskite solar cells by a bioinspired nanostructured back electrode10.1002/aenm.201700492 ↗
14. Moth-eye TiO2 layer for improving light harvesting efficiency in perovskite solar cells10.1002/smll.201600428 ↗
15. Efficient light harvesting with micropatterned 3d pyramidal photoanodes in dye-sensitized solar cells10.1002/adma.201300085 ↗
16. Facile fabrication of three-dimensional TiO2 structures for highly efficient perovskite solar cells10.1016/j.nanoen.2016.02.050 ↗
17. Mesoscopic CH3NH3PbI3 perovskite solar cells using TiO2 inverse opal electron-conducting scaffolds10.1039/C6TA07004C ↗
18. Designing nanobowl arrays of mesoporous TiO2 as an alternative electron transporting layer for carbon cathode-based perovskite solar cells10.1039/C5NR06715D ↗
19. Perovskite solar cells on corrugated substrates with enhanced efficiency10.1002/smll.201601974 ↗
20. Perovskite/perovskite/silicon monolithic triple-junction solar cells with a fully textured design10.1021/acsenergylett.8b01165 ↗
21. Nanophotonic light management for perovskite–silicon tandem solar cells10.1117/1.JPE.8.022601 ↗
22. S. Makarov, A. Furasova, E. Tiguntseva, A. Hemmetter, A. Berestennikov, A. Pushkarev, A. Zakhidov, Y. Kivshar, Halide-Perovskite Resonant Nanophotonics, (n.d.). 〈https://arxiv.org/pdf/1806.08917.pdf〉 (Accessed 10 July 2018).10.1002/adom.201800784 ↗
23. Photonic nanostructures patterned by thermal nanoimprint directly into organo-metal halide perovskites10.1002/adma.201605003 ↗
24. Nanophotonic organic solar cell architecture for advanced light trapping with dual photonic crystals10.1021/ph500124q ↗
25. Photonic crystals for improving light absorption in organic solar cells10.1063/1.4906848 ↗
26. Diffraction-grated perovskite induced highly efficient solar cells through nanophotonic light trapping10.1002/aenm.201702960 ↗
27. Thermal nanoimprint to improve the morphology of MAPbX3 (MA = methylammonium, X = I or Br)
28. Oriented grains with preferred low-angle grain boundaries in halide perovskite films by pressure-induced crystallization
29. Controlling crystallization to imprint nanophotonic structures into halide perovskites using soft lithography10.1039/C7TC02775C ↗
30. Nanoimprinted distributed feedback lasers of solution processed hybrid perovskites10.1364/OE.24.023677 ↗
31. Distributed feedback lasers based on MAPbBr310.1002/admt.201700253 ↗
32. Structured organic-inorganic perovskite toward a distributed feedback laser10.1002/adma.201502608 ↗
33. Preparation of waterproof Organometal halide perovskite photonic crystal beads10.1002/anie.201702556 ↗
34. Halide perovskite 3D photonic crystals for distributed feedback lasers10.1021/acsphotonics.7b00780 ↗
35. Simulation study on improving efficiencies of perovskite solar cell: introducing nano textures on it10.1016/j.optcom.2017.09.037 ↗
36. Efficient light management by textured nanoimprinted layers for perovskite solar cells10.1021/acsphotonics.7b00138 ↗
37. Diffraction-grated perovskite induced highly efficient solar cells through nanophotonic light trapping10.1002/aenm.201702960 ↗
38. Low-toxic metal halide perovskites: opportunities and future challenges10.1039/C7TA00269F ↗
39. Lead-free halide double perovskites via heterovalent substitution of noble metals10.1021/acs.jpclett.6b00376 ↗
40. Lead-free perovskite solar cells10.1021/acsenergylett.7b00246 ↗
41. Perovskite solar cells go lead free10.1016/j.joule.2017.09.007 ↗
42. Low-bandgap mixed tin-lead iodide perovskite absorbers with long carrier lifetimes for all-perovskite tandem solar cells10.1038/nenergy.2017.18 ↗
43. Perovskite solar cells: must lead be replaced – and can it be done?10.1080/14686996.2018.1460176 ↗
44. Rain on methylammonium lead iodide based perovskites: possible environmental effects of perovskite solar cells10.1021/acs.jpclett.5b00504 ↗
45. Toxicity of organometal halide perovskite solar cells10.1038/nmat4572 ↗
46. Plasmonics and nanophotonics for photovoltaics10.1557/mrs.2011.132 ↗
47. Optical analysis of planar multicrystalline perovskite solar cells10.1002/adom.201700151 ↗
48. The National Renewable Energy Laboratory (NREL), Reference Solar Spectral Irradiance: Air Mass 1.5, Am. Soc. Test. Mater. - Terr. Ref. Spectra Photovolt. Perform. Eval 21. 〈http://rredc.nrel.gov/solar/spectra/am1.5/#about〉 (Accessed 28 July 2018).
49. Energy yield modelling of perovskite/silicon two-terminal tandem PV modules with flat and textured interfaces10.1039/C8SE00465J ↗
50. Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance10.1126/science.aah5557 ↗
51. Efficient and air-stable mixed-cation lead mixed-halide perovskite solar cells with n-Doped organic electron extraction layers10.1002/adma.201604186 ↗
52. Controllable self-induced passivation of hybrid lead iodide perovskites toward high performance solar cells10.1021/nl501838y ↗
53. Statistical ray optics10.1364/JOSA.72.000899 ↗
54. First principles modelling of perovskite solar cells based on TiO2 and Al2O3: stability and interfacial electronic structure10.1039/C6TA08874K ↗
55. Lambertian light trapping in textured solar cells and light-emitting diodes: analytical solutions10.1002/pip.404 ↗
56. Recent advances in perovskite solar cells: efficiency, stability and lead-free perovskite10.1039/C7TA00366H ↗
57. Toward lead-free perovskite solar cells10.1021/acsenergylett.6b00499 ↗