Improvement in separation rate of epitaxial lift-off by hydrophilic solvent for GaAs solar cell applications
Source abstract
Abstract
Abstract In this study, the epilayer structure of a GaAs solar cell was quickly separated from the GaAs substrate by performing the epitaxial lift-off (ELO) process in hydrofluoric acid (HF) solutions mixed with hydrophilic substances, and the epilayer structure was then transferred to a Cu substrate. The lateral etching rate (7.4–14.3 μm/min) of the AlAs sacrificial layer, obtained by adding hydrophilic substances – namely acetone (ACE), isopropanol (IPA), and methanol (MA) – to the HF solution was much higher than that obtained using a pure HF solution (3.6 μm/min). We attributed the increase in the lateral etching rate to the decrease in both the surface tension of these solutions and the contact angle between the etching-induced bubble and substrate, which enabled efficient venting of bubbles during the ELO process. By contrast, when the HF:ACE solution was used in the ELO process, few solid products were deposited on the sample surface, indicating that there was little obstruction for bubble venting. Therefore, although HF:ACE exhibited the highest surface tension and contact angle among these three solutions, it still resulted in the highest lateral etching rate (14.3 μm/min). When the hydrophilic substances were added to HF solution, the cell efficiency was not degraded after the ELO process. Furthermore, the cell device requiring the shortest removal time of the GaAs substrate exhibited the highest efficiency, because of the low etching-induced damage to the GaAs epilayer. Additionally, the GaAs substrate can be rapidly removed and reused via this ELO technique, which is beneficial for photovoltaic applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: solar cell performance optimization · Nanowire Synthesis and Applications · Semiconductor Quantum Structures and Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Extreme selectivity in the lift-off of epitaxial GaAs films10.1063/1.98946 ↗
2. Influence of radius of curvature on the lateral etch rate of the weight induced epitaxial lift-off process10.1016/S0921-5107(02)00240-4 ↗
3. Thin-film GaAs epitaxial lift-off solar cells for space applications10.1002/pip.616 ↗
4. GaInP single junction and GaInP/GaAs two junction thin-film solar cell structures by epitaxial lift-off10.1016/S0927-0248(97)00152-9 ↗
5. Process damage free thin-film GaAs solar cells by epitaxial liftoff with GaInP window layer10.1016/S0927-0248(97)00140-2 ↗
6. High-efficiency GaInP/GaAs/InGaAs triple-junction solar cells grown inverted with a metamorphic bottom junction10.1063/1.2753729 ↗
7. T. Takamoto, T. Kodama, H. Yamaguchi, T. Agui, N. Takahachi, H. Washio, T. Hisamatsu, M. Kaneiwa, K. Okamoto, Paper-thin InGaP/GaAs solar cells, in: Proceedings of the IEEE Fourth World Conference on Photovoltaic Energy Conversion, Waikoloa 2, 2006, pp. 1769–1772.10.1109/WCPEC.2006.279833 ↗
8. InGaP/GaAs-based multijunction solar cells10.1002/pip.642 ↗
9. Fabrication and characterization of GaAs solar cells on copper substrates10.1109/LED.2009.2026292 ↗
10. Wafer reuse for repeated growth of III–V solar cells10.1002/pip.930 ↗
11. GaAs photovoltaics and optoelectronics using releasable multilayer epitaxial assemblies10.1038/nature09054 ↗
12. Etching AlAs with HF for epitaxial lift-off applications10.1149/1.1690293 ↗
13. High-rate GaAs epitaxial lift-off technique for optoelectronic integrated circuits10.1143/JJAP.36.1554 ↗
14. AFM study of surface finish improvement by ultrasound in the anisotropic etching of Si 〈100〉 in KOH for micromachining applications10.1088/0960-1317/7/4/010 ↗
15. On the calculation of surface tension from measurements of pendant drops10.1098/rspa.1948.0063 ↗
16. Dean · 1999 · 462
17. Arsenic formation on GaAs during etching in HF solutions: relevance for the epitaxial lift-off process10.1149/2.006303jss ↗
18. Analysis of stoichiometry and oxide growth of HF treated GaAs (100) by x-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry10.1116/1.587172 ↗
19. The etching of InP in HCI solutions: a chemical mechanism
20. High rate epitaxial lift-off of InGaP films from GaAs substrates10.1063/1.126276 ↗
21. Performance of GaAs/mirror/Cu-substrate thin-film solar cells10.1109/TED.2011.2165721 ↗
22. Manufacturing tolerances of terrestrial concentrator p-on-n GaAs solar cells10.1002/pip.352 ↗
23. Analytical methods for the extraction of solar-cell single- and double-diode model parameters from IV characteristics10.1109/T-ED.1987.22920 ↗
24. Effect of crystalline quality on photovoltaic performance for In0.17Ga0.83As solar cell using X-ray reciprocal space mapping10.1109/JQE.2011.2166535 ↗
25. Improved performance mechanism of III–V compound triple junction solar cell using hybrid electrode structure10.1016/j.solener.2012.12.012 ↗
26. L. Zhao, High Efficiency Mechanically Stacked Multi-junction Solar Cells for Concentrator Photovoltaics, University of Ku Leuven, 2011.
27. Effects of thermal cycle annealing on reduction of defect density in lattice-mismatched InGaAs solar cells10.1016/j.physb.2005.12.158 ↗