journal article·2024-03-10

Effect of ultraviolet radiation on the low‐velocity impact and compression after impact performances of aerospace composite laminates

Songjing Liu, Zhe Li, Yu Feng, Teng Zhang, Binlin Ma, Wenqian Wang

Polymer Composites· Volume 45· Issue 4
Publisher page

Abstract

Abstract The low‐velocity impact (LVI) characteristics and compression after impact (CAI) properties of aircraft composite laminates under the influence of ultraviolet (UV) radiation were studied. Firstly, 0, 30, 60, 90 days of UV radiation experiments were carried out on the specimens to analyze the characteristics of the surface topography. Secondly, LVI experiments, the impact energies of 10, 17, and 25 J, were carried out on specimens to analyze the impact response laws and the characteristics of the impact instantaneous deformation. Finally, through CAI experiments and scanning electron microscope (SEM) techniques to clarify the influence mechanism of UV radiation on the residual compressive strength of specimens. The results showed that with the increase of UV radiation time, the shrinkage and erosion phenomena of the surface matrix and the exposure degree of the surface fibers were gradually increased, and the surface fibers were completely exposed after 90 days of radiation. At the same impact energy, with longer radiation time, the peak force gradually decreased (from 8673.86 to 7851.68 N at 17 J), the absorbed impact energy (from 9.48 to 11.13 J at 17 J) and maximum displacement (from 4.1 to 4.73 mm at 17 J) increased, the depth of pit on the impact surface decreased (from 0.213 to 0.14 mm at 17 J), and the internal damage projection area increased (from 906.68 to 1158.66 mm2 at 17 J). The compression damage of the specimens not exposed to/ exposed to UV radiation was mainly fiber cracking/interlayer delamination, respectively. Highlights Ultraviolet (UV) radiation makes the matrix of surface shrink, the fibers exposure increase. The Stage II has obvious oscillation phenomenon in four stages of the low‐velocity impact process. With prolonged UV radiation, the projected area of internal damage expands. The residual compressive load increases with the increase of UV radiation time.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · High-Velocity Impact and Material Behavior · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Aviation Engineering School Air Force Engineering University Xi'an China

School of Aeronautics Northwestern Polytechnical University Xi'an China

Funding

National Natural Science Foundation of China

References (32)

Show source-provided references
1. 10.1016/j.compstruct.2019.11100710.1016/j.compstruct.2019.111007 ↗
2. 10.16338/j.issn.1009‐1319.2012.01.00710.16338/j.issn.1009‐1319.2012.01.007 ↗
3. 10.11868/j.issn.1001‐4381.2015.05.01510.11868/j.issn.1001‐4381.2015.05.015 ↗
4. 10.1016/j.polymdegradstab.2020.10935210.1016/j.polymdegradstab.2020.109352 ↗
5. 10.1177/073168441561092010.1177/0731684415610920 ↗
6. 10.3390/ma1002018010.3390/ma10020180 ↗
7. 10.1016/j.tws.2022.10992110.1016/j.tws.2022.109921 ↗
8. 10.1016/j.tws.2020.10715710.1016/j.tws.2020.107157 ↗
9. 10.1007/s12046‐023‐02090‐710.1007/s12046‐023‐02090‐7 ↗
10. 10.1007/s13726‐019‐00690‐x10.1007/s13726‐019‐00690‐x ↗
11. 10.7527/S1000‐6893.2021.2532310.7527/S1000‐6893.2021.25323 ↗
12. 10.3969/j.issn.1005‐5053.2011.6.01410.3969/j.issn.1005‐5053.2011.6.014 ↗
13. 10.13700/j.bh.1001‐5965.2021.015410.13700/j.bh.1001‐5965.2021.0154 ↗
14. 10.1016/j.compstruct.2020.11351910.1016/j.compstruct.2020.113519 ↗
15. 10.1177/002199831985642610.1177/0021998319856426 ↗
16. 10.1016/j.tws.2021.10822010.1016/j.tws.2021.108220 ↗
17. 10.1016/j.compstruct.2022.11609010.1016/j.compstruct.2022.116090 ↗
18. 10.1016/j.compstruct.2022.11615210.1016/j.compstruct.2022.116152 ↗
19. 10.1016/j.compstruct.2021.11395810.1016/j.compstruct.2021.113958 ↗
20. 10.1016/j.compositesb.2022.10985010.1016/j.compositesb.2022.109850 ↗
21. 10.1016/j.paerosci.2015.11.00210.1016/j.paerosci.2015.11.002 ↗
22. 10.1016/j.prostr.2020.12.01210.1016/j.prostr.2020.12.012 ↗
23. 10.1016/j.polymdegradstab.2018.06.00410.1016/j.polymdegradstab.2018.06.004 ↗
24. 10.1016/j.matpr.2023.03.27210.1016/j.matpr.2023.03.272 ↗
25. 10.1016/j.compositesb.2020.10792310.1016/j.compositesb.2020.107923 ↗
26. 10.13801/j.cnki.fhclxb.2013.02.03310.13801/j.cnki.fhclxb.2013.02.033 ↗
27. Guojian W · 2018
28. UV aging properties of PLA/jute laminated composites
29. ASTM · 2023
30. ASTM · 2012
31. 10.11951/j.issn.1005‐0299.2017008610.11951/j.issn.1005‐0299.20170086 ↗
32. 10.1177/002199831558083510.1177/0021998315580835 ↗