Effects of conductive graphite filler loading on physical properties of high‐density polyethylene composite
Source abstract
Abstract
Abstract High‐density polyethylene (HDPE)/graphite nanocomposites containing up to 30 vol% of graphite powder filler were prepared by melt mixing in a Brabender Plasticorder at 180°C for 15 min. The nanocomposites were characterized for their rheological, dynamic mechanical, crystallographic, and electrical properties as a function of graphite loading. The results indicated that graphite loading affects storage modulus, loss modulus, complex viscosity, and conductivity of HDPE matrix. The storage modulus increases while the graphite loading increases in the studied concentration range (up to 30%). When the graphite loading was increased to 30%, storage modulus at room temperature was about 300% higher than that of pure HDPE. Also, the composites containing 20 and 30% graphite shows more conductivity than the others. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer crystallization and properties · Carbon Nanotubes in Composites · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. 10.1016/j.polymer.2010.09.00710.1016/j.polymer.2010.09.007 ↗
2. 10.1002/pc.1051710.1002/pc.10517 ↗
3. 10.1002/pc.1017410.1002/pc.10174 ↗
4. 10.1016/S0379-6779(99)00258-110.1016/S0379-6779(99)00258-1 ↗
5. 10.1016/j.compscitech.2006.12.00910.1016/j.compscitech.2006.12.009 ↗
6. 10.1016/j.compscitech.2005.12.01310.1016/j.compscitech.2005.12.013 ↗
7. 10.1023/A:100466422501510.1023/A:1004664225015 ↗
8. 10.1016/0010-4361(93)90041-610.1016/0010-4361(93)90041-6 ↗
9. 10.1016/j.eurpolymj.2003.08.00510.1016/j.eurpolymj.2003.08.005 ↗
10. 10.1016/j.compositesa.2009.05.00210.1016/j.compositesa.2009.05.002 ↗
11. 10.1016/S0032-3861(03)00050-810.1016/S0032-3861(03)00050-8 ↗
12. 10.1002/app.2560710.1002/app.25607 ↗
13. 10.1002/(SICI)1099-0488(20000615)38:12<1626::AID-POLB80>3.0.CO;2-R10.1002/(SICI)1099-0488(20000615)38:12<1626::AID-POLB80>3.0.CO;2-R ↗
14. 10.1016/j.polymer.2009.05.03810.1016/j.polymer.2009.05.038 ↗
15. 10.1002/app.3169210.1002/app.31692 ↗
16. 10.1016/j.eurpolymj.2005.11.02610.1016/j.eurpolymj.2005.11.026 ↗
17. 10.1002/polb.2054310.1002/polb.20543 ↗
18. 10.1016/j.jpowsour.2006.08.01910.1016/j.jpowsour.2006.08.019 ↗
19. 10.1021/ma051357w10.1021/ma051357w ↗
20. Wu Q. · J. Plast. Technol. · 2007 · 27 · 108
21. 10.1007/s10853-005-2885-810.1007/s10853-005-2885-8 ↗
22. 10.1016/j.polymer.2006.02.01710.1016/j.polymer.2006.02.017 ↗
23. 10.1016/S0032-3861(02)00151-910.1016/S0032-3861(02)00151-9 ↗
24. 10.1002/pen.76030140710.1002/pen.760301407 ↗
25. 10.1021/ma000565f10.1021/ma000565f ↗
26. Ferry J.D. · 1980
27. 10.1016/j.compscitech.2008.10.00510.1016/j.compscitech.2008.10.005 ↗
28. 10.1016/j.polymer.2005.06.09410.1016/j.polymer.2005.06.094 ↗
29. 10.1002/pc.2078810.1002/pc.20788 ↗
30. 10.1016/j.scriptamat.2007.05.03510.1016/j.scriptamat.2007.05.035 ↗
31. 10.1002/978047042383710.1002/9780470423837 ↗
32. 10.1016/j.compositesb.2006.04.00310.1016/j.compositesb.2006.04.003 ↗
33. 10.1002/app.2904210.1002/app.29042 ↗