Investigating the effect of GO ‐ ZnO nano‐hybrid on the mechanical, rheological, and degradation performance of poly (butylene succinate)

Abstract This paper reports on preparing two types of graphene oxide‐zinc oxide (GO‐ZnO) nano‐hybrids and their effect on the performance of polybutylene succinate (PBS) matrix. This view synthesized GO, ZnO, and GO‐ZnO nano‐hybrids at 1:1 and 1:2 weight ratios. Subsequently, various spectroscopy and microscopy analyses (FTIR, UV, Raman, AFM, and TEM) were employed to characterize the structure of synthesized nanomaterials. The obtained results revealed that the hybridization was successfully occurred and microstructure of two types of prepared nano‐hybrids are basically different depending on the preparation procedure. Following this, PBS nanocomposites with 0.5, 1, and 1.5 wt% of GO‐ZnO nano‐hybrids (NPs) were produced via the solvent‐blending method. The mechanical, microstructural, rheological, biodegradability and UV‐shielding properties of the fabricated films were then investigated. Mechanical properties showed that addition of 0.5 wt% ZnO‐GO nanohybrids improved elongation at break from 21.6% to 28.7% and increased tensile strength by 20%. However, rheological assessments showed a one‐order‐of‐magnitude decrease in viscosity with the addition of only 0.5 wt%. In degradation analysis, 100 percent of mass loss was observed during 5 weeks for PBS with 1.5 wt% of GO‐ZnO. PBS/GO‐ZnO nanocomposites indicated tailored mechanical properties, biodegradability, suggesting a promising potential in packaging applications. Highlights GO‐ZnO nanohybrids were successfully synthesized. Incorporating GO‐ZnO into PBS improved its hydrolytic degradation The thermal decomposition of PBS was accelerated by the addition of GO‐ZnO. Adding GO‐ZnO nanohybrids to PBS resulted in a drop in viscosity. Nanohybrids with higher ZnO content exhibited greater hydrolytic and thermal degradation.