Stable CdTe solar cell with V2O5 as a back contact buffer layer
Source abstract
Abstract
Abstract A low electric resistive and stable back contact on p-type CdTe semiconductor is crucial for the commercial employment of high efficiency CdTe thin film solar cell. In this study, V 2 O 5 was deposited as a buffer layer between CdTe and metal electrode in the back contact of CdTe solar cells. Different back contact structures were fabricated on CdTe to study the effect of a V 2 O 5 buffer layer on cell device performance. Both the quantitative band alignment and the device performance of the CdTe solar cells with a V 2 O 5 buffer layer demonstrated that a much lower Schottky barrier was formed compared to the cells with an Au-only back contact. The defect states related to oxygen vacancy within the band gap of the V 2 O 5 played a crucial role in reducing the energy barrier for hole carrier transport. Employing a back contact structure of Cu/V 2 O 5 /Cu/Au, a CdTe solar cell with an efficiency as high as 14.0% was fabricated. Long term device stressing test demonstrated that, compared to the CdTe cells with a Cu/Au back electrode, solar cells with the insertion of a V 2 O 5 buffer layer showed much enhanced device stability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Semiconductor materials and interfaces · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Optical properties of polycrystalline CdTe films10.1063/1.329272 ↗
2. Solar cell efficiency tables (Version 46)10.1002/pip.2637 ↗
3. Schottky barriers: an effective work function model10.1063/1.92863 ↗
4. Phase control of CuxTe film and its effects on CdS/CdTe solar cell10.1016/j.tsf.2006.12.151 ↗
5. High-efficiency polycrystalline CdTe thin-film solar cells10.1016/j.solener.2004.06.006 ↗
6. Room-temperature detection of mobile impurities in compound semiconductors by transient ion drift10.1063/1.365563 ↗
7. Stability of CdTe/CdS thin-film solar cells10.1016/S0927-0248(00)00014-3 ↗
8. Carrier density and compensation in semiconductors with multiple dopants and multiple transition energy levels: case of Cu impurities in CdTe10.1103/PhysRevB.83.245207 ↗
9. Thin-film metal oxides in organic semiconductor devices: their electronic structures, work functions and interfaces10.1038/am.2013.29 ↗
10. Transition metal oxides as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗
11. CdS/CdTe solar cells with MoOx as back contact buffers10.1063/1.3489414 ↗
12. MoOx back contact for CdS/CdTe thin film solar cells: preparation, device characteristics, and stability10.1016/j.solmat.2012.01.001 ↗
13. Electrochromic vanadium-pentoxide-based films: structural, electrochemical, and optical properties10.1063/1.359433 ↗
14. Transition metal vanadium oxides and vanadate materials for lithium batteries10.1039/c0jm04239k ↗
15. An XPS study on the surface reduction of V2O5 (001) induced by Ar+ ion bombardment10.1016/j.susc.2006.07.006 ↗
16. Photoelectron spectroscopy study of oxygen vacancy on vanadium oxides surface10.1016/j.apsusc.2004.05.112 ↗
17. Barrierless hole injection through sub-bandgap occupied states in organic light emitting diodes using substoichiometric MoOx anode interfacial layer10.1063/1.3673283 ↗
18. Thin film CdTe solar cells with an absorber layer thickness in micro- and sub-micrometer scale10.1063/1.3644160 ↗
19. High-efficiency CdTe thin-film solar cell with a mono-grained CdS window layer10.1039/C4RA01394H ↗
20. Influence of film thickness on texture and electrical and optical properties of room temperature deposited nanocrystalline V2O5 thin films10.1063/1.2844438 ↗
21. Structural and optical studies of nanocrystalline V2O5 thin films10.1016/j.tsf.2007.04.165 ↗
22. XRD and Raman study of vanadium oxide thin films deposited on fused silica substrates by RF magnetron sputtering10.1016/S0169-4332(00)00918-1 ↗
23. High-resolution work function imaging of single grains of semiconductor surfaces10.1063/1.1471375 ↗
24. Structural and electrical properties of sputtered vanadium oxide thin films for applications as gas sensing material10.1063/1.363973 ↗
25. Study of structural, electrical and optical properties of vanadium oxide condensed films deposited by spray pyrolysis technique10.1007/s40436-013-0045-y ↗
26. Application of ultraviolet photoelectron spectroscopy in the surface characterization of polycrystalline oxide catalysts. 2. Depth variation of the reduction degree in the surface region of partially reduced V2O510.1021/jp994188o ↗
27. Influence of magnetron deposition parameters on the stoichiometry of sputtered V2O5 films10.1002/sia.1866 ↗
28. Determination of the V2p XPS binding energies for different vanadium oxidation states (V5+ to V0+)10.1016/j.elspec.2004.03.004 ↗
29. X-ray photoemission spectroscopy studies of Sn-doped indium-oxide films10.1063/1.324149 ↗
30. Assistance of partially reduced MoO3 interlayer to hole-injection at iron phthalocyanine/ITO interface evidenced by photoemission study10.1016/j.apsusc.2013.01.200 ↗
31. Universal energy-level alignment of molecules on metal oxides10.1038/nmat3159 ↗
32. Electronic structure of Vanadium pentoxide: an efficient hole injector for organic electronic materials10.1063/1.3611392 ↗
33. Band alignment of ultra-thin hetero-structure ZnO/TiO2 junction10.1016/j.materresbull.2013.12.013 ↗
34. Valence band offset of InN/AlN heterojunctions measured by X-ray photoelectron spectroscopy10.1063/1.2716994 ↗
35. Effect of back-contact barrier on thin-film CdTe solar cells10.1016/j.tsf.2006.01.004 ↗
36. Strategies to increase CdTe solar-cell voltage10.1016/j.tsf.2006.12.147 ↗
37. The use of Au–Cd alloys to achieve large Schottky barrier heights on CdTe10.1063/1.329293 ↗
38. G. Koishiyev, J. Sites, S. Kulkarni, N. Dhere, Determination of back contact barrier height in Cu(In,Ga)(Se,S)2 and CdTe solar cells, in: Proceedings of the IEEE 33rd Photovoltaic Specialists Conference, San Diego, 2008, pp. 1–3.10.1109/PVSC.2008.4922886 ↗
39. S. Demtsu, J. Sites, D. Albin, Role of copper in the performance of CdS/CdTe solar cells, in: Proceedings of the IEEE 4th World Conference on Photovolatic Energy Conversion, Hawaii, 2006, NREL/CP-520-39923.10.1109/WCPEC.2006.279507 ↗
40. A. Kaminski, J. Marchand, H. Omari, A. Laugier, Conduction processes in silicon solar cells, in: Proceedings of Photovoltaic Specialists Conference, Washington, 1996, pp. 573–576.10.1109/PVSC.1996.564071 ↗