Effect of maleated polypropylene and impact modifiers on the morphology and mechanical properties of PP/Mica composites

Abstract Composites of polypropylene (PP) with mica powder and impact modifiers were produced by internal mixer. A major drawback in the use of mica‐filled PP is its low impact resistance. In the present study, the effect of the maleated PP (MAPP) and impact modifiers was evaluated on the composite properties separately and together. Thus, two different styrene‐ethylene/butylene‐styrene triblock copolymers (SEBS) and one ethylene‐propylene‐diene terpolymer (EPDM) have been used as impact modifiers in the PP‐mica composites. Addition of MAPP had a negative effect on the composite notched impact strength and elongation at break but had a positive effect on tensile strength when used together with impact modifiers. All three elastomers increased the impact strength of the PP‐mica composites but the addition of maleated SEBS (SEBS‐MA) granted the greatest improvement in impact strength. It was inferred from the scanning electron microscopy that SEBS‐MA had a stronger interaction with mica surface than the other impact modifiers. POLYM. COMPOS., 27:614–620, 2006. © 2006 Society of Plastics Engineers