Isothermal crystallization and melting behaviors of nano TiO₂‐modified polypropylene/polyamide 6 blends

Abstract Titanium dioxide (TiO₂) nanoparticles were functionalized with toluene‐2,4‐diisocyanate and then polypropylene/polyamide 6/(PP/PA6) blends containing functionalized‐TiO₂ were prepared using a twin screw extruder. Isothermal crystallization and melting behavior of the as‐prepared composites were investigated using differential scanning calorimetry and wide‐angle X‐ray diffraction. Isothermal crystallization analysis shows that the TiO₂ nanoparticles have two effects on PP/PA6 blends, i.e., it can favor the improvement of crystallization ability and decrease the crystallization rate of PP/PA6 blends. The improvement of crystallization ability is superior over decreasement of crystallization rate of PA6 chains caused by TiO₂, therefore PA6 in PP/PA6/TiO₂ nanocomposites have higher crystallization rate than that of PA6 in pure PP/PA6 blends, which indicated TiO₂ nanoparticles favored the crystallization of PA6. The TiO₂ nanoparticles show no effects on the equilibrium melting temperature (T) values of PP phase but decreases the T values of PA6 phase. In addition, the TiO₂ nanoparticles did not change the crystalline polymorph of PP/PA6 blends basically; however, favored the formation of β‐PP. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers