Bending properties of compression molded three‐layer long fiber polypropylene composites

Abstract The results of studies on bending properties of three‐layer long fiber polypropylene composites are presented. Thirteen samples with glass fibers of various lengths (i.e., 13, 25, 50 mm and continuous fiber length) in the laminates were prepared by stamping. Bending properties of shorter lengths exhibited a large scatter. On substitution of the middle layer with a continuous glass fiber the scatter was reduced. These results have been explained on the basis of flow models and X‐ray shadowgraphs, which showed that both slippage flow and orientation of the glass fiber during stamping are the major phenomena responsible for the scatter.