Thermal, mechanical, and morphological investigation of injection molded poly(trimethylene terephthalate)/carbon fiber composites

Abstract Injection molded poly(trimethylene terephthalate) (PTT)/carbon fiber (CF) composites have been fabricated using a twin screw micro compounder. The effect of CF reinforcement on the thermal, mechanical, dynamic mechanical, and microscopic properties of the composite was investigated. Addition of 30 wt% of CF into PTT resulted in the significant enhancement of tensile (120%) and flexural (30%) strength compared to neat PTT. The rule of mixture was successfully employed for theoretical calculations of tensile modulus and the calculated values were compared with the experimental results. Similarly, CF reinforced (30 wt%) PTT composites exhibited an increase of more than a 150°C in the heat deflection temperature. Scanning electron microscopy analysis of the tensile fracture specimens revealed uniform distribution of the CFs with good polymer matrix and fiber adhesion. Overall, the results obtained indicate the enhancement of properties with increasing fiber content, confirming better fiber and polymer matrix compatibility. POLYM. COMPOS., 33:1933–1940, 2012. © 2012 Society of Plastics Engineers