Extraction and characterization of cellulosic fiber from Centaurea solstitialis for composites
Source abstract
Abstract
With increasing ecological awareness, researchers around the world seek to make composites reinforced with more eco-friendly natural fibers. In this study, Centaurea solstitialis (yellow star thistle) fibers were characterized as a potential natural fiber reinforcement for green composites. Generally, Centaurea solstitialis plants are undesirable because of their detrimental effect on other plants. In this respect, they are generally considered economically worthless in terms of the economical aspect. From this point of view, characterizing Centaurea solstitialis and using them as a natural fiber reinforcement material can be more appropriate in terms of waste management. To characterize the Centaurea solstitialis fibers, Scanning Electron Microscopy, Fourier Transform Infrared Spectroscopy, Thermogravimetric Analysis, X-ray Photoelectron Spectroscopy, X-Ray Diffraction Analysis, single fiber tensile test, determinations of density and chemical composition were performed. Centaurea solstitialis fibers have 11.2% hemicellulose and 57.20% cellulose content. The crystallinity index and density of fibers were determined as 71.43% and 1.37 g/cm3, respectively. Also, fibers exhibited relatively high tensile strength with 111.85 ± 24.97 MPa and Young’s modulus with 3.41 ± 0.62 GPa. The thermal resistance temperature of Centaurea solstitialis fibers was found as 273 °C. It is suggested that Centaurea solstitialis fiber is a suitable reinforcement candidate for composites with low density, low cost, abundancy and relatively high tensile strength.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · biodegradable polymer synthesis and properties · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Abdul Khalil HPS, Yusra AFI, Bhat AH, Jawaid M (2010) Cell wall ultrastructure, anatomy, lignin distribution, and chemical composition of Malaysian cultivated kenaf fiber. Ind Crops Prod. https://doi.org/10.1016/j.indcrop.2009.09.00810.1016/j.indcrop.2009.09.008 ↗
2. Alvarez V, Rodriguez E, Vázquez A (2006) Thermal degradation and decomposition of jute/vinylester composites. J Therm Anal Calorim 85(2):383–389. https://doi.org/10.1007/s10973-005-7102-010.1007/s10973-005-7102-0 ↗
3. Amroune S, Bezazi A, Belaadi A et al (2015) Tensile mechanical properties and surface chemical sensitivity of technical fibres from date palm fruit branches (Phoenix dactylifera L.). Compos Part A Appl Sci Manuf. https://doi.org/10.1016/j.compositesa.2014.12.01110.1016/j.compositesa.2014.12.011 ↗
4. Amroune S, Bezazi A, Dufresne A et al (2019) Investigation of the date palm fiber for green composites reinforcement: thermo-physical and mechanical properties of the fiber. J Nat Fibers. https://doi.org/10.1080/15440478.2019.164579110.1080/15440478.2019.1645791 ↗
5. Arib RMN, Sapuan SM, Ahmad MMHM et al (2006) Mechanical properties of pineapple leaf fibre reinforced polypropylene composites. Mater Des. https://doi.org/10.1016/j.matdes.2004.11.00910.1016/j.matdes.2004.11.009 ↗
6. Arthanarieswaran VP, Kumaravel A, Saravanakumar SS (2015) Characterization of new natural cellulosic fiber from Acacia leucophloea bark. Int J Polym Anal Charact. https://doi.org/10.1080/1023666X.2015.101873710.1080/1023666X.2015.1018737 ↗
7. Balasundar P, Narayanasamy P, Senthamaraikannan P et al (2018) Extraction and characterization of new natural cellulosic chloris barbata fiber. J Nat Fibers. https://doi.org/10.1080/15440478.2017.134901510.1080/15440478.2017.1349015 ↗
8. Baskaran PG, Kathiresan M, Senthamaraikannan P, Saravanakumar SS (2018) Characterization of new natural cellulosic fiber from the bark of Dichrostachys cinerea. J Nat Fibers. https://doi.org/10.1080/15440478.2017.130431410.1080/15440478.2017.1304314 ↗
9. Bezazi A, Amroune S, Scarpa F et al (2020) Investigation of the date palm fiber for green composites reinforcement: quasi-static and fatigue characterization of the fiber. Ind Crops Prod. https://doi.org/10.1016/j.indcrop.2020.11213510.1016/j.indcrop.2020.112135 ↗
10. Bulut Y, Aksit A (2013) A comparative study on chemical treatment of jute fiber: potassium dichromate, potassium permanganate and sodium perborate trihydrate. Cellulose. https://doi.org/10.1007/s10570-013-0049-610.1007/s10570-013-0049-6 ↗
11. Chandramohan D, Marimuthu K (2011) A review on natural fibers. Int J Res Rev Appl Sci 8(2):194–206
12. Csiszár E, Fekete E, Tóth A et al (2013) Effect of particle size on the surface properties and morphology of ground flax. Carbohydr Polym. https://doi.org/10.1016/j.carbpol.2013.02.02610.1016/j.carbpol.2013.02.026 ↗
13. Dalmis R, Kilic GB, Seki Y et al (2020a) Characterization of a novel natural cellulosic fiber extracted from the stem of Chrysanthemum morifolium. Cellulose. https://doi.org/10.1007/s10570-020-03385-210.1007/s10570-020-03385-2 ↗
14. Dalmis R, Köktaş S, Seki Y, Kılınç A (2020b) Characterization of a new natural cellulose based fiber from Hierochloe odarata. Cellulose. https://doi.org/10.1007/s10570-019-02779-110.1007/s10570-019-02779-1 ↗
15. De Rosa IM, Kenny JM, Puglia D et al (2010) Morphological, thermal and mechanical characterization of okra (Abelmoschus esculentus) fibres as potential reinforcement in polymer composites. Compos Sci Technol. https://doi.org/10.1016/j.compscitech.2009.09.01310.1016/j.compscitech.2009.09.013 ↗
16. Dukes JS, Chiariello NR, Loarie SR, Field CB (2011) Strong response of an invasive plant species (Centaurea solstitialis L.) to global environmental changes. Ecol Appl. https://doi.org/10.1890/11-0111.110.1890/11-0111.1 ↗
17. Ehrenstein GW (2012) Polymeric materials: structure, properties, applications. Carl Hanser Verlag GmbH Co KG
18. Fan M, Dai D, Huang B (2012) Fourier transform infrared spectroscopy for natural fibres. In: Fourier transform—materials analysis10.5772/35482 ↗
19. Fiore V, Scalici T, Valenza A (2014) Characterization of a new natural fiber from Arundo donax L. as potential reinforcement of polymer composites. Carbohydr Polym. https://doi.org/10.1016/j.carbpol.2014.02.01610.1016/j.carbpol.2014.02.016 ↗
20. Frederick TW, Norman W (2004) Natural fibers, plastics and composites
21. Ganapathy T, Sathiskumar R, Senthamaraikannan P et al (2019) Characterization of raw and alkali treated new natural cellulosic fibres extracted from the aerial roots of banyan tree. Int J Biol Macromol. https://doi.org/10.1016/j.ijbiomac.2019.07.13610.1016/j.ijbiomac.2019.07.136 ↗
22. Hierro JL, Eren Ö, Khetsuriani L et al (2009) Germination responses of an invasive species in native and non-native ranges. Oikos. https://doi.org/10.1111/j.1600-0706.2008.17283.x10.1111/j.1600-0706.2008.17283.x ↗
23. Holbery J, Houston D (2006) Natural-fiber-reinforced polymer composites in automotive applications. JOM10.1007/s11837-006-0234-2 ↗
24. Ilangovan M, Guna V, Hu C et al (2018) Curcuma longa L. plant residue as a source for natural cellulose fibers with antimicrobial activity. Ind Crops Prod. https://doi.org/10.1016/j.indcrop.2017.12.04210.1016/j.indcrop.2017.12.042 ↗
25. Indran S, Edwin Raj R, Sreenivasan VS (2014) Characterization of new natural cellulosic fiber from Cissus quadrangularis root. Carbohydr Polym. https://doi.org/10.1016/j.carbpol.2014.04.05110.1016/j.carbpol.2014.04.051 ↗
26. Jústiz-Smith NG, Virgo GJ, Buchanan VE (2008) Potential of Jamaican banana, coconut coir and bagasse fibres as composite materials. Mater Charact. https://doi.org/10.1016/j.matchar.2007.10.01110.1016/j.matchar.2007.10.011 ↗
27. Kalusuraman G, Siva I, Aslan M et al (2019) Evaluation of surface pre-treatments on the surface characteristics modifications in sponge gourd (Luffa Cylindrica) fibers. Mater Res Express. https://doi.org/10.1088/2053-1591/ab325210.1088/2053-1591/ab3252 ↗
28. Kilinc AC, Atagur M, Ozdemir O et al (2016) Manufacturing and characterization of vine stem reinforced high density polyethylene composites. Compos Part B Eng. https://doi.org/10.1016/j.compositesb.2016.01.03310.1016/j.compositesb.2016.01.033 ↗
29. Kılınç A, Köktaş S, Seki Y et al (2018) Extraction and investigation of lightweight and porous natural fiber from Conium maculatum as a potential reinforcement for composite materials in transportation. Compos Part B Eng. https://doi.org/10.1016/j.compositesb.2017.11.05910.1016/j.compositesb.2017.11.059 ↗
30. Kommula VP, Reddy KO, Shukla M et al (2013) Physico-chemical, Tensile, and Thermal Characterization of Napier Grass (Native African) Fiber Strands. Int J Polym Anal Charact. https://doi.org/10.1080/1023666X.2013.78493510.1080/1023666X.2013.784935 ↗
31. Li X, Tabil LG, Panigrahi S (2007) Chemical treatments of natural fiber for use in natural fiber-reinforced composites: a review. J. Polym. Environ10.1007/s10924-006-0042-3 ↗
32. Lu-Irving P, Harenčár JG, Sounart H et al (2019) Native and invading yellow starthistle (Centaurea solstitialis) microbiomes differ in composition and diversity of bacteria. mSphere. https://doi.org/10.1128/msphere.00088-1910.1128/msphere.00088-19 ↗
33. Maache M, Bezazi A, Amroune S et al (2017) Characterization of a novel natural cellulosic fiber from Juncus effusus L. Carbohydr Polym. https://doi.org/10.1016/j.carbpol.2017.04.09610.1016/j.carbpol.2017.04.096 ↗
34. Maheshwaran MV, Hyness NRJ, Senthamaraikannan P et al (2018) Characterization of natural cellulosic fiber from Epipremnum aureum stem. J Nat Fibers. https://doi.org/10.1080/15440478.2017.136420510.1080/15440478.2017.1364205 ↗
35. Manfredi LB, Rodríguez ES, Wladyka-Przybylak M, Vázquez A (2006) Thermal degradation and fire resistance of unsaturated polyester, modified acrylic resins and their composites with natural fibres. Polym Degrad Stab. https://doi.org/10.1016/j.polymdegradstab.2005.05.00310.1016/j.polymdegradstab.2005.05.003 ↗
36. Manimaran P, Saravanakumar SS, Mithun NK, Senthamaraikannan P (2016) Physicochemical properties of new cellulosic fibers from the bark of Acacia arabica. Int J Polym Anal Charact. https://doi.org/10.1080/1023666X.2016.117769910.1080/1023666X.2016.1177699 ↗
37. Manimaran P, Senthamaraikannan P, Sanjay MR et al (2018) Study on characterization of Furcraea foetida new natural fiber as composite reinforcement for lightweight applications. Carbohydr Polym. https://doi.org/10.1016/j.carbpol.2017.11.09910.1016/j.carbpol.2017.11.099 ↗
38. Manimaran P, Saravanan SP, Prithiviraj M (2019) Investigation of physico chemical properties and characterization of new natural cellulosic fibers from the bark of Ficus Racemosa. J Nat Fibers. https://doi.org/10.1080/15440478.2019.162123310.1080/15440478.2019.1621233 ↗
39. Moshi AAM, Ravindran D, Bharathi SRS et al (2020) Characterization of a new cellulosic natural fiber extracted from the root of Ficus religiosa tree. Int J Biol Macromol. https://doi.org/10.1016/j.ijbiomac.2019.09.09410.1016/j.ijbiomac.2019.09.094 ↗
40. Munawar SS, Umemura K, Kawai S (2007) Characterization of the morphological, physical, and mechanical properties of seven nonwood plant fiber bundles. J Wood Sci. https://doi.org/10.1007/s10086-006-0836-x10.1007/s10086-006-0836-x ↗
41. Mylsamy K, Rajendran I (2010) Investigation on physio-chemical and mechanical properties of raw and alkali-treated Agave americana fiber. J Reinf Plast Compos. https://doi.org/10.1177/073168441036281710.1177/0731684410362817 ↗
42. Nabi Saheb D, Jog JP (1999) Natural fiber polymer composites: a review. Adv Polym Technol. https://doi.org/10.1002/(SICI)1098-2329(199924)18:4<351::AID-ADV6>3.0.CO;2-X10.1002/(SICI)1098-2329(199924)18:4<351::AID-ADV6>3.0.CO;2-X ↗
43. Nilsson T, Gustafsson PJ (2007) Influence of dislocations and plasticity on the tensile behaviour of flax and hemp fibres. Compos Part A Appl Sci Manuf. https://doi.org/10.1016/j.compositesa.2007.01.01810.1016/j.compositesa.2007.01.018 ↗
44. Oh SY, Dong IY, Shin Y et al (2005) Crystalline structure analysis of cellulose treated with sodium hydroxide and carbon dioxide by means of X-ray diffraction and FTIR spectroscopy. Carbohydr Res. https://doi.org/10.1016/j.carres.2005.08.00710.1016/j.carres.2005.08.007 ↗
45. Poletto M, Ornaghi Jnior HL, Zattera AJ (2015) Thermal decomposition of natural fibers: kinetics and degradation mechanisms. In: Reactions and mechanisms in thermal analysis of advanced materials10.1002/9781119117711.ch21 ↗
46. Porras A, Maranon A, Ashcroft IA (2015) Characterization of a novel natural cellulose fabric from Manicaria saccifera palm as possible reinforcement of composite materials. Compos Part B Eng. https://doi.org/10.1016/j.compositesb.2014.12.03310.1016/j.compositesb.2014.12.033 ↗
47. Ridzuan MJM, Abdul Majid MS, Afendi M et al (2016) Characterisation of natural cellulosic fibre from Pennisetum purpureum stem as potential reinforcement of polymer composites. Mater Des. https://doi.org/10.1016/j.matdes.2015.10.05210.1016/j.matdes.2015.10.052 ↗
48. Rout J, Misra M, Tripathy SS et al (2001) The influence of fibre treatment of the performance of coir-polyester composites. Compos Sci Technol. https://doi.org/10.1016/S0266-3538(01)00021-510.1016/S0266-3538(01)00021-5 ↗
49. Sanjay MR, Madhu P, Jawaid M et al (2018) Characterization and properties of natural fiber polymer composites: a comprehensive review. J Clean Prod10.1016/j.jclepro.2017.10.101 ↗
50. Segal L, Creely JJ, Martin AE, Conrad CM (1959) An empirical method for estimating the degree of crystallinity of native cellulose using the x-ray diffractometer. Text Res J. https://doi.org/10.1177/00405175590290100310.1177/004051755902901003 ↗
51. Seki Y, Kılınç A, Dalmis R et al (2018) Surface modification of new cellulose fiber extracted from Conium maculatum plant: a comparative study. Cellulose. https://doi.org/10.1007/s10570-018-1797-010.1007/s10570-018-1797-0 ↗
52. Seki Y, Köktaş S, Kilinc AC, Dalmis R (2019) Green alternative treatment for cellulosic fibers: ionic liquid modification of Abelmoschus esculentus fibers with methyl-tri-n-butyl ammonium methyl sulphate. Mater Res Express. https://doi.org/10.1088/2053-1591/ab201510.1088/2053-1591/ab2015 ↗
53. Senthamaraikannan P, Kathiresan M (2018) Characterization of raw and alkali treated new natural cellulosic fiber from Coccinia grandis.L. Carbohydr Polym. https://doi.org/10.1016/j.carbpol.2018.01.07210.1016/j.carbpol.2018.01.072 ↗
54. Šernek M, Kamke FA, Glasser WG (2004) Comparative analysis of inactivated wood surface. Holzforschung. https://doi.org/10.1515/HF.2004.00410.1515/HF.2004.004 ↗
55. Sgriccia N, Hawley MC, Misra M (2005) Microwave processing of natural fiber composites and their characterization. In: Global Plastics Environmental Conference 2005: GPEC 2005 - Creating Sustainability for the Environment
56. Sgriccia N, Hawley MC, Misra M (2008) Characterization of natural fiber surfaces and natural fiber composites. Compos Part A Appl Sci Manuf. https://doi.org/10.1016/j.compositesa.2008.07.00710.1016/j.compositesa.2008.07.007 ↗
57. Shyam Kumar R, Balasundar P, Al-Dhabi NA, Prithivirajan R, Ramkumar T, Bhat KS, Narayanasamy P (2019) A new natural cellulosic pigeon pea (Cajanus cajan) pod fiber characterization for bio-degradable polymeric composites. J Nat Fibers. https://doi.org/10.1080/15440478.2019.168988710.1080/15440478.2019.1689887 ↗
58. Sreenivasan VS, Somasundaram S, Ravindran D et al (2011) Microstructural, physico-chemical and mechanical characterisation of Sansevieria cylindrica fibres - an exploratory investigation. Mater Des. https://doi.org/10.1016/j.matdes.2010.06.00410.1016/j.matdes.2010.06.004 ↗
59. Subramanian SG, Rajkumar R, Ramkumar T (2019) Characterization of natural cellulosic fiber from Cereus Hildmannianus. J Nat Fibers. https://doi.org/10.1080/15440478.2019.162374410.1080/15440478.2019.1623744 ↗
60. Sunny T, Pickering KL, Lim SH (2020) Alkali treatment of hemp fibres for the production of aligned hemp fibre mats for composite reinforcement. Cellulose. https://doi.org/10.1007/s10570-019-02939-310.1007/s10570-019-02939-3 ↗
61. Vijay R, Singaravelu DL (2016) Experimental investigation on the mechanical properties of Cyperus pangorei fibers and jute fiber-based natural fiber composites. Int J Polym Anal Charact. https://doi.org/10.1080/1023666X.2016.119235410.1080/1023666X.2016.1192354 ↗
62. Tawakkal ISMA, Cran MJ, Bigger SW (2016) Interaction and quantification of thymol in active PLA-based materials containing natural fibers. J Appl Polym Sci. https://doi.org/10.1002/app.4216010.1002/app.42160 ↗
63. Vijay R, Lenin Singaravelu D, Vinod A et al (2019) Characterization of raw and alkali treated new natural cellulosic fibers from Tridax procumbens. Int J Biol Macromol. https://doi.org/10.1016/j.ijbiomac.2018.12.05610.1016/j.ijbiomac.2018.12.056 ↗
64. Wambua P, Ivens J, Verpoest I (2003) Natural fibres: can they replace glass in fibre reinforced plastics? Compos Sci Technol. https://doi.org/10.1016/S0266-3538(03)00096-410.1016/S0266-3538(03)00096-4 ↗