journal article·2016-02

Modification of nanocrystalline cellulose for application as a reinforcing nanofiller in PMMA composites

Alojz Anžlovar, Miro Huskić, Ema Žagar

Cellulose· Volume 23· Issue 1
Publisher page

Abstract

Nanocrystalline cellulose (NCC) with particle length of 100–500 nm was prepared from microcrystalline cellulose and modified with a reversible addition–fragmentation chain transfer (RAFT) agent, i.e., 4-cyano-4-(phenylcarbonothioylthio)pentanoic acid (CPADB). From the surface of CPADB-modified NCC, methyl methacrylate (MMA) was grafted to produce poly(methyl methacrylate) (PMMA)-modified NCC. Unmodified NCC, CPADB-modified NCC, and PMMA-modified NCC were further used as reinforcing nanofillers in PMMA composite plates prepared by bulk polymerization of MMA. Regardless of NCC type, the PMMA plates were transparent to visible light at low NCC concentrations but became translucent with increasing NCC concentration. At given NCC concentration, the visible-light transparency of the PMMA/NCC composites decreased in the order PMMA-modified NCC, CPADB-modified NCC, unmodified NCC. PMMA-modified NCC and CPADB-modified NCC showed moderate potential for reinforcing the PMMA matrix, while unmodified NCC detrimentally affected the mechanical properties of the PMMA composites due to more pronounced particle aggregation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Cellulose Research Studies · Electrospun Nanofibers in Biomedical Applications · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Anžlovar A, Orel ZC, Kogej K, Žigon M (2012) Polyol-mediated synthesis of zinc oxide nanorods and nanocomposites with poly(methyl methacrylate). J Nanomater 2012:76087210.1155/2012/760872 ↗
2. Barsbay M, Gluven O, Davis TP, Kowollik CB, Barner L (2009) RAFT-mediated polymerization and grafting of sodium 4-styrene sulphonate from cellulose initiated via γ-radiation. Polymer 50:973–98210.1016/j.polymer.2008.12.027 ↗
3. Bataille P, Statioukha G, Statioukha O (1996) Simulation and optimization of cellulose and styrene graft copolymerization process. Can J Chem Eng 74(4):501–51010.1002/cjce.5450740410 ↗
4. Bondeson D, Mathew A, Oksman K (2006) Optimization of the isolation of nanocrystals from microcrystalline cellulose by acid hydrolysis. Cellulose 13:171–18010.1007/s10570-006-9061-4 ↗
5. Carlmark A (2013) Tailoring cellulose surfaces by controlled polymerization methods. Macromol Chem Phys 214:1539–154410.1002/macp.201300272 ↗
6. Cohen SG, Haas HC (1950) Studies on the structure of hydroxyethylcellulose. J Am Chem Soc 72:3954–395810.1021/ja01165a033 ↗
7. Cooper W, Smith RK (1960) Pfropfpolymere aus cellulose und äthylenimin. Makromol Chem 40:148–16010.1002/macp.1960.020400114 ↗
8. Ding P, Zhang J, Song N, Tang SF, Liu YM, Shi LY (2015) Growing polystyrene chains from the surface of graphene layers via RAFT polymerization and the influence on their thermal properties. Comp Part A Appl Sci Manuf 69:186–19410.1016/j.compositesa.2014.11.020 ↗
9. Dufresne A (2013) Nanocellulose: a new ageless bionanomaterial. Mater Today 16:220–22710.1016/j.mattod.2013.06.004 ↗
10. Duran N, Lemes AP, Seabra AB (2012) Review of cellulose nanocrystal patents: preparation, composites and general applications. Recent Pat Nanotechnol 6:16–2810.2174/187221012798109255 ↗
11. Habibi Y, Lucia LA, Rojas OJ (2010) Cellulose nanocrystals: chemistry, self-assembly, and applications. Chem Rev 110:3479–350010.1021/cr900339w ↗
12. Habibi Y (2014) Key advances in the chemical modification of nanocelluloses. Chem Soc Rev 43:1519–154210.1039/C3CS60204D ↗
13. Hajji P, Cavaille JY, Favier V, Gauthier C, Vigier G (1996) Tensile behavior of nanocomposites from latex and cellulose whiskers. Polym Compos 17(4):612–61910.1002/pc.10651 ↗
14. Hanson S, Trouillet V, Tischer T, Goldmann AS, Carlmark A, Barner-Kowollik C, Malmstroem E (2013) Grafting efficiency of synthetic polymers onto biomaterials: a comparative study of grafting-from versus grafting-to. Biomacromolecules 14:64–7410.1021/bm3013132 ↗
15. Hernandez-Guerrero M, Davis TP, Barner-Kowollik C, Stenzel MH (2005) Polystyrene comb polymers built on cellulose or poly(styrene-co-2-hydroxyethylmethacrylate) backbones as substrates for the preparation of structured honeycomb films. Eur Polym J 41:2264–227710.1016/j.eurpolymj.2005.04.040 ↗
16. Hon NSD, Shiraishi N (2000) Wood and cellulosic chemistry. Marcel Dekker, New York, p 297
17. Huebner D, Koch V, Ebeling B, Mechau J, Steinhoff JE, Vana P (2015) Comparison of monomethoxy-, dimethoxy-, and trimethoxysilane anchor groups for surface-initiated RAFT polymerization from silica surfaces. J Polym Sci Part A Polym Chem 53(1):103–11310.1002/pola.27454 ↗
18. Kalia S, Dufresne A, Cherian BM, Kaith BS, Averous L, Njuguna J, Nassiopoulos E (2011) Cellulose-based bio- and nanocomposites: a review. Int J Polym Sci 2011:837875
19. Klemm D, Kramer F, Moritz S, Lindstroem T, Ankerfors M, Gray D, Dorris A (2011) Nanocelluloses: a new family of nature-based materials. Angew Chem Int Ed 50:5438–546610.1002/anie.201001273 ↗
20. Kos T, Anžlovar A, Pahovnik D, Žagar E, Orel ZC, Žigon M (2013) Zinc-containing block copolymer as a precursor for the in situ formation of nano ZnO and PMMA/ZnO nanocomposites. Macromolecules 46:6942–694810.1021/ma4010296 ↗
21. Kos T, Anžlovar A, Kunaver M, Huskić M, Žagar E (2014a) Fast preparation of nanocrystalline cellulose by microwave-assisted hydrolysis. Cellulose 21:2579–258510.1007/s10570-014-0315-2 ↗
22. Kos T, Anžlovar A, Žagar E, Orel ZC, Žigon M (2014b) PMMA-b-PMAA diblock copolymer as a reactive polymeric surfactant for the functionalization of ZnO nanoparticles. Acta Chim Slov 61:497–505
23. Lahiji RR, Xu X, Riefenberger R, Raman A, Rudie A, Moon RJ (2010) Atomic force microscopy characterization of cellulose nanocrystals. Langmuir 26(6):4480–448810.1021/la903111j ↗
24. Landry V, Alemdar A, Blanchet P (2011) Nanocrystalline cellulose: morphological, physical and mechanical properties. For Prod J 61(2):104–112
25. Ljungberg N, Bonini C, Bortolussi F, Boisson C, Heux L, Cavaille JY (2005) New nanocomposite materials reinforced with cellulose whiskers in atactic polypropylene: effect of surface and dispersion characteristics. Biomacromolecules 6:2732–273910.1021/bm050222v ↗
26. Ljungberg N, Cavaille JY, Heux L (2006) Nanocomposites of isotactic polypropylene reinforced with rod-like cellulose whiskers. Polymer 47:6285–629210.1016/j.polymer.2006.07.013 ↗
27. Lu J, Askeland P, Drzal LT (2008) Surface modification of microfibrillated cellulose for epoxy composite applications. Polymer 49:1285–129610.1016/j.polymer.2008.01.028 ↗
28. Mais U, Binder WH, Knaus S, Gruber H (2000) Synthesis and 13C CP MAS NMR spectroscopy of cellulose-graft-poly(N-acetylenimine). Macromol Chem Phys 201:2115–212210.1002/1521-3935(20001101)201:16<2115::AID-MACP2115>3.0.CO;2-N ↗
29. Miao C, Hamad WY (2013) Cellulose reinforced polymer composites and n anocomposites: a critical review. Cellulose 20:2221–226210.1007/s10570-013-0007-3 ↗
30. Moad G, Rizzardo E, Thang SH (2005) Living radical polymerization by the RAFT process. Aust J Chem 58:379–41010.1071/CH05072 ↗
31. Moad G, Rizzardo E, Thang SH (2006) Living radical polymerization by the RAFT process—a first update. Aust J Chem 59:669–69210.1071/CH06250 ↗
32. Neises B, Steglich W (1987) Simple method for the esterification of carboxylic acids. Angew Chem Int Ed 17:522–52410.1002/anie.197805221 ↗
33. Pavoni E, Bandini E, Benaglia M, Molloy JK, Bergamini G, Ceroni P, Armaroli N (2014) A tailored RAFT copolymer for the dispersion of single walled carbon nanotubes in aqueous media. Polym Chem 5(21):6148–615010.1039/C4PY00893F ↗
34. Pei A, Malho JM, Ruokolainen J, Zhou Q, Berglund LA (2011) Strong nanocomposite reinforcement effects in polyurethane elastomer with low volume fraction of cellulose nanocrystals. Macromolecules 44:4422–442710.1021/ma200318k ↗
35. Rouganin ZA, Zhu UZ (1959) Synthesis of new cellulose and other polysaccharide derivatives—IV The synthesis of carboxymethylcellulose and polycaprolactam graft copolymers. Vyskomol Soed 1(11):1630–1633
36. Roy D, Guthrie JT, Perrier S (2005) Graft polymerization: grafting poly(styrene) from cellulose via reversible addition-fragmentation chain transfer (RAFT) polymerization. Macromolecules 38:10363–1037210.1021/ma0515026 ↗
37. Šturcova A, Davies GR, Eichhorn SJ (2005) Elastic modulus and stress-transfer properties of tunicate cellulose whiskers. Biomacromolecules 6(2):1055–106110.1021/bm049291k ↗
38. Tang YF, Xiang R, Wang M, Zhu JL, Sun TM, Jiang GQ (2014) A biocompatible block glycopolymeric dispersant: synthesis, characterization, and dispersing properties for nano-TiO2. Coll Polym Sci 292(9):2369–237410.1007/s00396-014-3267-z ↗
39. Tastet D, Save M, Charrier F, Charrier B, Ledeuil JB, Dupin JC, Billon L (2011) Functional biohybrid materials synthesized via surface-initiated MADIX/RAFT polymerization from renewable natural wood fiber: grafting of polymer as non leaching preservative. Polymer 52:606–61610.1016/j.polymer.2010.12.046 ↗
40. Xu A, Zhang Y, Zhao Y, Wang J (2013a) Cellulose dissolution at ambient temperature: role of preferential solvation of cations of ionic liquids by a cosolvent. Carbohydr Polym 92:540–54410.1016/j.carbpol.2012.09.028 ↗
41. Xu X, Liu F, Jiang L, Zhu JY, Haagenson D, Wiesenborn P (2013b) Cellulose nanocrystals vs. cellulose nanofibrils: a comparative study on their microstructures and effects as polymer reinforcing agents. ACS Appl Mater Interf 5:2999–300910.1021/am302624t ↗
42. Yang J, Han CR, Duan JF, Ma MG, Zhang XM, Xu F, Sun RC, Xie XM (2012) Studies on the properties and formation mechanism of flexible nanocomposite hydrogels from cellulose nanocrystals and poly(acrylic acid). J Mater Chem 22:22467–2248010.1039/c2jm35498e ↗
43. Yi J, Liu ZT, Liu ZW (2010) Grafting of polystyrene and poly(p-chlorostyrene) from the surface of ramie fiber via RAFT polymerization. J Appl Polym Sci 117:3550–3557
44. Zahran MK (1996) Graft copolymerization of methyl methacrylate and other vinyl monomers onto cotton fabric using ferrous cellulose thiocarbonate-N-bromosuccinimide redox initiation system. J Appl Polym Sci 62(1):49–5710.1002/(SICI)1097-4628(19961003)62:1<49::AID-APP7>3.0.CO;2-S ↗
45. Zeinali E, Haddadi-Asl V, Roghani-Mamaqani H (2014) Nanocrystalline cellulose grafted random copolymers of N-isopropylacrylamide and acrylic acid synthesized by RAFT polymerization: effect of different acrylic acid contents on LCST behaviour. RSC Adv 4:31428–3144210.1039/C4RA05442C ↗
46. Zhang J, Zhang H, Wu J, He J, Xiang J (2010) NMR spectroscopic studies of cellobiose salvation in EmimAc aimed to understand the dissolution mechanism of cellulose in ionic liquids. Phys Chem Chem Phys 12:1941–194710.1039/b920446f ↗
47. Zhou C, Chu R, Wu R, Wu Q (2011a) Electrospun polyethylene oxide/cellulose nanocrystal composite nanofibrous mats with homogeneous and heterogeneous microstructures. Biomacromolecules 12:2617–262510.1021/bm200401p ↗
48. Zhou C, Wu Q, Yue Y, Zhang Q (2011b) Application of rod-shaped cellulose nanocrystals in polyacrylamide hydrogels. J Coll Interface Sci 353:116–12310.1016/j.jcis.2010.09.035 ↗