Reduce the hysteresis effect with the PEIE interface dipole effect in the organic-inorganic hybrid perovskite CH3NH3PbI3-xClx solar cell
Source abstract
Abstract
Abstract Power conversion efficiency (PCE) of CH3NH3PbI3 perovskite solar cells has been developed rapidly, it reached the 22.1%. However, the anomalous hysteresis found in I-V measurements can cause an inaccurate estimation of the efficiency. In this article, we fabricated the ITO/PEDOT:PSS/CH3NH3PbI3-xClx/ PCBM/PEIE/Al structure perovskite solar cell, we inserted an interface layer of Polyethylenimine ethoxylated (PEIE) into solar cell device between the PCBM and aluminum (Al) electrode, the electrical filed induce photoluminescence (PL) quenching experiment and capacitance-voltage characteristic both demonstrate that the PEIE layer exists an interface dipole effect in the perovskite solar cell device, it can effectively reduce the hysteresis effect in the I-V measurement, and greatly increase the solar cell's efficiency from the 10.93%–14.46%. Utilizing the photoinduction dielectric response technology, we further found that the interface dipole effect increased the built-in electrical field, and enhanced the charge carrier transport properties, consequently, increased the short-circuit current (Jsc). On the other hand, the interface dipole effect decreased the concentration of defect on the CH3NH3PbI3-xClx surface, and made the charge injection barrier to increasing at the electrode and perovskite interface, leading to enhance the open-circuit voltage (Voc). In addition, the diminution of defect could further increase more effective electron transport channels, leading to the more charge carriers transport toward to the corresponding electrode, and increased the solar cell's Fill Factor (FF). Therefore, the addition PEIE interface layer in the perovskite solar cell not only can remove the hysteresis effect but also develop the high PCE perovskite solar cell. We hope the interface dipole effect as an effective methods can greatly promote and develop high efficiency and stable perovskite solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Electronics and Photovoltaics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
2. Anomalous hysteresis in perovskite solar cells10.1021/jz500113x ↗
3. Hysteresis analysis based on the ferroelectric effect in hybrid perovskite solar cells10.1021/jz502111u ↗
4. Enhanced photovoltaic performance and reduced hysteresis in perovskite-IC BA-based solar cells10.1016/j.orgel.2018.03.042 ↗
5. Eliminating J-V hysteresis in perovskite solar cells via defect controlling10.1016/j.orgel.2018.04.017 ↗
6. Impact of PCBM/C60 electron transfer layer on charge transports on ordered and disordered perovskite phases and hysteresis-free perovskite solar cells10.1016/j.orgel.2018.02.010 ↗
7. Performance improvement of perovskite solar cells by employing a CdSe quantum dot/PCBM composite as an electron transport layer10.1039/C7TA00203C ↗
8. Compact layer influence on hysteresis effect in organic–inorganic hybrid perovskite solar cells10.1016/j.elecom.2016.04.013 ↗
9. Large fill-factor bilayer iodine perovskite solar cells fabricated by a low-temperature solution-process10.1039/C4EE00233D ↗
10. Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells10.1038/ncomms6784 ↗
11. Parameters affecting I–V hysteresis of CH3NH3PbI3 perovskite solar cells: effects of perovskite crystal size and mesoporous TiO2 layer10.1021/jz501392m ↗
12. Ionic polarization-induced current–voltage hysteresis in CH3NH3PbX3 perovskite solar cells10.1038/ncomms10334 ↗
13. Perovskite solar cells employing organic charge-transport layers10.1038/nphoton.2013.341 ↗
14. Nickel oxide electrode interlayer in CH3NH3PbI3 perovskite/PCBM planar-heterojunction hybrid solar cells10.1002/adma.201306217 ↗
15. Hysteresis-free multi-walled carbon nanotube-based perovskite solar cells with a high fill factor10.1039/C5TA07714A ↗
16. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
17. Effect of LiF/metal electrodes on the performance of plastic solar cells10.1063/1.1446988 ↗
18. Tuning of a graphene-electrode work function to enhance the efficiency of organic bulk heterojunction photovoltaic cells with an inverted structure10.1063/1.3514551 ↗
19. Highly stable and efficient inverted organic solar cells based on low-temperature solution-processed PEIE and ZnO bilayers10.1039/C6TA00957C ↗
20. Fabricate organic thermoelectric modules use modified PCBM and PEDOT: PSS materials10.1007/s12200-017-0712-x ↗
21. High sensitivity and fast response solution processed polymer photodetectors with polyethylenimine ethoxylated (PEIE) modified ITO electrode10.1364/OE.25.007719 ↗
22. Ultraviolet photoelectron spectroscopy of semiconductor clusters: silicon and germanium10.1016/0009-2614(87)80353-6 ↗
23. X-ray photoelectron spectroscopy10.1021/ar50030a003 ↗
24. Nonnenmacher · Appl. Phys. Lett. · 1991 · 58 · 292110.1063/1.105227 ↗
25. Characterization of nanostructured hybrid and organic solar cells by impedance spectroscopy10.1039/c0cp02249g ↗