The investigation of inverted p-i-n planar perovskite solar cells based on FASnI3 films
Source abstract
Abstract
Abstract Formamidinium tin iodide (FASnI3), as one promising Pb-free halide perovskite, has received extensive attention. But perovskite solar cells (PSCs) based on FASnI3 films have yet to realize the high power conversion efficiency (PCE) achieved in its Pb-based counterparts. To investigate the limitation of FASnI3-based perovskite solar cells with inverted p-i-n planar structures, the influences of various parameters on the device performance are analyzed through device simulation. The results reveal that defect density at front hole transport material (HTM)/absorber interface is critical for high efficiency. And it is interesting to note that the doping density, rather than the doping type and its space distribution, dominates the device properties, and an upper limit of 1 × 1016 cm−3 is achieved. In addition, the response of device to band offset is investigated, and an optimum electron affinity of 3.9 eV is obtained. Finally, the effects of relative permittivity and thickness of the absorber with different carrier lifetime are studied. A maximum PCE of 9.75% is achieved at absorber thickness of 300 nm with carrier lifetime of 0.1 ns? These results show that optimizing the interface property and band offset, improving the stability of Sn2+ and reducing the defect density of absorber layer are the main challenges for high-performance FASnI3-based PSCs in the future research.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Solid-state spectroscopy and crystallography
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
2. High-efficiency perovskite solar cells based on MAI(PbI2)1−x(FeCl2)x absorber layers10.1016/j.solener.2017.11.063 ↗
3. Long-range balanced electron- and hole-transport lengths in organic-inorganic CH3NH3PbI310.1126/science.1243167 ↗
4. Electron-hole diffusion lengths exceeding 1 μm in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
5. Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells10.1039/c3ee43822h ↗
6. High-efficiency and air-stable perovskite quantum dots light-emitting diodes with an all-inorganic heterostructure10.1021/acs.nanolett.6b04116 ↗
7. Chemical management for colorful, efficient, and stable inorganic-organic hybrid nanostructured solar cells10.1021/nl400349b ↗
8. Electron-hole diffusion lengths >175 μm in solution-grown CH3NH3PbI3 single crystals10.1126/science.aaa5760 ↗
9. Strategy of solution-processed all-inorganic heterostructure for humidity/temperature-stable perovskite quantum dot light-emitting diodes10.1021/acsnano.7b07856 ↗
10. Direct measurement of the exciton binding energy and effective masses for charge carriers in organic‒inorganic tri-halide perovskites10.1038/nphys3357 ↗
11. The modified multi-step thermal annealing process for highly efficient MAPbI3-based perovskite solar cells10.1016/j.solener.2018.09.016 ↗
12. National Renewable Energy Laboratory. Best Research-Cell Efficiencies. Available online: https://www.nrel.gov/pv/assets/pdfs/best-reserch-cell-efficiencies.20190411.pdf.
13. A critical review on tin halide perovskite solar cells10.1039/C7TA00929A ↗
14. Progress on lead-free metal halide perovskites for photovoltaic applications: a review10.1007/s00706-017-1933-9 ↗
15. Lead-free organic–inorganic hybrid perovskites for photovoltaic applications: recent advances and perspectives10.1002/adma.201605005 ↗
16. Effects of organic cations on the defect physics of tin halide perovskites10.1039/C7TA02662E ↗
17. Hao · Nat. Photon. · 2014 · 8 · 48910.1038/nphoton.2014.82 ↗
18. Radiative monomolecular recombination boosts amplified spontaneous emission in HC(NH2)2SnI3 perovskite films10.1021/acs.jpclett.6b02030 ↗
19. formation of hybrid perovskite tin iodide single crystals by top-seeded solution growth10.1002/anie.201511792 ↗
20. Semiconducting tin and lead iodide perovskites with organic cations: phase transitions, high mobilities, and near-infrared photoluminescent properties10.1021/ic401215x ↗
21. Synthesis, resistivity, and thermal properties of the cubic perovskite NH2CH=NH2SnI3 and related systems10.1006/jssc.1997.7593 ↗
22. Formamidinium tin-based perovskite with low Eg for photovoltaic applications10.1039/C5TA00190K ↗
23. Fabrication of efficient formamidinium tin iodide perovskite solar cells through SnF2−Pyrazine complex10.1021/jacs.6b00142 ↗
24. Mixed-organic-cation tin iodide for lead-free perovskite solar cells with an efficiency of 8.12%10.1002/advs.201700204 ↗
25. Highly reproducible Sn-based hybrid perovskite solar cells with 9% efficiency10.1002/aenm.201702019 ↗
26. Robust tin-based perovskite solar cells with hybrid organic cations to attain efficiency approaching 10%10.1002/adma.201804835 ↗
27. The simulation of physical mechanism for HTM-free perovskite organic lead iodide planar heterojunction solar cells10.1088/2040-8978/17/10/105904 ↗
28. Two-dimensional modeling of TiO2 nanowire based organic–inorganic hybrid perovskite solar cells10.1016/j.solmat.2016.03.017 ↗
29. Two-dimensional device modeling of CH3NH3PbI3 based planar heterojunction perovskite solar cells10.1016/j.solener.2015.11.009 ↗
30. Investigation of organic–inorganic hybrid perovskite solar cells based on Al2O3 nanorods10.1016/j.solener.2017.05.062 ↗
31. Device modeling of perovskite solar cells based on structural similarity with thin film inorganic semiconductor solar cells10.1063/1.4891982 ↗
32. Mitigation of interface recombination by careful selection of ETL for efficiency enhancement of MASnI3 solar cell10.1016/j.ijleo.2018.05.135 ↗
33. Efficiency enhancement of CH3NH3SnI3 solar cells by device modeling10.1007/s11664-018-6406-3 ↗
34. Lead-free inverted planar formamidinium tin triiodide perovskite solar cells achieving power conversion efficiencies up to 6.22%10.1002/adma.201602992 ↗
35. Realizing efficient lead-free formamidinium tin triiodide perovskite solar cells via a sequential deposition route10.1002/adma.201703800 ↗
36. Highly oriented low-dimensional tin halide perovskites with enhanced stability and photovoltaic performance10.1021/jacs.7b01815 ↗
37. Low-dimensional perovskite interlayer for highly efficient lead-free formamidinium tin iodide perovskite solar cells10.1016/j.nanoen.2018.05.006 ↗
38. TiO2−ZnS cascade electron transport layer for efficient formamidinium tin iodide perovskite solar cells10.1021/jacs.6b08790 ↗
39. Multichannel interdiffusion driven FASnI3 film formation using aqueous hybrid salt/polymer solutions toward flexible lead-free perovskite solar cells10.1002/adma.201606964 ↗
40. Solvent-coordinated tin halide complexes as purified precursors for tin-based perovskites10.1021/acsomega.7b01292 ↗
41. Fabrication of efficient low-bandgap perovskite solar cells by combining formamidinium tin iodide with methylammonium lead iodide10.1021/jacs.6b08337 ↗
42. Reducing carrier density in formamidinium tin perovskites and its beneficial effects on stability and efficiency of perovskite solar cells10.1021/acsenergylett.7b00976 ↗
43. Bilateral interface engineering toward efficient 2D−3D bulk heterojunction tin halide lead-free perovskite solar cells10.1021/acsenergylett.8b00085 ↗
44. Enhanced photovoltaic performance and stability with a new type of hollow 3D perovskite {en}FASnI310.1126/sciadv.1701293 ↗
45. Dopant-free tetrakis-triphenylamine hole transporting material for efficient tin-based perovskite solar cells10.1021/jacs.7b10898 ↗
46. Mixed Sn-Ge perovskite for enhanced perovskite solar cell performance in air10.1021/acs.jpclett.8b00275 ↗
47. Diammonium cations in the FASnI3 perovskite structure lead to lower dark currents and more efficient solar cells10.1021/acsenergylett.8b00687 ↗
48. Lead-free Dion−Jacobson tin halide perovskites for photovoltaics10.1021/acsenergylett.8b02051 ↗
49. Charge accumulation induced S-shape J–V curves in bilayer heterojunction organic solar cells Org
50. Efficient vacuum-deposited organic solar cells based on a new low-bandgap oligothiophene and fullerene C6010.1002/adma.200600658 ↗
51. Improving the reproducibility of P3HT:PCBM solar cells by controlling the PCBM/cathode interface10.1021/jp9082163 ↗
52. Dipole induced anomalous S-shape I-V curves in polymer solar cells
53. Mechanism of tin oxidation and stabilization by lead substitution in tin halide perovskites10.1021/acsenergylett.7b00636 ↗
54. Theoretical analysis on effect of band offsets in perovskite solar cells10.1016/j.solmat.2014.10.036 ↗
55. Device simulation of lead-free CH3NH3SnI3 perovskite solar cells with high efficiency10.1088/1674-1056/25/10/108802 ↗
56. Improving the performance of inverted formamidinium tin iodide perovskite solar cells by reducing the energy-level mismatch10.1021/acsenergylett.8b00383 ↗