Ferroelectric and Fatigue Studies on PZT Films Produced by Oxide Precursors
Source abstract
Abstract
Ferroelectric PZT thin films were prepared by a method that uses oxides as precursors. Films with 0.5 μm in thickness were deposited on Pt/Si. In these films the presence of the tetragonal and rhombohedral phases was identified. Grain size of films was in the range 0.07 to 0.12 μm, in average. Capacitance–voltage (C–V) characteristics and P–E hysteresis loops were used to confirm ferroelectricity. The obtained remanent polarization (Pr) and coercive field (Ec) values were 6.2 μC/cm2 and 66 kV/cm, respectively, at 100 Hz frequency. Finally, as a result of fatigue process, the Pr value decreased to 79% of its initial value after 2.6 × 107 switching cycles.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Acoustic Wave Resonator Technologies · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.