Low velocity impact behavior of glass/epoxy cross‐ply laminates with different fiber treatments

Abstract This paper deals with the influence of the fiber/matrix adhesion quality on the impact behavior of cross‐ply glass/epoxy laminates. Glass fibers with two different treatments (one to promote and one to prevent adhesion to the matrix) were embedded in epoxy matrix systems and subjected to low velocity impacts at energies below perforation energy. It will be shown that the laminates with good fiber/matrix adhesion are significantely more damage resistant than the plates with poor adhesion. It will be pointed out that the composites with the more brittle matrix system show the lower damage resistance. For all materials, the absorbed energy correlates well with the amount of impact induced damage. Furthermore, an experimental/mathematical model is introduced that gives the possibility of predicting the maximum deflection and maximum force for any given impact energy. Only one experiment is needed for each material to identify the model parameters. These parameters describe the real material behavior and can be used as characteristic values to classify materials with respect to their impact stiffness and damage resistance.