Using supercritical carbon dioxide in preparing carbon nanotube nanocomposite: Improved dispersion and mechanical properties

Abstract Improvements in carbon nanotube (CNT) dispersion and subsequent mechanical properties of CNT/poly(phenylsulfone) (PPSF) composites were obtained by applying the supercritical CO₂ (scCO₂)‐aided melt‐blending technique that has been used in our laboratory for nanoclay/polymer composite preparation. The preparation process relied on rapid expansion of the CNTs followed by melt blending using a single‐screw extruder. Scanning electronic microscopy results revealed that the CNTs exposed to scCO₂ at certain pressures, temperatures, exposure time, and depressurization rates have a more dispersed structure. Microscopy results showed improved CNT dispersion in the polymer matrix and more uniform networks formed with the use of scCO₂, which indicated that CO₂‐expanded CNTs are easier to disperse into the polymer matrix during the blending procedure. The CNT/PPSF composites prepared with scCO₂‐aided melt blending and conventional melt blending showed similar tensile strength and elongation at break. The Young's modulus of the composite prepared by means of conventional direct melt blending failed to increase beyond the addition of 1 wt% CNT, but the scCO₂‐aided melt‐blending method provided continuous improvements in Young's modulus up to the addition of 7 wt% CNT. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers