Suicide Formation Resulting from the Interfacial Reaction of Silicon and Thin Films of Ir–V Alloys and Bilayers
Source abstract
Abstract
Silicide formation resulting from the interfacial reaction of a Si substrate and thin films of codeposited IrxV100−x (x = 25; 50; 80) alloys and bilayers of Ir/V and V/Ir are studied. The interdiffusion and compound formation are analyzed by Auger electron spectroscopy, Rutherford backscattering, and X-ray diffraction. The Schottky barrier height of these contacts to n-type Si is determined by forward current–voltage measurements. Effects of alloy composition and heat treatment on the temperature of silicide formation, reaction product, and component redistribution are investigated and correlated with the electrical properties of the metal–semiconductor interface. It is found that the formation temperatures of silicides for the alloys are higher than for the bilayers, probably due to formation of Ir–V intermetallic compounds. Silicide formation involves a large scale component redistribution, the details of which depend on alloy composition, but always iridium accumulation at the Si substrate interface is observed. The apparent Schottky barrier height changes significantly with heat treatment promising a way to tailor this property by a suitable choice of alloy composition and heat treatment. Es wird die Silizidbildung von Grenzflächenreaktionen von einem Si-Substrat und dünnen Schichten von gleichzeitig aufgebrachten IrxV100−x (x = 25, 50, 80)-Legierungen und Doppelschichten von Ir/V und V/Ir untersucht. Die Interdiffusion und Verbindungsbildung wird mittels Auger-elektronenspektroskopie, Rutherfordrückstreuung und Röntgenbeugung analysiert. Die Höhe der Schottky-Barriere dieser Kontakte auf n-leitendem Si wird durch Messung der Durchlaßcharakteristik bestimmt. Die Einflüsse der Legierungszusammensetzung und der Wärmebehandlung auf die Temperatur der Silizidbildung, auf das Reaktionsprodukt und die Komponentenumverteilung werden untersucht und mit den elektrischen Eigenschaften der Metall–Halbleiter-Grenzfläche verknüpft. Es wird gefunden, daß die Bildungstemperatur der Silizide für die Legierungen höher als für die Doppelschichten sind, wahrscheinlich aufgrund der Bildung von intermetallischen Ir–V-Verbindungen. Die Silizidbildung schließt eine große Komponentenumverteilung ein, deren Einzelheiten von der Legierungszusammensetzung abhängt, jedoch wird stets eine Iridiumanhäufung an der Si-Substratgrenzfläche beobachtet. Die auftretende Schottky-Barrierenhöhe ändert sich wesentlich mit der Wärmebehandlung und zeigt damit einen Weg zur Einstellung dieses Wertes durch eine geeignete Wahl der Legierungszusammensetzung und Wärmebehandlung.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Semiconductor materials and interfaces · Intermetallics and Advanced Alloy Properties · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.