Influence of N-type electron acceptors in perovskite absorbers for stabilized perovskite absorbers for high-performance perovskite solar cells
Source abstract
Abstract
In this study, the impact of n -type organic electron acceptors incorporated in perovskite absorbers via antisolvent-assisted crystallization process is investigated on optical, electrical, and photovoltaic properties of perovskite solar cells (PSCs). The study examines the effect of three representative electron acceptors, including fullerene derivative (PC 61BM), non-fullerene acceptor (ITIC), and fluorinated non-fullerene acceptor (ITIC-4F). The findings demonstrate that the inclusion of these electron acceptors stabilizes perovskite absorbers due to strong interaction between the organic acceptors and [PbI6] 4- octahedra, leading to the successful passivation of defective antisites. Furthermore, ITIC-4F plays a crucial role in the tailored electronic structure of the perovskite absorber surface, facilitating efficient charge transport and suppressing carrier recombination in the device. The synergetic effect of defect passivation and electrical doping achieved by ITIC-4F resulted in an efficiency improvement of 17.31 % of MAPbI 3-based PSCs under 1-Sun illumination, exceeding that of the pristine device (15.62 %) under the same conditions. The device passivated with ITIC-4F also delivered an efficiency of 20.00 % under dim-light irradiation conditions for indoor photovoltaic applications. The results highlight the potential of n -type organic semiconducting molecules as effective additives in the antisolvent-assisted crystallization of perovskite absorbers, offering valuable insights into the design of organic semiconducting additives for improving the film quality of perovskite absorbers and achieving high-performance PSCs. The findings provide a foundation for future research aimed at enhancing the optoelectronic properties and photovoltaic performance of PSCs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Solid-state spectroscopy and crystallography
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Enhanced moisture stability of mixed cation perovskite solar cells enabled by a room-temperature solution-processed organic-inorganic bilayer hole transport layer10.1016/j.jallcom.2020.156512 ↗
2. Self-elimination of intrinsic defects improves the low-temperature performance of perovskite photovoltaics10.1016/j.joule.2020.07.006 ↗
3. Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells10.1038/nmat4014 ↗
4. The rise of highly efficient and stable perovskite solar cells10.1021/acs.accounts.6b00492 ↗
5. Simultaneously modifying hole transport material and perovskite via a crown ether-based semiconductor toward efficient and stable perovskite solar cells
6. High charge carrier mobilities and lifetimes in organolead trihalide perovskites10.1002/adma.201305172 ↗
7. Reduced energy loss in SnO2/ZnO bilayer electron transport layer-based perovskite solar cells for achieving high efficiencies in outdoor/indoor environments10.1039/D0TA04721J ↗
8. Merocyanine with hole-transporting ability and efficient defect passivation effect for perovskite solar cells10.1021/acsenergylett.1c00124 ↗
9. Tailored electronic properties of Zr-doped SnO2 nanoparticles for efficient planar perovskite solar cells with marginal hysteresis10.1016/j.nanoen.2019.104014 ↗
10. On the role of carboxylated polythiophene in defect passivation of CsPbI2Br surface for efficient and stable all‐inorganic perovskite solar cellsInternational10.1002/er.7540 ↗
11. A smart way to prepare solution-processed and annealing-free PCBM electron transporting layer for perovskite solar cells10.1002/adsu.202200212 ↗
12. Room-temperature synthesis of ZrSnO4 nanoparticles for electron transport layer in efficient planar hetrojunction perovskite solar cells10.1016/j.jmst.2019.11.008 ↗
13. Halide perovskites: poor man's high-performance semiconductors10.1002/adma.201600265 ↗
14. Impact of microstructure on local carrier lifetime in perovskite solar cells10.1126/science.aaa5333 ↗
15. Supramolecular halogen bond passivation of organic–inorganic halide perovskite solar cells10.1021/nl500627x ↗
16. Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells10.1038/ncomms8747 ↗
17. High-efficiency solution-processed perovskite solar cells with millimeter-scale grains, W. Nie, H. Tsai, R. Asadpour, J.-C. Blancon, A.J. Neukirch, G. Gupta, J.J. Crochet, M. Chhowalla, S. Tretiak, M.A. Alam, H.-L. Wang, A.D. Mohite, High-efficiency solution-processed perovskite solar cells with millimeter-scale grains, Science, 347 (2015) 522-525..10.1126/science.aaa0472 ↗
18. A thiourea additive-based quadruple cation lead halide perovskite with an ultra-large grain size for efficient perovskite solar cells10.1039/C9NR07377A ↗
19. Methylammonium, formamidinium and ethylenediamine mixed triple-cation perovskite solar cells with high efficiency and remarkable stability
20. Improved environmental stability and solar cell efficiency of (MA,FA)PbI3 perovskite using a wide-band-gap 1D thiazolium lead iodide capping layer strategy10.1021/acsenergylett.9b00930 ↗
21. high‐performance perovskite solar cells with enhanced environmental stability based on a (p-FC6H4C2H4NH3)2[PbI4] capping laye10.1002/aenm.201802595 ↗
22. Stable and scalable 3D-2D planar heterojunction perovskite solar cells via vapor deposition10.1016/j.nanoen.2019.03.014 ↗
23. Interfacial charge behavior modulation in 2D/3D perovskite heterostructure for potential high-performance solar cells10.1016/j.nanoen.2019.02.069 ↗
24. D imensional engineering of a graded 3D-2D halide perovskite interface enables ultrahigh VOC enhanced stability in the p-i-n photovoltaics10.1002/aenm.201701038 ↗
25. Interlayer interaction enhancement in ruddlesden–popper perovskite solar cells toward high efficiency and phase stability10.1021/acsenergylett.9b00351 ↗
26. Exploring inorganic binary alkaline halide to passivate defects in low-temperature-processed planar-structure hybrid perovskite solar cells10.1002/aenm.201800138 ↗
27. Interface engineering via an insulating polymer for highly efficient and environmentally stable perovskite solar cells10.1039/C6CC06290C ↗
28. Hydrophobic polystyrene passivation layer for simultaneously improved efficiency and stability in perovskite solar cells10.1021/acsami.8b04776 ↗
29. Dual passivation of SnO2 by tetramethylammonium chloride for high-performance CsPbI2Br-based inorganic perovskite solar cells10.1021/acs.chemmater.1c00098 ↗
30. Enhanced interfacial characteristics of perovskite solar cell with multi-functional organic hole-selective interlayer10.1016/j.dyepig.2021.109837 ↗
31. A facile surface trap passivation of perovskite absorber enabled by tetrabenzocorrolazine dye for efficient and stable planar perovskite solar cells10.1016/j.dyepig.2023.111333 ↗
32. A functionalized phosphorous tetrabenzotriazacorrole dye as a novel passivating agent of high-performance planar perovskite solar cells
33. High-performance perovskite solar cells with enhanced environmental stability based on amphiphile-modified CH3NH3PbI310.1002/adma.201505255 ↗
34. Perovskite solar cells with 18.21% efficiency and area over 1 cm2 fabricated by heterojunction engineering10.1038/nenergy.2016.148 ↗
35. Fluorinated fused nonacyclic interfacial materials for efficient and stable perovskite solar cells10.1039/C7TA06923E ↗
36. Enhanced performance of perovskite solar cells via anti-solvent nonfullerene Lewis base IT-4F induced trap-passivation10.1039/C8TA00583D ↗
37. π-Conjugated Lewis base: efficient trap-passivation and charge-extraction for hybrid perovskite solar cells10.1002/adma.201604545 ↗
38. A low temperature processed fused-ring electron transport material for efficient planar perovskite solar cells10.1039/C7TA09543K ↗
39. ITIC surface modification to achieve synergistic electron transport layer enhancement for planar-type perovskite solar cells with efficiency exceeding 20%10.1039/C7TA01636K ↗
40. Low-temperature processed high-performance flexible perovskite solar cells via rationally optimized solvent washing treatments10.1039/C4RA13212B ↗
41. Perovskite–fullerene hybrid materials suppress hysteresis in planar diodes10.1038/ncomms8081 ↗
42. Nonradiative losses in metal halide perovskites10.1021/acsenergylett.7b00239 ↗
43. Binary-mixed organic electron transport layers for planar heterojunction perovskite solar cells with high efficiency and thermal reliability
44. Passivation of the grain boundaries of CH3NH3PbI3 using carbon quantum dots for highly efficient perovskite solar cells with excellent environmental stability10.1039/C8NR08295B ↗
45. High efficiency solid-state sensitized solar cell-based on submicrometer rutile TiO2 nanorod and CH3NH3PbI3 perovskite sensitizer10.1021/nl400286w ↗
46. Controlled growth of perovskite layers with volatile alkylammonium chlorides10.1038/s41586-023-05825-y ↗
47. Reduced interface energy loss in non-fullerene organic solar cells using room temperature-synthesized SnO2 quantum dots10.1016/j.jmst.2020.02.054 ↗
48. Urbach rule in solid state physics
49. Electron-hole diffusion lengths > 175 μm in solution-grown CH3NH3PbI3 single crystals10.1126/science.aaa5760 ↗
50. Simultaneously enhanced efficiency and ambient stability of inorganic perovskite solar cells by employing tetramethylammonium chloride additive in CsPbI2Br10.1016/j.jmst.2021.05.084 ↗