Mechanical properties of glass fiber/organic fiber mixed–mat reinforced thermoplastic composites

Abstract The purpose of this study is to investigate the influence of different types of fibers on the mechanical properties of hybrid composite materials. Long and short glass fibers (GF) and different types of organic fibers, viz. aramid fiber, DuPont Kevlar‐49 (KF), liquid crystalline polymer (LCP), and vinylon (VF) in hybrid composites, were used to reinforced the high density polyethylene (HDPE) matrix. The long fiber hybrid composites were prepared in a “fiber separating and flying machine,” while the short fiber hybrid composites were prepared in an “elastic extruder.” The total amount of fibers used in both long and short fiber hybrid composites was fixed at 20 vol%. The influence of fiber content, length, and mixing ratio on mechanical properties, such as tensile, bending, Izod and high rate impact strength, as well as viscoelastic propertics in the solid state, was studied. Fracture surfaces of the materials were also examined using a scanning electron microscopy.