A comparative study of vacuum‐assisted resin transfer molding (VARTM) for sandwich panels

Abstract Vacuum‐assisted resin transfer molding (VARTM) of sandwich panels can be facilitated by using high permeability layers (HPL) over the skins or adding channels in the surfaces of the core (CIC). The present paper investigates the advantages and disadvantages of both methods in terms of manufacturing cost and time through simulations and experimental observations. A cost model is developed, and the resin infusion time for each method was minimized through simulations. The design parameters are the number of high‐permeability layers and the number and size of channels. A penalty function with equal weight on cost and time is used to find the optimum values of the design parameters. Under the conditions studied, the optimal HPL method is found to be better than the optimal CIC method. While the conclusion is limited to the present study, the proposed approach can be used to optimize manufacturing processes for larger sandwich panels under different conditions.