journal article·2020-01

Interaction of Yttrium, Lanthanum, and Samarium Oxides at 1600°C

O. V. Chudinovych, S. F. Korichev, E. R. Andrievskaya

Powder Metallurgy and Metal Ceramics· Volume 58· Issue 9-10
Publisher page

Abstract

Phase equilibria and structural transformations in the La2O3–Y2O3–Sm2O3 system at 1600°C were studied by X-ray diffraction and petrography over the entire composition range. Solid solutions based on the hexagonal (A) modification of La2O3, cubic (C) modification of Y2O3, and monoclinic (B) modification of La2O3 (Sm2O3) were found to form in the system. The starting materials were La2O3, Sm2O3, and Y2O3 (99.99 %) powders. The samples were prepared from nitrate solutions with subsequent evaporation and decomposition at 800oC for 2 h. The samples were subjected to heat treatment in three stages: at 1100°C (for 2464 h), at 1500°C (for 50 h), and then at 1600°C (for 10 h) in furnaces with Fechral (H23U5T) and Superkanthal (MoSi2) heating elements, respectively. The isothermal section of the La2O3–Y2O3–Sm2O3 phase diagram at 1600°C is characterized by three single-phase (A-La2O3, B-La2O3 (Sm2O3), C-Y2O3) and two-phase (A + B, B + C) regions. The ordered phase of perovskite-type was not found at 1600°C in this system. An infinite series of solid solutions based on the monoclinic modification of B-La2O3 (Sm2O3), which occupies the largest area of the isothermal section, forms in the system. Yttrium oxide stabilizes the total mutual solubility of lanthanum and samarium oxides. The lattice parameters of the B phase decrease, the lattice volume increases with the addition of a heavier ion, and the lattice of solid solutions based on the B modification of rare earth metal oxides becomes more densely packed with higher yttrium oxide. The lattice parameters of the B phase lattice vary from a = 1.3988 nm, b = 0.3774 nm, and c = 0.8427 nm in the single-phase sample containing 15 mol.% Y2O3–42.5 mol.% La2O3– 42.5 mol.% Sm2O3 to a = 1.3806 nm, b = 0.3709 nm, and c = 0.8312 nm in the two-phase sample containing 45 mol.% Y2O3–27.5 mol.% La2O3–27.5 mol.% Sm2O3.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Luminescence Properties of Advanced Materials · Nuclear materials and radiation effects · Microwave Dielectric Ceramics Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. S.F. Wang, J. Zhang, and D.W. Luo, “Transparent ceramics: Processing, materials and applications,” Prog. Solid State Chem., 41, 20–54 (2013).10.1016/j.progsolidstchem.2012.12.002 ↗
2. S. Jas, S. Bayya, and G. Villalobos, “Transparent ceramics for high-energy laser systems,” Opt. Mater., 33, 511–518 (2011).10.1016/j.optmat.2010.10.038 ↗
3. B. Marek, Z. Librant, A. Wajler, W. Wesolowski, and H. Weglarz, “Fracture toughness, strength and creep of transparent ceramics at high temperature,”Ceram. Int., 38, 4517–4524 (2012).
4. Shi. Chen By and W. Yiquan, “New opportunities for transparent ceramics,”Am. Ceram. Soc. Bull., No. 2, 32–37 (2013).
5. J. Akiyama, Y. Sato, and T. Taira, “Laser ceramics with rare-earth-doped anisotropic materials,” Opt. Lett., 35, No. 21, 3598–3600 (2010).10.1364/OL.35.003598 ↗
6. T. Taira, “Domain-controlled laser ceramics toward giant micro-photonics,” Opt. Mater. Express, 1, Issue 5, 1040–1050 (2011).10.1364/OME.1.001040 ↗
7. M. Zinkevich, “Thermodynamics of rare earth sesguioxides,” Prog. Mater. Sci., 52, 597–647 (2007).10.1016/j.pmatsci.2006.09.002 ↗
8. M. Yoshimura and X.-Z. Rong, “Various solid solutions in the systems Y2O3–R2O3 (R — La, Nd, and Sm) at high temperature,” J. Mater. Sci. Lett., 16, 1961–1963 (1997).10.1023/A:1018559322304 ↗
9. E.R. Andrievskaya, Phase Equilibria in Systems of Hafnium, Zirconium, and Yttrium Oxides with Rare Earth Element Oxides [in Russian], Naukova Dumka, Kyiv (2010), p. 470.
10. E.R. Andrievskaya, “Phase equilibria in the refractory oxide systems of zirconia, hafnia and yttria with rare–earth oxides,” J. Eur. Ceram. Soc., 28, No. 12, 2363–2388 (2008).10.1016/j.jeurceramsoc.2008.01.009 ↗
11. J. Coutures, A. Rouanet, R. Verges, and M. Foex, “High-temperature study of systems formed by lanthanum sesquioxide and lanthanide sesquioxides. I. Phase diagrams (1400°C < T < T Liquidus),” J. Solid State Chem., 17, No. 1–2, 171–182 (1976).10.1016/0022-4596(76)90218-8 ↗
12. J. Coutures, F. Sibieude, and M. Foex, “High-temperature study of systems formed by lanthanum sesquioxide and lanthanide sesquioxides. II. Influence of quenching on the nature of phases obtained at room temperature,” J. Solid State Chem., 17, 377–384 (1976).10.1016/S0022-4596(76)80006-0 ↗
13. L.M. Lopato, B.S. Nigmanov, A.V. Shevchenko, and Z.A. Zaitseva, “Interaction of lanthanum oxide with yttrium oxide,” Izv. Akad. Nauk SSSR. Neorg. Mater., 22, No. 5, 771–774 (1986).
14. V. Berndt, D. Maier, and C. Keller, “New ABO3 interlanthanide perovskite compounds,” J. Solid State Chem., 13, No. 1–2, 131–135 (1975). 60710.1016/0022-4596(75)90090-0 ↗
15. M. Mizuno, A. Rouanet, T. Yamada, and T. Noguchi, “Phase diagram of the system La2O3–Y2O3 at high temperatures,” J. Ceram. Soc. Jpn., 84, No. 7, 342–347 (1976).
16. J. Coutures and M. Foex, “High-temperature study of equilibrium diagrams for systems formed by yttrium sesquioxide,” J. Solid State Chem., 11, No. 4, 294–300 (1974).10.1016/S0022-4596(74)80034-4 ↗
17. W. George, T. Emma, and William H. Rhodes, “Analytical microscopy study of phases and fracture in Y2O3–La2O3 alloys,” J. Am. Ceram. Soc., 71, No. 10, 820–825 (1988).
18. W.H. Rhodes, “Controlled transient solid second phase sintering of yttria,” J. Am. Ceram. Soc., 64, No. 1, 13–17 (1981).10.1111/j.1151-2916.1981.tb09551.x ↗
19. A.V. Shevchenko, B.S. Nigmanov, Z.A. Zaitseva, and L.M. Lopato, “Interaction of samarium and gadolinium oxides with yttrium oxide,” Izv. Akad. Nauk SSSR. Neorg. Mater., 22, No. 5, 775–778 (1986).
20. S.A. Toropov, Phase Diagrams of Refractory Oxide Systems [in Russian], Nauka, Leningrad (1987), p. 822.
21. E.R. Andrievskaya, O.A. Kornienko, and Zh.D. Bogatyreva, “Phase ratio in the La2O3–Sm2O3 system at 1500°C,” Sovr. Probl. Fiz. Materialoved., No. 25, 15–28 (2016).