Mechanical properties and nonisothermal crystallization of polyamide 6/carbon fiber composites toughened by maleated elastomers

Polyamide 6/carbon fiber (PA6/CF) composites toughened with maleated elastomers were prepared by melt blending using twin‐screw extruder followed by injection molding. Three kinds of maleated elastomers, maleic anhydride (MAH)‐grafted ethylene‐vinyl acetate copolymer (EVA‐g‐MAH), MAH‐grafted ethylene‐propylene‐diene terpolymer (EPDM‐g‐MAH), and MAH‐grafted hydrogenated styrene‐butadiene‐styrene (SEBS‐g‐MAH), were used to toughen the PA6/CF composites. The mechanical properties, morphology, nonisothermal crystallization, and subsequent melting behavior of PA6 hybrid composites were investigated. Mechanical tests indicated that incorporation of elastomers improved the impact properties of CF‐reinforced PA composites accompanied with loss of tensile strength and modulus. It was observed from scanning electron microscope photographs that modification with maleated elastomers improved the interfacial adhesion between the CFs and PA6 matrix. Nonisothermal crystallization behavior showed that three kinds of elastomers had negative effect on crystallization and retarded crystallization of PA6. Kissinger's analysis illustrated that addition of CF slightly increased the crystallization activation energy of PA6, whereas incorporation of elastomers reversed it compared with pure PA6. Furthermore, a slight decrease in crystallinity and melting peak of the composites after incorporation of elastomers was observed compared with pure PA6. Polarizing optical microscope results showed that the transcrystallinity phenomenon seemed to be also affected when the matrix was added by the elastomers. POLYM. COMPOS., 35:2170–2179, 2014. © 2014 Society of Plastics Engineers