Tuning photovoltaic parameters in polymer solar cells through side-chain modification of donor polymer based on cyclopenta[c]thiophene-4,6(5H)-dione
Source abstract
Abstract
Conjugated polymers were developed by using thiophene-dione derivatives named DEHOB-BDTF and DBOOB-BDTF. The polymers have a combination of electron donor (D) and electron acceptor (A), in which 5-(3,4-bis(((2-ethylhexyl)oxy)benzylidene)-1,3-dibromo-4H-cyclopenta[ c ]thiophene-4,6(5H)-dione (DEHOB) or 5-(3,4-bis((2-butyloctyl)oxy)benzylidene)-1,3-dibromo-4H-cyclopenta[ c ]thiophene-4,6(5H)-dione (DBOOB) serves as the electron acceptor units. The alkoxy chain shows strong electron-donating properties due to conjugation effects while longer alkoxy chain increases the solubility. Non-fullerene PSCs are fabricated with an ITO/ZnO/polymer: Y6BO/MoO 3 /Ag structure in which Y6BO is used as an electron acceptor. The performance of the device by using DEHOB-BDTF is accomplished up to 8.49 % (an open-circuit voltage of 0.85 V and a short-circuit current density of 20.1 mA/cm 2 ). Furthermore, the longer alkoxy chain length enhances solubility making a well-ordering in DBOOB and reaching the fill factor of 54.2 %, due to the extended alkoxy chain can improve the miscibility in the blend.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (78)
Show source-provided references
1. A thiophene based Dopant-free hole-transport polymer for efficient and stable perovskite solar cells10.1007/s13233-022-0042-8 ↗
2. A low cost and high performance polymer donor material for polymer solar cells
3. Efficient organic solar cell with 16.88% efficiency Enabled by refined acceptor crystallization and morphology with improved charge transfer and transport properties
4. Novel conjugated polymers based on cyclopenta[c]thiophene-4,6(5H)-dione for efficient polymer solar cells
5. Improved efficiency of organic solar cells by transfer printing induced crystallization of active layer10.1016/j.jiec.2015.10.021 ↗
6. Over 20% efficient and stable non-fullerene-based ternary bulk-heterojunction organic solar cell with WS2 hole-transport layer and graded refractive index antireflection coating10.1002/adts.202000047 ↗
7. Effect of electron-donating methoxy groups on photovoltaic properties of triphenylamine-substituted quinoxaline-based polymers
8. Strategic structural evolution for enhancing the photovoltaic performance of quinoxaline-based polymers10.1016/j.jiec.2022.07.023 ↗
9. Design and synthesis of the quinacridone-based donor polymers for application to organic solar cells10.1016/j.jiec.2021.06.020 ↗
10. Embedded host/guest alloy aggregations enable high-performance ternary organic photovoltaics
11. Over 19% efficiency organic solar cells by regulating multidimensional intermolecular interactions10.1002/adma.202208986 ↗
12. Exploring vanadium-chalcogenides toward solar cell application: a review10.1016/j.jiec.2023.09.004 ↗
13. The voltage loss in organic solar cells10.1088/1674-4926/44/1/010202 ↗
14. Achieving 12.8% efficiency by simultaneously improving open-circuit voltage and short-circuit current density in tandem organic solar cells10.1002/adma.201606340 ↗
15. A new polymer donor for efficient polymer solar cells: simultaneously realizing high short-circuit current density and transparency10.1039/C8TA05207G ↗
16. High-performance conjugated polymer donor materials for polymer solar cells with narrow-bandgap nonfullerene acceptors10.1039/C9EE02531F ↗
17. Recent advances in molecular design of functional conjugated polymers for high-performance polymer solar cells10.1016/j.progpolymsci.2019.101175 ↗
18. Alkoxy substituted benzodithiophene-alt-fluorobenzotriazole copolymer as donor in non-fullerene polymer solar cells10.1007/s11426-016-0173-y ↗
19. Effects of alkylthio and alkoxy side chains in polymer donor materials for organic solar cells, macromol10.1002/marc.201500620 ↗
20. Subtle side chain triggers unexpected two-channel charge transport property enabling 80% fill factors and efficient thick-film organic photovoltaics
21. Interchain hydrogen-bonded conjugated polymer for enhancing the stability of organic solar cells10.1016/j.jiec.2022.05.001 ↗
22. Effects of bulk heterojunction morphology control via thermal annealing on the fill factor of anthracene-based polymer solar cells10.1007/s13233-020-8107-z ↗
23. Metal-free organic dyes with di(1-benzothieno)[3,2-b:2′,3′-d]pyrrole as a donor for efficient dye-sensitized solar cells: Effect of mono- and bi-anchors on photovoltaic performance10.1016/j.dyepig.2019.02.003 ↗
24. New developments in non-fullerene small molecule acceptors for polymer solar cells10.1039/C6QM00247A ↗
25. Open circuit voltage increase by substituted spacer and thieno[3,4-c]pyrrole-4,6-dione for polymer solar cells10.1016/j.jiec.2013.04.037 ↗
26. BDT-based donor polymer for organic solar cells to achieve high efficiency over 15% for ternary organic solar cells10.1007/s13233-023-00117-w ↗
27. A simple approach for fabrication of low-temperature processible inverted organic solar cells10.1016/j.jiec.2023.04.026 ↗
28. A step-by-step strategy to enhancing the photovoltaic performance of indandione-based polymers
29. Medium bandgap polymers for efficient non-fullerene polymer solar cells—an in-depth study of structural diversity of polymer structure10.3390/ijms24010522 ↗
30. Utilizing alkoxyphenyl substituents for side-chain engineering of efficient benzo[1,2-b:4,5-b′]dithiophene-based small molecule organic solar cells10.1039/C5CP02632F ↗
31. Efficient non-fullerene polymer solar cells based on a wide bandgap polymer of: meta -alkoxy-phenyl-substituted benzodithiophene and difluorobenzotriazole10.1039/C7TA06476D ↗
32. Effects of alkoxy chain length in alkoxy-substituted dihydronaphthyl-based [60]fullerene bisadduct acceptors on their photovoltaic properties10.1021/am301629d ↗
33. Alternating polymers based on fluorinated alkoxyphenyl-substituted benzo[1,2-b:4,5-b′]dithiophene and isoindigo derivatives for polymer solar cells10.1016/j.dyepig.2017.07.024 ↗
34. Design and synthesis of a low bandgap small molecule acceptor for efficient polymer solar cells10.1002/adma.201602642 ↗
35. A-D-A small molecule acceptors with ladder-type arenes for organic solar cells10.1039/C8TA02534G ↗
36. Synthesis of quinoxaline-based polymers with multiple electron-withdrawing groups for polymer solar cells10.1016/j.jiec.2019.01.024 ↗
37. A donor polymer with a good compromise between efficiency and sustainability for organic solar cells10.1002/aesr.202100069 ↗
38. Synthesis of PCDTBT-based fluorinated polymers for high open-circuit voltage in organic photovoltaics: towards an understanding of relationships between polymer energy levels engineering and ideal morphology control10.1021/am500891z ↗
39. Alkyl chain length effects of polymer donors on the morphology and device performance of polymer solar cells with different acceptors10.1002/aenm.201901740 ↗
40. Alkyl chain barriers for kinetic optimization in dye-sensitized solar cells10.1021/ja065653f ↗
41. Polymer solar cells with enhanced fill factors10.1038/nphoton.2013.207 ↗
42. Effects of alkyl chain length and anion on the optical and electrochemical properties of AIE-active α-cyanostilbene-containing triphenylamine derivatives10.1039/D0TC00683A ↗
43. Tuning the photovoltaic performances of the terpolymers based on thiophene-benzene-thiophene via the modification of alkyl side chains10.1002/app.42982 ↗
44. Influence of alkyl chain length on the solid-state properties and transistor performance of BN-substituted tetrathienonaphthalenes10.1039/C4TC01369G ↗
45. Impact of alkyl chain length on the properties of fluorenyl-based linear hole-transport materials in p-i-n perovskites solar cells10.1021/acsaem.2c00197 ↗
46. Enhanced photovoltaic performance of quinoxaline-based donor-acceptor type polymers with monocyano substituent10.1016/j.jpowsour.2021.229588 ↗
47. Engineering of CIGS nanoparticle inks for colloidal stability, uniform film formation and application as HTL for perovskite solar cells10.1016/j.jiec.2021.10.034 ↗
48. Frisch · 2009 · 1
49. Alkyl chain engineering of solution-processable star-shaped molecules for high-performance organic solar cells10.1002/aenm.201301234 ↗
50. Novel NIR-absorbing conjugated polymers for efficient polymer solar cells: effect of alkyl chain length on device performance10.1039/b818885h ↗
51. The effect of side-chain length on regioregular poly[3-(4-n-alkyl) phenylthiophene]/PCBM and ICBA polymer solar cells10.1039/c2jm31371e ↗
52. The influence of side chains on solubility and photovoltaic performance of dithiophene-thienopyrazine small band gap copolymers10.1016/j.polymer.2009.07.028 ↗
53. Modulation of donor alkyl terminal chains with the shifting branching point leads to the optimized morphology and efficient all-small-molecule organic solar cells10.1021/acsami.0c03977 ↗
54. Improved photovoltaic performance of ternary all-polymer solar cells by incorporating a new Y6-based polymer acceptor and PC61BM10.1007/s13233-022-0069-x ↗
55. Effect of the fibrillar microstructure on the efficiency of high molecular weight diketopyrrolopyrrole-based polymer solar cells10.1002/adma.201304360 ↗
56. Balancing crystal size in small-molecule nonfullerene solar cells through fine-tuning the film-forming kinetics to fabricate interpenetrating network10.1021/acsomega.8b01162 ↗
57. Modulation of the molecular orientation at the bulk heterojunction interface via tuning the small molecular donor-nonfullerene acceptor interactions10.1021/acsami.8b08608 ↗
58. Modulating morphology via side-chain engineering of fused ring electron acceptors for high performance organic solar cells10.1007/s11426-019-9453-7 ↗
59. Mobility-controlled performance of thick solar cells based on fluorinated copolymers10.1021/ja5067724 ↗
60. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
61. Dithienocarbazole and isoindigo based amorphous low bandgap conjugated polymers for efficient polymer solar cells10.1002/adma.201303586 ↗
62. Correlation between oxidation potential and open-circuit voltage of composite solar cells based on blends of polythiophenes/fullerene derivative10.1063/1.1650878 ↗
63. Influence of intermolecular interactions of electron donating small molecules on their molecular packing and performance in organic electronic devices10.1039/c3ta13266h ↗
64. Effect of alkyl chain length on the properties of triphenylamine-based hole transport materials and their performance in perovskite solar cells10.1039/C7CP07682G ↗
65. High-efficiency polymer solar cells with low temperature solution-processed SnO2/PFN as a dual-function electron transporting layer10.1039/C8TA06378H ↗
66. Investigating the effect of diverse structural variation of conjugated polymer electrolytes as the interlayer on photovoltaic properties10.1016/j.cej.2021.129895 ↗
67. Burn-in free nonfullerene-based organic solar cells10.1002/aenm.201700770 ↗
68. Origin of the light intensity dependence of the short-circuit current of polymer/fullerene solar cells10.1063/1.2130396 ↗
69. Impact of active layer morphology on bimolecular recombination dynamics in organic solar cells10.1021/acs.jpcc.7b07768 ↗
70. Effect of the side chain functionality of the conjugated polyelectrolytes as a cathode interlayer material on the photovoltaic performances10.1007/s13233-022-0011-2 ↗
71. Importance of domain purity and molecular packing in effi cient solution-processed small-molecule solar cells10.1002/adma.201404388 ↗
72. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient Core10.1016/j.joule.2019.01.004 ↗
73. The role of spin in the kinetic control of recombination in organic photovoltaics10.1038/nature12339 ↗
74. Modulation of donor alkyl terminal chains with the shifting branching point leads to the optimized morphology and efficient all-small-molecule organic solar cells
75. High-efficiency organic solar cells prepared using a halogen-free solution process10.1016/j.xcrp.2021.100517 ↗
76. Miscibility tuning for optimizing phase separation and vertical distribution toward highly efficient organic solar cells10.1002/advs.201900565 ↗
77. Fine tuning miscibility of donor/acceptor through solid additives enables all-polymer solar cells with 15.6% efficiency10.1002/solr.202100549 ↗
78. Significance of Siloxane Functionalized Side-Chain π-Conjugated Polymer Donor: Optimization of Active Layer Morphology Toward the Stable All-Polymer Solar Cells10.1007/s13233-022-0024-x ↗