Multipurpose carbon fiber sensor design for analysis and monitoring of the resin transfer molding of polymer composites

Abstract The resin transfer molding (RTM) process is taking an ever‐growing place among the manufacturing technologies of polymer composite parts because of its numerous advantages. However, consistent production of high‐quality parts is difficult to achieve and requires better understanding of the process and good control of the raw materials. Part‐to‐part variations are inevitable as a result of uncarefully controlled molding environments and unidentifiable or undetected disturbances that cannot be completely eliminated or accounted for. Despite of many efforts to understand and model the fundamental physical and chemical behavior of materials during processing, there is no reliable system able of predicting the optimum processing parameters to manufacture high‐quality parts in a productive way. In this context, this work aims to develop systems allowing the monitoring of the whole RTM process (from preforming to resin curing) and that are reliable, cheap, and easy to use on production line. We have chosen to investigate the potential of the electric and dielectric carbon fiber sensors, which have already proved to be suitable for in service damage monitoring and preventive maintenance without any integration issues. However, the development of the continuous electric sensor has been limited by the polarization of the resin under the direct current. The flow front and the cure monitoring of the resin has been achieved with the dielectric sensor, energized by an alternative current preventing the polarization. Additionally, the ability of this carbon fiber sensor to evaluate the thickness of dry reinforcements and to measure online the actual unsaturated permeability of reinforcements has been demonstrated. POLYM. COMPOS., 26:717–730, 2005. © 2005 Society of Plastics Engineers