Sustainable epoxy composites: corncob cellulose as a reinforcement material

1. Adejumo AL, Azeez L, Oyedeji AO, Adetoro RO, Aderibigbe FA (2020) Nanostructured and surface functionalized corncob as unique adsorbents for anionic dye remediation. SN Appl Sci 2:1–1210.1007/s42452-020-2109-5 ↗

2. Am KR, Chikkatti BS, Sajjan AM, Banapurmath NR, Khan TY, Saleel CA (2024) Facile development of flexible cellulose acetate-lead dioxide membrane electrodes for supercapacitor applications. Next Ener 5:10017810.1016/j.nxener.2024.100178 ↗

3. Andrew JJ, Dhakal HN (2022) Sustainable biobased composites for advanced applications: recent trends and future opportunities–a critical review. Compos Part C Open Access 7:10022010.1016/j.jcomc.2021.100220 ↗

4. Arockiasamy FS, Manoharan B, Santhi VM, Prakalathan K, Periasamy D, Dhandapani A, Natarajan V, Senthilkumar K, Kumar TSM, Ilyas RA (2024) Navigating the nano-world future: harnessing cellulose nanocrystals from green sources for sustainable innovation. Heliyon 11:e4118810.1016/j.heliyon.2024.e41188 ↗

5. ASTM (2014) D638 Standard test method for tensile properties of plastics. ASTM Int, West Conshohocken

6. ASTM (1997) D790, Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials. Annu Book ASTM Stand

7. ASTM (2011) D4812‐11, Standard test method for unnotched cantilever beam impact resistance of plastics. ASTM Book Stand 8

8. Azeez AA, Rhee KY, Park SJ, Hui D (2013) Epoxy clay nanocomposites–processing, properties and applications: a review. Compos Part B Eng 45(1):308–32010.1016/j.compositesb.2012.04.012 ↗

9. Bagheri R, Williams MA, Pearson RA (1997) Use of surface modified recycled rubber particles for toughening of epoxy polymers. Polym Eng Sci 37(2):245–25110.1002/pen.11666 ↗

10. Barari B, Omrani E, Moghadam AD, Menezes PL, Pillai KM, Rohatgi PK (2016) Mechanical, physical and tribological characterization of nano-cellulose fibers reinforced bio-epoxy composites: an attempt to fabricate and scale the ‘Green’composite. Carbohydr Polym 147:282–29310.1016/j.carbpol.2016.03.097 ↗

11. Berber-Villamar NK, Netzahuatl-Muñoz AR, Morales-Barrera L, Chávez-Camarillo GM, Flores-Ortiz CM, Cristiani-Urbina E (2018) Corncob as an effective, eco-friendly, and economic biosorbent for removing the azo dye direct yellow 27 from aqueous solutions. PLoS ONE 13(4):e019642810.1371/journal.pone.0196428 ↗

12. Chinga-Carrasco G (2018) Novel biocomposite engineering and bio-applications. Bioengineering 5(4):8010.3390/bioengineering5040080 ↗

13. Choi JY, Nam J, Yun BY, Kim YU, Kim S (2022) Utilization of corn cob, an essential agricultural residue difficult to disposal: Composite board manufactured improved thermal performance using microencapsulated PCM. Ind Crops Prod 183:11493110.1016/j.indcrop.2022.114931 ↗

14. Fernandes IJ, Santos RV, Santos ECA, Rocha TLAC, Domingues Junior NS, Moraes CAM (2018) Replacement of commercial silica by rice husk ash in epoxy composites: a comparative analysis. Mater Res 21:e2016056210.1590/1980-5373-mr-2016-0562 ↗

15. Fouly A, Abdo HS, Seikh AH, Alluhydan K, Alkhammash HI, Alnaser IA, Abdo MS (2021) Evaluation of mechanical and tribological properties of corn cob-reinforced epoxy-based composites—theoretical and experimental study. Polymers (Basel) 13:440710.3390/polym13244407 ↗

16. Fragassa C, Vannucchi de Camargo F, Santulli C (2024) Sustainable biocomposites: Harnessing the potential of waste seed-based fillers in eco-friendly materials. Sustain 16(4):152610.3390/su16041526 ↗

17. French AD (2014) Idealized powder diffraction patterns for cellulose polymorphs. Cellulose 21:885–89610.1007/s10570-013-0030-4 ↗

18. Gairola S, Naik TP, Sinha S, Singh I (2022) Corncob waste as a potential filler in biocomposites: a decision towards sustainability. Compos C-Open 9:100317

19. Haralakal KK, Ashwini M, Goudar GD, Achappa S, Chikkatti BS, Banapurmath NR, Sajjan AM (2025) Exploring the nature of nano bacterial cellulose-poly (vinyl alcohol) as a composite packaging material. Next Nanotechnol 7:10009910.1016/j.nxnano.2024.100099 ↗

20. Hussain F, Hojjati M, Okamoto M, Gorga RE (2006) Polymer-matrix nanocomposites, processing, manufacturing, and application: an overview. J Compos Mater 40(17):1511–157510.1177/0021998306067321 ↗

21. Kapoor M, Panwar D, Kaira GS (2016) Bioprocesses for enzyme production using agro-industrial wastes: technical challenges and commercialization potential. In: Pandey A, Negi S, Soccol CR (eds) Agro-industrial wastes as feedstock for enzyme production. Academic Press, pp 61–9310.1016/B978-0-12-802392-1.00003-4 ↗

22. Karimi B, Ramezanzadeh B (2017) A comparative study on the effects of ultrathin luminescent graphene oxide quantum dot (GOQD) and graphene oxide (GO) nanosheets on the interfacial interactions and mechanical properties of an epoxy composite. J Colloid Interface Sci 493:62–7610.1016/j.jcis.2017.01.013 ↗

23. Khan NI, Halder S, Goyat MS (2016) Effect of epoxy resin and hardener containing microcapsules on healing efficiency of epoxy adhesive based metal joints. Mater Chem Phys 171:267–27510.1016/j.matchemphys.2016.01.017 ↗

24. Kinloch AJ, Taylor AC (2003) Mechanical and fracture properties of epoxy/inorganic micro-and nano-composites. J Mater Sci Lett. https://doi.org/10.1023/A:102571971580810.1023/A:1025719715808 ↗

25. Kinloch AJ, Taylor AC (2006) The mechanical properties and fracture behaviour of epoxy-inorganic micro-and nano-composites. J Mater Sci 41:3271–329710.1007/s10853-005-5472-0 ↗

26. Kwon SC, Adachi T (2007) Strength and fracture toughness of nano and micron-silica particles bidispersed epoxy composites: evaluated by fragility parameter. J Mater Sci 42:5516–552310.1007/s10853-006-1025-4 ↗

27. Lanna A, Suklueng M, Kasagepongsan C, Suchat S (2020) Performance of novel engineered materials from epoxy resin with modified epoxidized natural rubber and nanocellulose or nanosilica. Adv Polym Tech 2020(1):2123836

28. Lapuz AR, Tsuchikawa S, Inagaki T, Ma T, Migo V (2022) Production of nanocellulose film from abaca fibers. Crystals 12(5):60110.3390/cryst12050601 ↗

29. Le Tan NT, Dam QP, Mai TP, Nguyen DQ (2021) The combination of acidic and alkaline pretreatment for a lignocellulose material in simultaneous saccharification and fermentation (SSF) process. Chem Eng Trans 89:43–48

30. Meng F, Wang G, Du X, Wang Z, Xu S, Zhang Y (2019) Extraction and characterization of cellulose nanofibers and nanocrystals from liquefied banana pseudo-stem residue. Compos B Eng 160:341–34710.1016/j.compositesb.2018.08.048 ↗

31. Mishra P, Kumar P (2014) Enhancement of dielectric properties of 0.2 [BZT-BCT]–0.8 [(1–x) epoxy–xCCTO](x=0.02, 0.04, 0.06, 0.08 & 0.1) composites for embedded capacitor and energy harvesting applications. J Alloys Compd 617:899–90410.1016/j.jallcom.2014.08.029 ↗

32. Mohit H, Selvan VAM (2019) Effect of a novel chemical treatment on nanocellulose fibers for enhancement of mechanical, electrochemical and tribological characteristics of epoxy bio-nanocomposites. Fiber Polym 20:1918–194410.1007/s12221-019-1224-7 ↗

33. Nimbagal V, Banapurmath NR, Umarfarooq MA, Revankar S, Sajjan AM, Soudagar MEM, Elfasakhany A (2023) Mechanical and fracture properties of carbon nano fibers/short carbon fiber epoxy composites. Polym Compos 44(7):3977–398910.1002/pc.27371 ↗

34. Njuguna J, Pielichowski K, Alcock JR (2007) Epoxy-based fibre reinforced nanocomposites. Adv Eng Mater 9(10):835–84710.1002/adem.200700118 ↗

35. Onyeaka HN, Nwabor OF (2022) Natural active components in smart food packaging system. In: Barba FJ, Saraiva JA (eds) Food preservation and safety of natural products. Academic Press, pp 119–13110.1016/B978-0-323-85700-0.00014-9 ↗

36. Peponi L, Puglia D, Torre L, Valentini L, Kenny JM (2014) Processing of nanostructured polymers and advanced polymeric based nanocomposites. Mater Sci Eng R Rep 85:1–4610.1016/j.mser.2014.08.002 ↗

37. Radford KC (1971) The mechanical properties of an epoxy resin with a second phase dispersion. J Mater Sci 6:1286–129110.1007/BF00552042 ↗

38. Raghatate A, Cortes Vega FD, Velazquez Meraz O, Ahmadi K, Chaudhari NM, Solanki D, Robles Hernández FC (2022) Sustainable biocomposites for structural applications with environmental affinity. ACS Appl Mater Interfaces 14(15):17837–1784810.1021/acsami.2c02073 ↗

39. Rana SS, Gupta MK (2021) Fabrication of bionanocomposites reinforced with hemp nanocellulose and evaluation of their mechanical, thermal and dynamic mechanical properties. Proc Inst Mech Eng Part L J Mater des Appl 235(11):2470–2481

40. Rojas M, Ruano D, Orrego-Restrepo E, Chejne F (2023) Non-isothermal kinetics of cellulose, hemicellulose, and lignin degradation during cocoa bean shell pyrolysis. Biomass Bioenergy 177:10693210.1016/j.biombioe.2023.106932 ↗

41. Romruen O, Karbowiak T, Tongdeesoontorn W, Shiekh KA, Rawdkuen S (2022) Extraction and characterization of cellulose from agricultural by-products of Chiang Rai Province, Thailand. Polymers 14(9):183010.3390/polym14091830 ↗

42. Saba N, Mohammad F, Pervaiz M, Jawaid M, Alothman OY, Sain M (2017) Mechanical, morphological and structural properties of cellulose nanofibers reinforced epoxy composites. Int J Biol Macromol 97:190–20010.1016/j.ijbiomac.2017.01.029 ↗

43. Senthamaraikannan P, Dhamodharan K, Sivaraj R, Saravanakumar SS (2025) Isolation and analysis of cellulosic fiber derived from Anisomeles malabaricus stems. J Nat Fibers 22(1):250205510.1080/15440478.2025.2502055 ↗

44. Shao X, Wang J, Liu Z, Hu N, Liu M, Xu Y (2020) Preparation and characterization of porous microcrystalline cellulose from corncob. Ind Crop Prod 151:11245710.1016/j.indcrop.2020.112457 ↗

45. Srivastava VK, Harris B (1994) Effect of particles on interlaminar crack growth in cross-plied carbon-fibre/epoxy laminates. J Mater Sci 29:548–55310.1007/BF01162520 ↗

46. Umarfarooq MA, Dileep K, Srinath A, Banapurmath NR, Sajjan AM (2024) Impact of hybrid nanoparticle reinforcements on mechanical properties of epoxy-polylactic acid (PLA) composites. Fract Struct Integr 18(70):91–10410.3221/IGF-ESIS.70.05 ↗

47. Umarfarooq MA, Choukimath M, Banapurmath NR (2025) Mechanical, fracture, and thermal characterization of post-cured hybrid epoxy nanocomposites reinforced with graphene nanoplatelets and h-boron nitride. Fract Struct Integr 19(71):22–3610.3221/IGF-ESIS.71.03 ↗

48. Wang Y, Zhou Y, Jiang G, Chen P, Chen Z (2020) One-step fabrication of carbonaceous adsorbent from corncob for enhancing adsorption capability of methylene blue removal. Sci Rep 10(1):1251510.1038/s41598-020-68591-1 ↗

49. Wang Y, Si X, Chen J, Ren Z, Zhu X, Lu F (2022) Efficient preparation of cellulose nanofibers in high yield using low concentration of organic acid. Asian J Org Chem 11(9):e20220040710.1002/ajoc.202200407 ↗

50. Zhan W, Fu X, Wang F, Zhang W, Bai G, Xiao W, Yang X (2020) Effect of aromatic amine modified graphene aerogel on the curing kinetics and interfacial interaction of epoxy composites. J Mater Sci 55:10558–1057110.1007/s10853-020-04746-9 ↗