An Electrochromic Painter’s Palette: Color Mixing via Solution Co-Processing

Electrochromic polymers (ECPs) have been shown to be synthetically tunable, producing a full palette of vibrantly colored to highly transmissive polymers. The development of these colored-to-transmissive ECPs employed synthetic design strategies for broad color targeting; however, due to the subtleties of color perception and the intricacies of polymer structure and color relationships, fine color control is difficult. In contrast, color mixing is a well-established practice in the printing industry. We have identified three colored-to-transmissive switching electrochromic polymers, referred to as ECP-Cyan (ECP-C), ECP-Magenta (ECP-M), and ECP-Yellow (ECP-Y), which, via the co-processing of multicomponent ECP mixtures, follow the CMY color mixing model. The presented work qualitatively assesses the thin film characteristics of solution co-processed ECP mixtures. To quantitatively determine the predictability of the color properties of ECP mixtures, we estimated mass extinction coefficients (εmass) from solution spectra of the CMY ECPs and compared the estimated and experimentally observed color values of blends via a calculated color difference (ΔEab). The values of ΔEab range from 8 to 26 across all mixture compositions, with an average value of 15, representing a reasonable degree of agreement between predicted and observed color values. We demonstrate here the ability to co-process ECP mixtures into vibrantly colored, visually continuous films and the ability to estimate the color properties produced in these mixed ECP films.