journal article·2013-02

High yield fabrication of vertical interdigital electrodes with sub micrometer distance and their application in an organic photovoltaic device

F. Stelzl, J. Schulz-Gericke, M. Niggemann, U. Würfel

Organic Electronics· Volume 14· Issue 2
Publisher page

Abstract

Abstract This work reports on a new method to fabricate vertical, interdigital electrodes of different materials with sub micrometer distance. The electrodes are deposited by thermal evaporation on a micro replicated surface relief grating structure with high aspect ratio utilizing the shadowing effect of the structures. The optimized process presented here leads to a high yield in separated electrodes on micro replicated samples and tolerates topographical defects in them. As one of many potential applications, we demonstrate the functionality in organic solar cells (OSCs) composed of poly (3-hexylthiophene) (P3HT) blended with C61-butyric acid methyl ester (PCBM). Using approx. 2500 electrode pairs connected in parallel a solar power conversion efficiency of 0.5% was achieved. This is a tenfold increase compared to previously reported values of OSCs on this setup, which is attributed to the improved processing scheme of the nanoelectrodes. Optical simulations were performed to evaluate the 2D-absorption profile and calculate the theoretical limit for the short circuit current density in these devices. The results indicate that the majority of the nanoelectrodes are intact.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanowire Synthesis and Applications · Nanofabrication and Lithography Techniques · Near-Field Optical Microscopy

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. A capacitive CO2 sensor system with suppression of the humidity interference10.1016/S0925-4005(99)00060-X ↗
2. Advances in organic transistor-based biosensors: from organic electrochemical transistors to electrolyte-gated organic field-effect transistors10.1007/s00216-011-5363-y ↗
3. Algal fluorescence sensor integrated into a microfluidic chip for water pollutant detection10.1039/C2LC20998E ↗
4. Light-emitting diodes based on conjugated polymers10.1038/347539a0 ↗
5. Stability of polymeric thin film transistors for X-ray imaging applications10.1063/1.2785946 ↗
6. Flexible organic transistors and circuits with extreme bending stability10.1038/nmat2896 ↗
7. Low dose ionizing radiation detection using conjugated polymers10.1063/1.1891300 ↗
8. M. Niggemann, D. Ruf, B. Blasi, M. Glatthaar, M. Riede, C. Muller, B. Zimmermann, A. Gombert, Functional substrates for flexible organic photovoltaic cells, in: Spie – Optics and Photonics, vol. 5938, San Diego California, 2005, pp. 1–9.
9. Brabec · 2008
10. Voltage-induced formation of accumulation layers at electrode interfaces in organic solar cells10.1002/aenm.201100569 ↗
11. Fabrication and processing of polymer solar cells: a review of printing and coating techniques
12. A roll-to-roll process to flexible polymer solar cells: model, studies, manufacture and operational stability studies10.1039/b823001c ↗
13. Solution-processed organic solar cells10.1557/mrs2008.138 ↗
14. Solar cell efficiency tables (version 39)10.1002/pip.2163 ↗
15. Optimization of thickness and morphology of active layer for high performance of bulk-heterojunction organic solar cells10.1016/j.solmat.2010.02.041 ↗
16. Polymer solar cells: recent approaches and achievements10.1021/jp9061362 ↗
17. Effect of solvents on the performance and morphology of polymer photovoltaic devices10.1016/j.cap.2009.10.013 ↗
18. Interface materials for organic solar cells10.1039/b921624c ↗
19. The importance of post-annealing process in the device performance of poly(3-hexylthiophene): methanofullerene polymer solar cell10.1016/j.solmat.2006.11.010 ↗
20. Effects of annealing on the nanomorphology and performance of poly(alkylthiophene):fullerene bulk-heterojunction solar cells10.1002/adfm.200601038 ↗
21. Thermal characterization and annealing effects of polythiophene/fullerene photoactive layers for solar cells10.1016/j.tsf.2005.12.092 ↗
22. Investigation of optimum conditions for high-efficiency organic thin-film solar cells based on polymer blends10.1016/j.jphotochem.2006.03.031 ↗
23. Device annealing effect in organic solar cells with blends of regioregular poly(3-hexylthiophene) and soluble fullerene10.1063/1.1861123 ↗
24. Realization of ultrahigh photovoltages with organic photovoltaic nanomodules10.1002/adma.200801744 ↗
25. Some application cases and related manufacturing techniques for optically functional microstructures on large areas10.1117/1.1803552 ↗
26. Origination of nano- and micro-structures on large areas by interference lithography10.1016/j.mee.2012.05.018 ↗
27. Longterm stability of efficient inverted P3HT:PCBM solar cells10.1016/j.solmat.2008.12.022 ↗
28. Transition metal oxides as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗
29. A.c. conductivity studies on al/moo3/al sandwich structures10.1016/0921-5107(94)01173-7 ↗
30. Depletion of pcbm at the cathode interface in p3ht/pcbm thin films as quantified via neutron reflectivity measurements10.1002/adma.200903971 ↗
31. Morphology evolution via self-organization and lateral and vertical diffusion in polymer: fullerene solar cell blends10.1038/nmat2102 ↗
32. Substrate-dependent interface composition and charge transport in films for organic photovoltaics10.1063/1.3149706 ↗
33. Rigorous coupled-wave analysis of planar-grating diffraction10.1364/JOSA.71.000811 ↗
34. Highly improved convergence of the coupled-wave method for tm polarization10.1364/JOSAA.13.000779 ↗
35. Computation of the near-field pattern with the coupled-wave method for transverse magnetic polarization10.1080/09500349808230634 ↗
36. M. Niggemann, T. Ziegler, M. Glatthaar, M. Riede, B. Zimmermann, A. Gombert, Optical near field phenomena in planar and structured organic solar cells, in: SPIE – Proceedings: Organic Optoelectronics and Photonics, vol. 6197, 2006.10.1117/12.662063 ↗
37. Minimizing optical losses in bulk heterojunction polymer solar cells10.1007/s00340-006-2542-1 ↗
38. Space-charge limited photocurrent10.1103/PhysRevLett.94.126602 ↗
39. Diffraction gratings and buried nano-electrodes – architectures for organic solar cells10.1016/j.tsf.2003.11.028 ↗