journal article·2009-09-22

High Energy Density Nanocomposites Based on Surface-Modified BaTiO3 and a Ferroelectric Polymer

Philseok Kim, Natalie M. Doss, John P. Tillotson, Peter J. Hotchkiss, Ming-Jen Pan, Seth R. Marder, Jiangyu Li, Jeffery P. Calame, Joseph W. Perry

ACS Nano· Volume 3· Issue 9
Publisher page

Abstract

The dielectric permittivity and electric breakdown strength of nanocomposites comprising poly(vinylidene fluoride-co-hexafluoro propylene) and phosphonic acid surface-modified BaTiO(3) nanoparticles have been investigated as a function of the volume fraction of nanoparticles. The mode of binding of pentafluorobenzylphosphonic acid on the BaTiO(3) particles was investigated using infrared and (31)P solid-state nuclear magnetic resonance spectroscopy, and the phosphonic acid was found to form well ordered, tightly bound monolayers. The effective permittivity of nanocomposites with low volume fractions (<50%) was in good agreement with standard theoretical models, with a maximum relative permittivity of 35. However, for nanoparticle volume fractions of greater than 50%, the effective permittivity was observed to decrease with increasing nanoparticle volume fraction, and this was correlated with an increase in porosity of the spin-coated nanocomposite films. The dielectric breakdown strength was also found to decrease with increasing volume fraction of the BaTiO(3) nanoparticles, with an abrupt decrease observed around 10% and a gradual decrease for volume fractions of 20-50%. Comparison of these results with model calculations, using statistical particle packing simulations and effective medium theory for the permittivity and breakdown strength, indicates the important roles of nanoparticle percolation and porosity of the nanocomposites on the dielectric properties. The measured energy density at a field strength of 164 V/mum, well below the breakdown strength, increased to a value of 3.2 J/cm(3) as the nanoparticle volume fraction is increased to 50%, roughly in line with the trend of the permittivity. The calculated maximum energy densities indicate maximal extractable energy (7-8 J/cm(3) at 1 kHz) for two different particle volume fractions, as a result of the interplay of the dependencies of permittivity and breakdown strength on volume fraction.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Dielectric materials and actuators · Ferroelectric and Piezoelectric Materials · Electromagnetic wave absorption materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Chemistry and Biochemistry and Center for Organic Photonics and Electronics, Georgia Institute of Technology, 901 Atlantic Drive, Atlanta, Georgia 30332

Naval Research Laboratory, 4555 Overlook Avenue, Washington, D.C. 20375

Department of Mechanical Engineering, University of Washington, Stevens Way, Box 352600, Seattle, Washington 98195

References (38)

Show source-provided references
1. Kim P. · Appl. Phys. Lett. · 2008 · 93 · 01330210.1063/1.2949320 ↗
2. Rao Y. · IEEE Trans. Adv. Packag. Technol. · 2000 · 23 · 68010.1109/6144.888853 ↗
3. Ramesh S. · IEEE Trans. Adv. Packag. · 2003 · 26 · 1710.1109/TADVP.2003.811365 ↗
4. Schroeder R. · Adv. Mater. · 2005 · 17 · 153510.1002/adma.200401398 ↗
5. Kim P. · Adv. Mater. · 2007 · 19 · 100110.1002/adma.200602422 ↗
6. Jayasundere N. · J. Appl. Phys. · 1993 · 73 · 246210.1063/1.354057 ↗
7. Calame J. P. · J. Appl. Phys. · 2006 · 99 · 08410110.1063/1.2188032 ↗
8. Huang C. · Adv. Funct. Mater. · 2004 · 14 · 50110.1002/adfm.200305021 ↗
9. Gilbert, L. J.; Schuman, T. P.; Dogan, F.In Dielectric Powder/Polymer Composites for High Energy Density Capacitors.Advances in Electronic and Electrochemical Ceramics; Proceedings of the 107th Annual Meeting of The American Ceramic Society, Baltimore, MD;Dogan, F.; Kumta, P. N., Eds.Wiley:Baltimore, MD, 2005.
10. Zhang Q. M. · Science · 1998 · 280 · 210110.1126/science.280.5372.2101 ↗
11. Bai Y. · Appl. Phys. Lett. · 2000 · 76 · 380410.1063/1.126787 ↗
12. Chu B. · Science · 2006 · 313 · 33410.1126/science.1127798 ↗
13. Faria L. O. · Appl. Phys. Lett. · 2006 · 88 · 19290310.1063/1.2202144 ↗
14. Ranjan V. · Phys. Rev. Lett. · 2007 · 99 · 04780110.1103/PhysRevLett.99.047801 ↗
15. Li J. · Adv. Mater. · 2009 · 21 · 21710.1002/adma.200801106 ↗
16. Schulze K. A. · J. Dent. · 2003 · 31 · 37310.1016/S0300-5712(03)00091-5 ↗
17. Kerner E. H. · Proc. Phys. Soc. London, Sec. B · 1956 · 69 · 80210.1088/0370-1301/69/8/304 ↗
18. Kittel C. · 1996
19. Zaky A. A. · 1970
20. Lichtenecker K. · Phys. Zeit. · 1926 · 27 · 115
21. Aspnes D. E. · Am. J. Phys. · 1982 · 50 · 70410.1119/1.12734 ↗
22. Li J. Y. · Appl. Phys. Lett. · 2007 · 90 · 13290110.1063/1.2716847 ↗
23. Li J. Y. · Appl. Phys. Lett. · 2004 · 84 · 312410.1063/1.1702127 ↗
24. Paniagua S. A. · J. Phys. Chem. C · 2008 · 112 · 780910.1021/jp710893k ↗
25. Bars N. L. · J. Phys. III · 1991 · 1 · 707
26. Gao W. · Langmuir · 1996 · 12 · 642910.1021/la9607621 ↗
27. The permittivity for BT was adjusted as a best fit value based on the measured permittivity of P(VDF-HFP) from a set of thin film capacitor devices. Though there are literatures reporting permittivities for sintered BT nanoparticles with grain size of 50 nm, there is a lack of permittivity data for unsintered dispersed BT nanoparticles of this size.
28. He X. · J. Appl. Phys. · 2005 · 97 · 08410110.1063/1.1862323 ↗
29. Malyshkina I. A. · Phys. Solid State · 2006 · 48 · 119710.1134/S1063783406060576 ↗
30. Zhao Z. · Phys. Rev. B · 2004 · 70 · 02410710.1103/PhysRevB.70.024107 ↗
31. Petrovsky V. · J. Am. Ceram. Soc. · 2008 · 91 · 359010.1111/j.1551-2916.2008.02693.x ↗
32. Weibull W. · J. Appl. Mech. · 1951 · 18 · 29310.1115/1.4010337 ↗
33. Tuncer E. · J. Phys. D · 2006 · 39 · 425710.1088/0022-3727/39/19/020 ↗
34. Tuncer E. · Nanotechnology · 2007 · 18 · 02570310.1088/0957-4484/18/2/025703 ↗
35. Davies W. E. V. J. · Nature · 1965 · 205 · 109210.1038/2051092a0 ↗
36. Tuncer E. · Nanotechnology · 2007 · 18 · 32570410.1088/0957-4484/18/32/325704 ↗
37. O’Dwyer J. J. · 1964
38. Rice R. W. · 1998