Thermal, mineralogical, and microstructural characterizations of irradiated polymer blended cement mortar composites
Source abstract
Abstract
In this study, the effects of styrene–acrylic ester (SAE), nanocalcined clay (NCC), and irradiation dose on the thermal, mineralogical, and microstructural characterizations of irradiated polymer‐blended cement mortar composites have been investigated. The composites were prepared by partial replacement of cement with 5 and 10% NCC and mixed with sand, SAE latex was added with different ratios (2, 4, 6, 8, 10, and 15%); the composites were subjected to various doses of γ‐irradiation ranged from 10 to 50 kGy. Physicomechanical properties, thermogravimetric analysis, X‐ray diffractometry, and scanning electron microscopy techniques were carried out. Mechanical investigation manifested that composites loaded with SAE up to 8% showed the best mechanical performance as compared with composites contains 10 and 15% SAE. POLYM. COMPOS., 36:1849–1858, 2015. © 2014 Society of Plastics Engineers
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Chemistry Faculty of Science El‐Menoufia University Cairo Egypt
Department of Radiation Chemistry National Center for Radiation Research and Technology Egyptian Atomic Energy Authority Cairo Egypt
References (31)
Show source-provided references
1. 10.1016/S0950-0618(02)00027-210.1016/S0950-0618(02)00027-2 ↗
2. 10.1007/s10853-006-0645-z10.1007/s10853-006-0645-z ↗
3. Švegl F. · Cem. Concr. Res. · 2008 · 38 · 94510.1016/j.cemconres.2008.02.006 ↗
4. Ohama Y. · ACI Mater. · 1987 · 86 · 511
5. 10.1016/j.jiec.2008.02.00910.1016/j.jiec.2008.02.009 ↗
6. Z.Su Microstructure of Polymer Cement Concrete. Ph.D. Thesis Delft University of Technology (1995).
7. J.A.LarbiandJ.Bijen Proceeding of 6th International Congress Polymers in Concrete International Academic Publishers Beijing 185(1990).
8. 10.1016/j.jiec.2012.09.00310.1016/j.jiec.2012.09.003 ↗
9. 10.1016/S0008-8846(96)00156-110.1016/S0008-8846(96)00156-1 ↗
10. 10.1016/0008-8846(87)90076-710.1016/0008-8846(87)90076-7 ↗
11. 10.1504/IJMPT.2003.00346810.1504/IJMPT.2003.003468 ↗
12. Janotka I. · Constr. Build. Mater. · 2010 · 791 · 802
13. 10.1002/app.1978.07022031810.1002/app.1978.070220318 ↗
14. 10.1016/j.cemconres.2006.05.02010.1016/j.cemconres.2006.05.020 ↗
15. Brostow W. · Polimery · 2009 · 49 · 10
16. 10.1016/j.jpcs.2006.05.01710.1016/j.jpcs.2006.05.017 ↗
17. 10.1016/j.jiec.2013.04.00110.1016/j.jiec.2013.04.001 ↗
18. Yariv S. · 2002
19. 10.1016/j.progpolymsci.2003.08.00210.1016/j.progpolymsci.2003.08.002 ↗
20. 10.1016/S0169-1317(99)00017-410.1016/S0169-1317(99)00017-4 ↗
21. 10.1016/j.msec.2003.09.14810.1016/j.msec.2003.09.148 ↗
22. 10.1007/BF0055304810.1007/BF00553048 ↗
23. 10.1520/CCA10274J10.1520/CCA10274J ↗
24. S.Chandra “Polymer‐Cement Composite: A Critical Review ” inEngineering Foundation Conference New York‐American Society of Civil Engineering July 24–29 (1994).
25. A.Beelclens “Influence of Polymer Types on the Structure of Polymer‐Modified Cement Mortar ” inProceeding of the 21st International Conference on Cement Microscopy Las Vegas USA (1999).
26. 10.1016/S0008-8846(01)00581-610.1016/S0008-8846(01)00581-6 ↗
27. Ohama Y. · 1995
28. 10.1016/S0008-8846(03)00188-110.1016/S0008-8846(03)00188-1 ↗
29. 10.1016/S0008-8846(02)00805-010.1016/S0008-8846(02)00805-0 ↗
30. Souza Almeida A.E.F. · Mater. Res. · 2006 · 9 · 120
31. 10.1016/j.cemconres.2004.06.01510.1016/j.cemconres.2004.06.015 ↗