journal article·2002-11

Structure and Some Properties of Pb(Zr,Ti)O 3 Thin Films

Asya F. Andreeva, Anatolii M. Kasumov

Powder Metallurgy and Metal Ceramics· Volume 41· Issue 11-12
Publisher page

Abstract

The possibility of obtaining Pb(Zr,Ti)O3 (PZT) films by oxidation of Pb ― Zr ― Ti layers was investigated. The films were obtained by vacuum evaporation on a polished SiO2 or glassceramics at 300-800 K. The PZT films obtained at 500 K were amorphous. With a rise in the condensation temperature to 600 K, film crystallization occurred in the perovskite structure. The dielectric and optical properties of PZT films were investigated. For metal ― dielectric ― metal (MDM) structures based on PZT films with a thickness of 0.8 μm, the capacity was 2.60 μF, which corresponds to a value of the dielectric constant of about 74,880. The energy-gap width determined by the short-wave boundary of self-absorption was equal to 3.5 eV. The advantages of the proposed method for obtaining PZT films are low deposition temperatures and the possibility of performing all technology in one cycle, including modification of the composition and properties of the films by doping.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. A. Lozinski, F. Wang, et al., “PZT thick films for pyroelectric sensors,” Meas. Sci. Technol. 8 34–37 (1997).10.1088/0957-0233/8/1/005 ↗
2. B. Morten, et al., “Resonant pressure sensor based on piezoelectric properties of ferroelectric thick films,” Sens. and Act. A 31 153–158 (1992).10.1016/0924-4247(92)80096-L ↗
3. N. M. White and V. T. K. Ko, “Thick film acoustic wave sensor structure,” Electronics LettersAugust, 1807-1808 (1993).10.1049/el:19931202 ↗
4. Proceedings of the 1 st European meeting on integrated ferroelectrics(1995), pp. 29, 340.
5. D. P. Birnie, et al., “Coating uniformity and device applicability of spin coated sol-gel PZT films,” Microelectronic Engineering 29 189–192 (1995).10.1016/0167-9317(95)00142-5 ↗
6. M. Tyunina, et al., “Relaxor behavior of pulsed laser deposited ferroelectrics (Pb1 - xLax)(Zr0.65Ti0.35)O3 films,” J. Appl. Phys. 84 6800–6810 (1998).10.1063/1.369012 ↗
7. H. Schmitt, J. Mendiola, F. Carmona, et al., “Sputtering of ferroelectrics (PbCa)TiO3 films,” Microelectronic Engineering 29 181–184 (1995).10.1016/0167-9317(95)00140-9 ↗
8. T. Maeder, P. Muralt, L. Sagalowicz, and N. Setter, “In-situ sputter deposition of Pt and PZT films on Platinum and RuO2 electrodes,” Microelectronic Engineering 29 177–180 (1995).10.1016/0167-9317(95)00139-5 ↗
9. Yu. Tomashewski, Film ferroelectricsRadio i svyaz, Moscow (1984), 193 p.
10. X-ray Powder Data File ASTM, Special Technical Publication (1975).