Effects of sorbed caprolactam on the crystallinity, morphology, and deformation behavior of polyetheretherketone and poly(phenylene sulfide)

Abstract Studies on the high temperature sorption of caprolactam by polymer resins and their composites have been conducted. The systems investigated were glass fiber reinforced (GFR) poly(phenylene sulfide) (PPS), polyetheretherketone (PEEK) neat resin, GFR PEEK and carbon fiber reinforced (CFR) PEEK. To measure changes of caprolactam sorption, melting behavior, mechanical properties, and fracture surface morphology were determined. Absorption of caprolactam by the PEEK composites was 30 to 40 percent less than by the neat resin. This is attributed to the fibers, which acted to constrain the matrix and thus limit its swellability. Reductions in melt temperature, percent crystallinity, ultimate tensile strength, and modulus were observed following exposure to the chemical environment. The loss of strength and stiffness was a consequence of the degradation of the matrix/fiber interface by the sorbed caprolactam.