A fast computational model to the simulation of non‐isothermal mold filling process in resin transfer molding

Abstract The numerical simulation of mass and heat transfer model for the curing stage of the resin transfer molding (RTM) process is known as a useful method to analyze the process before the mold is actually built. Despite the intense interest in the modeling and simulation of this process, the relevant work is currently limited to development of flow models during filling stage. Optimization of non‐isothermal mold filling simulation time without losing the efficiency remains an important challenge in RTM process. These were some reasons that motivate our work; namely the interested on the amelioration of the performance of RTM simulation code in term of execution time and memory space occupation. Our approach is accomplished in two steps; first by the modification of the control volume/ finite element method (CV/FEM) and second by the implementation in the modified code of an adapted conjugate gradient algorithm to the compressed sparse row storage scheme. The validity of our approach is evaluated with analytical results and excellent agreement was found. The results show that our optimization strategy leads to maximum reduction in time and space memory. This allows one to deal with problems with great and complex dimensions mostly encountered in RTM application field, without interesting in the constraint of space or time. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers