Filament Disturbance and Fusion during Embedded 3D Printing of Silicones
Source abstract
Abstract
Embedded 3D printing (EMB3D) is an additive manufacturing technique that enables complex fabrication of soft materials including tissues and silicones. In EMB3D, a nozzle writes continuous filaments into a support bath consisting of a yield stress fluid. Lack of fusion defects between filaments can occur because the nozzle pushes support fluid into existing filaments, preventing coalescence. Interfacial tension was previously proposed as a tool to drive interfilament fusion. However, interfacial tension can also drive rupture and shrinkage of printed filaments. Here, we evaluate the efficacy of interfacial tension as a tool to control defects in EMB3D. Using polydimethylsiloxane (PDMS)-based inks with varying amounts of fumed silica and surfactant, printed into Laponite in water supports, we evaluate the effect of rheology, interfacial tension, print speeds, and interfilament spacings on defects. We print pairs of parallel filaments at varying orientations in the bath and use digital image analysis to quantify shrinkage, rupture, fusion, and positioning defects. By comparing disturbed filaments to printed pairs of filaments, we disentangle the effects of nozzle movement and filament extrusion. Critically, we find that capillary instabilities and interfilament fusion scale with the balance between support rheology and interfacial tension. Less viscous supports and higher interfacial tensions lead to more shrinkage and rupture at all points in the printing process, from relaxation after writing, to disturbance of the line, to writing of a second line. It is necessary to overextrude material to achieve interfilament fusion, particularly at high support viscosities and low interfacial tensions. Finally, fusion quality varies with printing orientation, and writing neighboring filaments causes displacement of existing structures. As such, specialized slicers are needed for EMB3D that consider the tighter spacings and orientation-dependent spacings necessary to achieve precise control over printed shapes.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · 3D Printing in Biomedical Research · Nanofabrication and Lithography Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Material Measurement Laboratory, National Institute of Standards and Technology, 100 Bureau Drive, Gaithersburg, Maryland 20899, United States
Funding
Material Measurement Laboratory
References (62)
Show source-provided references
1. 10.1016/j.mtbio.2023.10087010.1016/j.mtbio.2023.100870 ↗
2. 10.1016/j.actbio.2015.01.03410.1016/j.actbio.2015.01.034 ↗
3. 10.1088/1748-6041/4/6/06500510.1088/1748-6041/4/6/065005 ↗
4. 10.1016/j.jconrel.2023.12.05110.1016/j.jconrel.2023.12.051 ↗
5. 10.1039/D2BM02060B10.1039/D2BM02060B ↗
6. 10.1007/s42242-023-00255-110.1007/s42242-023-00255-1 ↗
7. 10.1039/D3BM00626C10.1039/D3BM00626C ↗
8. 10.1016/j.bprint.2022.e0022310.1016/j.bprint.2022.e00223 ↗
9. 10.1063/5.003277710.1063/5.0032777 ↗
10. 10.1557/mrs.2017.16710.1557/mrs.2017.167 ↗
11. 10.1021/acsami.7b1981810.1021/acsami.7b19818 ↗
12. 10.1002/advs.20220460910.1002/advs.202204609 ↗
13. 10.1016/j.bprint.2023.e0027210.1016/j.bprint.2023.e00272 ↗
14. Friedrich, L.; Gunther, R. T. Simulated Inter-Filament Fusion in Embedded 3D Printing. 2024 Under review.10.1088/1758-5090/ad8fd5 ↗
15. 10.1002/admt.20220098410.1002/admt.202200984 ↗
16. 10.1021/acsami.7b0239810.1021/acsami.7b02398 ↗
17. 10.1371/journal.pone.019489010.1371/journal.pone.0194890 ↗
18. 10.1021/acsami.2c1246510.1021/acsami.2c12465 ↗
19. 10.1126/sciadv.150065510.1126/sciadv.1500655 ↗
20. 10.1126/sciadv.160280010.1126/sciadv.1602800 ↗
21. 10.1021/acsami.0c0412110.1021/acsami.0c04121 ↗
22. 10.1016/j.apmt.2021.10100510.1016/j.apmt.2021.101005 ↗
23. 10.1016/j.addma.2023.10356610.1016/j.addma.2023.103566 ↗
24. 10.1021/acsbiomaterials.6b0017010.1021/acsbiomaterials.6b00170 ↗
25. 10.1126/sciadv.150075810.1126/sciadv.1500758 ↗
26. 10.1126/science.ade444110.1126/science.ade4441 ↗
27. 10.1002/adma.20190463110.1002/adma.201904631 ↗
28. 10.1021/acsami.2c0804710.1021/acsami.2c08047 ↗
29. 10.1039/D0SM01971B10.1039/D0SM01971B ↗
30. 10.1021/nl400774410.1021/nl4007744 ↗
31. Friedrich, L. M.; Woodcock, J. W.Videos of Single, Double, and Triple Filaments in Embedded 3D Printing, 2024.
32. Friedrich, L. M.Digital Image Analysis Tools for Pairs of Filaments in Embedded 3D Printing, 2024.
33. 10.1007/s10570-023-05152-510.1007/s10570-023-05152-5 ↗
34. 10.1002/marc.20210044510.1002/marc.202100445 ↗
35. 10.1021/acsnano.9b0508810.1021/acsnano.9b05088 ↗
36. 10.1021/la011420k10.1021/la011420k ↗
37. 10.1021/la902759s10.1021/la902759s ↗
38. 10.1016/j.clay.2011.10.01510.1016/j.clay.2011.10.015 ↗
39. Friedrich, L. M.Tailored composite microstructures via direct ink writing with acoustophoresis; Ph.D. thesis, University of California: Santa Barbara, 2020.
40. 10.1007/s00289-012-0782-210.1007/s00289-012-0782-2 ↗
41. Friedrich, L. M.; Vining, B. L.ShopbotPyQt. usnistgov Github2023.
42. Bradski G. · Dr. Dobb’s J. Softw. Tools · 2000 · 120 · 122
43. Van Rossum G. · 2009
44. 10.1016/j.colsurfa.2013.03.01010.1016/j.colsurfa.2013.03.010 ↗
45. 10.1021/acsapm.0c0012610.1021/acsapm.0c00126 ↗
46. 10.1016/j.jnnfm.2011.12.00510.1016/j.jnnfm.2011.12.005 ↗
47. 10.1002/aic.1622010.1002/aic.16220 ↗
48. 10.1146/annurev-matsci-070909-10450210.1146/annurev-matsci-070909-104502 ↗
49. 10.1016/j.ces.2006.01.02910.1016/j.ces.2006.01.029 ↗
50. 10.1039/D1SM00731A10.1039/D1SM00731A ↗
51. 10.1021/acsami.2c0922110.1021/acsami.2c09221 ↗
52. 10.1063/1.86965010.1063/1.869650 ↗
53. 10.1126/sciadv.abq082810.1126/sciadv.abq0828 ↗
54. 10.1080/17452759.2023.220977810.1080/17452759.2023.2209778 ↗
55. 10.1002/adhm.20150067710.1002/adhm.201500677 ↗
56. 10.1016/j.compositesb.2023.11085110.1016/j.compositesb.2023.110851 ↗
57. 10.1016/j.bprint.2023.e0025810.1016/j.bprint.2023.e00258 ↗
58. 10.1016/j.bprint.2022.e0024210.1016/j.bprint.2022.e00242 ↗
59. 10.1021/acsapm.0c0120810.1021/acsapm.0c01208 ↗
60. 10.1021/acsami.2c0904110.1021/acsami.2c09041 ↗
61. 10.1101/2022.09.10.50742010.1101/2022.09.10.507420 ↗
62. 10.1063/5.010257310.1063/5.0102573 ↗