Controlled Thermal Imidization of Thermoplastic Polyimide for Temporary Bonding and Debonding in Advanced Packages
Source abstract
Abstract
Temporary bonding and debonding (TBDB) is a key technology in the semiconductor field to enable 2.5D/3D integration of devices. However, the conventional polyimides, which serve as the laser-response material in TBDB, exhibit extremely poor solubility in aprotic polar solvents due to high-temperature imidization, limiting the cleaning process for wafers after debonding. Herein, a feasible method of controlling the curing temperature to enhance the solubility of thermoplastic polyimide (TPI) has been developed. The results proved that the ultimate solubility of TPI cured at 200 °C (TPI-200 °C) could be as high as 28.4 wt %. Besides, TPI-200 °C exhibits excellent heat resistance, outstanding mechanical properties, and ultrahigh absorptivity (99.96%) at a 355 nm UV wavelength. Meanwhile, we demonstrate the feasibility of the as-prepared TPI material for application in the TBDB process, showing excellent efficiency and low cost, and the follow-up elemental analysis of the cleaned wafer surfaces proved that TPI-200 °C can be completely removed after debonding. All these results demonstrate that TPI materials that can be used for TBDB are promising for ultrathin chip packaging and wafer level packaging (WLP) in the field of advanced electronic packaging.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Synthesis and properties of polymers · 3D IC and TSV technologies · Epoxy Resin Curing Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Shenzhen Institute of Advanced Electronic Materials, Shenzhen Institutes of Advanced Technology, Chinese Academy of Sciences, Shenzhen518055, China
Department of Nano Science and Technology Institute, University of Science and Technology of China, Suzhou215123, China
Funding
Guangdong Science and Technology Department · Youth Innovation Promotion Association of the Chinese Academy of Sciences · National Natural Science Foundation of China · Guangdong Jointed Funding
References (54)
Show source-provided references
1. 10.1109/TII.2016.251864310.1109/TII.2016.2518643 ↗
2. 10.1039/C6TA02851A10.1039/C6TA02851A ↗
3. 10.1039/C5NR07091K10.1039/C5NR07091K ↗
4. 10.1109/TII.2016.251848410.1109/TII.2016.2518484 ↗
5. 10.1063/1.490392410.1063/1.4903924 ↗
6. 10.1109/TII.2015.241335310.1109/TII.2015.2413353 ↗
7. 10.1109/TPEL.2013.228833410.1109/TPEL.2013.2288334 ↗
8. 10.1109/TEPM.2008.201077610.1109/TEPM.2008.2010776 ↗
9. 10.1002/aelm.20210102910.1002/aelm.202101029 ↗
10. 10.1016/j.polymer.2022.12466010.1016/j.polymer.2022.124660 ↗
11. Jourdain, A.; Buisson, T.; Phommahaxay, A.; Redolfi, A.; Thangaraju, S.; Travaly, Y.; Beyne, E.; Swinnen, B.Integration of TSVs, wafer thinning and backside passivation on full 300mm CMOS wafers for 3D applications. In 2011 IEEE 61st Electronic Components and Technology Conference (ECTC), May 31–June 3, 2011; pp 1122–1125.10.1109/ECTC.2011.5898650 ↗
12. Sharpe, J. A.; Jordan, M. B.; Burkett, S. L.; Barkey, M. E.Analyzing the behavior and shear strength of common adhesives used in temporary wafer bonding. In 2013 IEEE 63rd Electronic Components and Technology Conference, May 28–31, 2013; pp 94–100.10.1109/ECTC.2013.6575556 ↗
13. Hermanowski, J.Thin wafer handling ─ Study of temporary wafer bonding materials and processes. In 2009 IEEE International Conference on 3D System Integration, Sept. 28–30, 2009; pp 1–5.10.1109/3DIC.2009.5306550 ↗
14. Wuensch, D.; Purwin, L.; Buttner, L.; Martinka, R.; Schubert, I.; Junghans, R.; Baum, M.; Wiemer, M.; Otto, T.Temporary wafer bonding - key technology for MEMS devices. In 2017 Pan-Pacific Microelectronics Symposium (Pan Pacific), 2017; pp 1–7.
15. Smith A. · 2007 · 29
16. 10.1039/C2CC35694E10.1039/C2CC35694E ↗
17. 10.1063/1.351714510.1063/1.3517145 ↗
18. 10.1007/s10544-007-9059-110.1007/s10544-007-9059-1 ↗
19. 10.1116/1.185246710.1116/1.1852467 ↗
20. 10.1109/TCPMT.2018.287176410.1109/TCPMT.2018.2871764 ↗
21. 10.1016/j.ijadhadh.2014.09.00210.1016/j.ijadhadh.2014.09.002 ↗
22. Zoschke, K.; Fischer, T.; Töpper, M.; Fritzsch, T.; Ehrmann, O.; Itabashi, T.; Zussman, M. P.; Souter, M.; Oppermann, H.; Lang, K. D.Polyimide based temporary wafer bonding technology for high temperature compliant TSV backside processing and thin device handling. In 2012 IEEE 62nd Electronic Components and Technology Conference, May 29–June 1, 2012; pp 1054–1061.10.1109/ECTC.2012.6248966 ↗
23. 10.1109/ECTC.2012.624910910.1109/ECTC.2012.6249109 ↗
24. 10.1109/ECTC32862.2020.0002410.1109/ECTC32862.2020.00024 ↗
25. 10.1016/j.carbon.2017.12.02310.1016/j.carbon.2017.12.023 ↗
26. 10.1063/1.156965710.1063/1.1569657 ↗
27. 10.1016/j.compositesb.2021.10941210.1016/j.compositesb.2021.109412 ↗
28. 10.1016/j.jechem.2020.09.04310.1016/j.jechem.2020.09.043 ↗
29. 10.1002/adma.20180773810.1002/adma.201807738 ↗
30. 10.1016/j.mser.2006.01.00110.1016/j.mser.2006.01.001 ↗
31. 10.1016/j.progpolymsci.2012.02.00510.1016/j.progpolymsci.2012.02.005 ↗
32. 10.1038/nature1231410.1038/nature12314 ↗
33. 10.1016/j.progpolymsci.2019.01.00410.1016/j.progpolymsci.2019.01.004 ↗
34. 10.3144/expresspolymlett.2020.6210.3144/expresspolymlett.2020.62 ↗
35. 10.1016/0032-3861(96)82914-410.1016/0032-3861(96)82914-4 ↗
36. 10.1016/j.polymer.2021.12396310.1016/j.polymer.2021.123963 ↗
37. 10.1039/C5TC02432C10.1039/C5TC02432C ↗
38. 10.1021/ma500707310.1021/ma5007073 ↗
39. 10.1039/C4TC02854F10.1039/C4TC02854F ↗
40. 10.1016/j.polymer.2015.08.05410.1016/j.polymer.2015.08.054 ↗
41. 10.1002/anie.20211005710.1002/anie.202110057 ↗
42. 10.1002/app.1986.07031011010.1002/app.1986.070310110 ↗
43. 10.1038/pj.2012.22210.1038/pj.2012.222 ↗
44. 10.1016/j.catcom.2016.03.01910.1016/j.catcom.2016.03.019 ↗
45. 10.1016/j.ijheatmasstransfer.2019.11889610.1016/j.ijheatmasstransfer.2019.118896 ↗
46. 10.1016/S0924-0136(00)00467-210.1016/S0924-0136(00)00467-2 ↗
47. 10.1109/TCPMT.2016.264220810.1109/TCPMT.2016.2642208 ↗
48. 10.4071/imaps.26010.4071/imaps.260 ↗
49. Hladik, M.; Bhatia, P.Improvements in Thin Wafer Handling-Equipment and Material Impacts. In CS MANTECH Conference, May 19–22, 2014; pp 287–290.
50. John, R. S. E.; Meynen, H.; Wang, S.; Fu, P.F.; Yeakle, C.; Kim, S. W. W.; Larson, L. J.; Sullivan, S.Low Cost, Room Temperature Debondable Spin-on Temporary Bonding Solution: A Key Enabler for 2.5D/3D IC Packaging. In IEEE 63rd Electronic Components and Technology Conference (ECTC), Las Vegas, NV, May 28–31, 2013; pp 107–112.10.1109/ECTC.2013.6575558 ↗
51. 10.4071/2012DPC-WA1510.4071/2012DPC-WA15 ↗
52. Furuya, M. Temporary adhesive composition, and method of producing thin wafer. Patents EP2392629-A1; EP2392629-B1; JP5545600-B2; KR101726004-B1; KR20110133440-A; TW201211186-A; TW1477572-B; US8742009-B2; 2011297300-A1.
53. Jourdain, A.; Phommahaxay, A.; Verbinnen, G.; Murdoch, G.; Miller, A.; Rebibis, K.; Guerrero, A.; McCutcheon, J.; Privett, M.; Neidrich, J.; Beyer, G.; Beyne, E.Integration and manufacturing aspects of moving from WaferBOND HT-10.10 to ZoneBOND material in temporary wafer bonding and debonding for 3D applications. In 2013 IEEE 63rd Electronic Components and Technology Conference, May 28–31, 2013; pp 113–117.10.1109/ECTC.2013.6575559 ↗
54. 10.1109/TCPMT.2016.264220810.1109/TCPMT.2016.2642208 ↗