journal article·2014-01

Hybrid sol–gel layers containing CeO2 nanoparticles as UV-protection of plastic lenses for concentrated photovoltaics

Mohamed Aklalouch, Albert Calleja, Xavier Granados, Susagna Ricart, Vicenzo Boffa, Fabrizio Ricci, Teresa Puig, Xavier Obradors

Publisher page

Abstract

Abstract Fresnel lenses made of polymethylmethacrylate (PMMA) represent a cost-effective approach for concentrated photovoltaic (CPV) panels. The lens must sustain suitable working performance during the whole lifetime of the photovoltaic plant, as UV photodegradation is the main issue to be avoided. In this work, PMMA sheets were covered with a hybrid organic–inorganic sol–gel coating consisting of a matrix of an organically modified silicate (ORMOSIL) in which CeO2 nanoparticles 10–20 nm in size were dispersed, acting as the UV-absorbing agent. Ceria contents up to 40% w/w were studied and blended with the precursor ORMOSIL solution before deposition and in-situ polymerization at 80 °C. The UV–visible spectra were analyzed between 200 and 800 nm. Furthermore, the effect of the aging on outdoor weathering was investigated for the coated PMMA sheets and compared to the unprotected sample. The results show that a load of 30% w/w of ceria nanoparticles provides a reasonable compromise in terms of UV protection and absorption in the visible range. The weathering test also demonstrates enhanced protection against UV degradation for the coated PMMA sheet compared to the bare substrate, although the adherence should be further improved for optimum performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · solar cell performance optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. J.L. Sawin, Renewables 2011 Global Status Report, in: REN21 (Ed.), Paris, 2011.
2. A review on solar energy use in industries10.1016/j.rser.2010.12.018 ↗
3. Innovation in concentrated solar power10.1016/j.solmat.2011.05.020 ↗
4. Solar cell generations over 40% efficiency10.1002/pip.1255 ↗
5. Fraas · 2010 · 477
6. Durability of Fresnel lenses: a review specific to the concentrating photovoltaic application10.1016/j.solmat.2011.01.031 ↗
7. Fraas · 2010 · 207
8. D. Appleyard, Solar Trackers: Facing the Sun, 2009, 〈www.RenewableEnergyWorld.com〉.
9. M. Lapsa, K. Genung, C. Maxey, G. Melear-Hough, Technical Report from the 1st Southeast Solar Summit, Oak Ridge National Laboratory, Oak Ridge, 2007, pp. 7–8, 〈http://www.ornl.gov/sci/solarsummit〉.
10. Fraas · 2010 · 601
11. Preventing UV-light damage of light sensitive materials using a highly protective UV-absorbing coating10.1039/b608888k ↗
12. Degradation of poly(methyl methacrylate) model compounds under extreme environmental conditions10.1002/macp.200900625 ↗
13. Degradation studies of polyolefins incorporating transparent nanoparticulate zinc oxide UV stabilizers10.1023/A:1020121700825 ↗
14. Effect of outdoor aging on acrylic sheet10.1016/0038-092X(75)90008-0 ↗
15. B. Azzopardi, J. Mutale, D. Kirschen, Cost boundaries for future PV solar cell modules, in: IEEE International Conference on Sustainable Energy Technologies, 2008 ICSET, 2008, pp. 589–594.10.1109/ICSET.2008.4747076 ↗
16. Kinetic study of the photostabilisation of polypropylene films by an hydroxyphenylbenzotriazole10.1016/S0141-3910(98)00182-7 ↗
17. Review of sunscreen and the emergence of non-conventional absorbers and their applications in ultraviolet protection10.1111/j.1468-2494.2011.00654.x ↗
18. Possibilities and limits of synergism with light stabilizers in polyolefins 2. UV absorbers in polyolefins10.1016/S0141-3910(01)00232-4 ↗
19. Advanced nanoarchitectures for solar photocatalytic applications10.1021/cr100454n ↗
20. Nonlinear optical materials by the sol–gel method10.1007/BF00486425 ↗
21. Highly efficient UV-absorbing thin-film coatings for protection of organic materials against photodegradation10.1039/b601577h ↗
22. Structures and properties of Ormosils10.1007/BF00486217 ↗
23. A spectroscopic ellipsometry study of cerium dioxide thin films grown on sapphire by RF magnetron sputtering10.1063/1.359225 ↗
24. V. Petrovsky, B. Gorman, H.U. Anderson, T. Petrovsky, Nanoporous Ceria Films Prepared from Colloidal Suspension, AA7.6.1–AA7.6.6, 2001.
25. Synthesis of nanocrystalline ceria colloids in nonpolar solvents10.1134/S0012500810010064 ↗
26. ZnO:CeO2-based nanopowders with low catalytic activity as UV absorbers10.1016/j.apsusc.2009.06.071 ↗
27. Application of nanostructured Ca doped CeO2 for ultraviolet filtration10.1016/j.materresbull.2010.02.008 ↗
28. Strategies of making TiO2 and ZnO visible light active10.1016/j.jhazmat.2009.05.064 ↗
29. Photocatalytic mechanisms of modified titania under visible light10.1007/s11164-010-0232-4 ↗
30. Preparation of organic–inorganic multifunctional nanocomposite coating via sol–gel routes10.1023/A:1017944905230 ↗
31. Coarsening of Ag nanoparticles in SiO2-PEO hybrid film matrix by UV light10.1039/B603213C ↗
32. M. Mager, Compositions Comprising Inorganic UV Absorbers, United States Patent and Trademark Office, Bayer Aktiengesellschaft, Leverkusen, Germany, USA, 2004.
33. A study towards improving mechanical properties of sol–gel coatings for polycarbonate10.1016/j.tsf.2007.06.149 ↗
34. ASTM Standard WK22010, New Guide for Testing Performances, Weathering and Aging of Photovoltaic Modules, ASTM International, West Conshohocken, PA, 2008.
35. ASTM Standard WK25362, New Practice for Accelerated Life Testing of Photovoltaic Modules, ASTM International, West Conshohocken, PA, 2009.
36. McConnell · 2004
37. U.S. Department of Energy, 2011, 〈http://www.solarabcs.org/codes-standards/index.html〉.
38. Viscosity and structure of Ormosil solutions10.1007/BF00487724 ↗
39. Spectroscopic and corrosion resistance characterization of GLYMO–TEOS Ormosil coatings for aluminum alloy corrosion inhibition10.1016/S0300-9440(02)00063-2 ↗
40. Adhesion enhancement of sol–gel coating on polycarbonate by heated impregnation treatment10.1016/j.tsf.2009.03.086 ↗
41. Line energy and the relation between advancing, receding, and young contact angles10.1021/la049410h ↗
42. Effect of plasma pretreatment on adhesion and mechanical properties of UV-curable coatings on plastics10.1016/j.apsusc.2010.12.060 ↗
43. The influence of side groups and polarity of polymers on the kind and effectiveness of their surface modification by air plasma action10.1016/S0014-3057(02)00059-9 ↗
44. Transparent thermoplastic polymers in plasma-assisted coating processes10.1016/S0257-8972(03)00414-6 ↗
45. Role of promoters in improving adhesions of organic coatings to a substrate10.1016/0300-9440(95)00572-2 ↗
46. Adherent metallization of plastic composites10.1016/0257-8972(91)90050-7 ↗
47. Adhesion of a thin silicon oxide film on a polycarbonate substrate10.1016/0368-2048(93)80159-J ↗
48. Surface modification of PMMA by DC glow discharge and microwave plasma treatment for the improvement of coating adhesion10.1016/S0257-8972(01)01202-6 ↗
49. In vitro calcium phosphate growth over surface modified PMMA film10.1016/S0142-9612(02)00318-6 ↗
50. Texture developing in TiO2/ORMOSIL composite sol–gel films by ECR etching10.1016/S0167-577X(00)00050-1 ↗
51. Preparation and properties of organic–inorganic hybrids based on poly(methyl methacrylate) and sol–gel polymerized 3-glycidyloxypropyltrimethoxysilane10.1016/j.polymer.2009.03.059 ↗
52. Siliconcarbide embedded hybrid nanocomposites as abrasion resistant coating10.1007/s10904-010-9360-y ↗
53. Optical and surface properties of hybrid TiO2/ormosil planar waveguide prepared by the sol–gel process10.1016/j.ceramint.2004.11.013 ↗
54. Ultraviolet-visible spectroscopic studies of poly(methyl methacrylate) doped with some luminescent materials10.1002/actp.1989.010400512 ↗
55. Rånby · 1975
56. Photodegradation of poly(methyl methacrylate) studied by ESR and viscosity measurements10.1016/0144-2880(82)90023-9 ↗
57. The flattering of the absorption spectrum of suspensions, as compared to that of solutions10.1016/0006-3002(56)90380-8 ↗