Pressure window analysis for thin laminated composites in autoclave process

Abstract The curing temperature, pressure, and curing time have significant influence on finished thermosetting composite products. The external pressure and the time of pressure application are two major factors affecting the laminate thickness, fiber volume fraction, and void content. Based on the resin flow/fiber compaction model and corresponding program developed by our group, the genetic algorithm is accepted to design the pressure window for the consolidation of thin laminate. The objective of the optimization is to find the time of pressure application that achieves the desired average fiber volume fraction under given pressure. The pressure windows are analyzed for S‐2 glass fiber/5228 and T700S/5228 laminates with unidirectional and bidirectional lay‐up. It is found that no special viscosity region can be defined as pressure window for many factors affecting the consolidation process. The fiber and lay‐up type largely affect the time of pressure application. For laminates with the same fiber and lay‐up type, the fiber distribution is not much influenced by pressure cycle. The uneven degree of fiber distribution is larger for the fiber bed having higher deformation properties. With the genetic algorithm optimization system, the time of pressure application can be gotten quickly. It is helpful for the improvement of composite parts quality, reduction of the fabrication cost. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers