journal article·2018-05

Improvement of photovoltaic performance of polymer and fullerene based bulk heterojunction solar cells prepared by the combination of directional solidification and convective deposition techniques

Anusit Kaewprajak, Pisist Kumnorkaew, Takashi Sagawa

Publisher page

Abstract

Abstract Combination of directional solidification and convective deposition techniques was demonstrated for preparation of organic thin-film solar cells with poly[N-9′-heptadecanyl-2,7-carbazole-alt-5,5-(4′,7′-di-2-thienyl-2′,1′,3′-benzothiadiazole)] (PCDTBT) and [6,6]-phenyl C71 butyric acid methyl ester (PC71BM) as the active layer, and 1,3,5-trichlorobenzene (135-TCB) as the solidifying reagent. The nucleation density and directional solidification of PCDTBT:PC71BM films were controlled by the amount of 135-TCB and the coating direction of convective deposition. We found that hole mobility and power conversion efficiency (PCE) of PCDTBT:PC71BM based solar cells can be enhanced by the addition of 135-TCB into the PCDTBT:PC71BM layer. Through the optimization of photovoltaic performance, 30% improvement of PCE was attained when 20 mg mL−1 of 135-TCB was used for preparation of the cell as compared to the device without 135-TCB under the atmospheric conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Morphology control strategies for solution-processed organic semiconductor thin films10.1039/C4EE00688G ↗
2. Solution coating of large-area organic semiconductor thin films with aligned single-crystalline domains10.1038/nmat3650 ↗
3. Effect of solution shearing method on packing and disorder of organic semiconductor polymers10.1021/cm503780u ↗
4. Fabrication of efficient organic and hybrid solar cells by fine channel mist spray coating10.1016/j.solmat.2014.04.010 ↗
5. Performance of polymer solar cells fabricated by dip coating process10.1016/j.solmat.2011.12.002 ↗
6. Controlled growth of ultrathin film of organic semiconductors by balancing the competitive processes in dip-coating for organic transistors10.1021/acs.langmuir.6b01083 ↗
7. Fabrication of polymer solar cells from organic nanoparticle dispersions by doctor blading or ink-jet printing10.1016/j.orgel.2015.10.011 ↗
8. Performance analysis of printed bulk heterojunction solar cells10.1002/adfm.200500581 ↗
9. Template-guided solution-shearing method for enhanced charge Carrier mobility in diketopyrrolopyrrole-based polymer field-effect transistors10.1002/adma.201401179 ↗
10. Investigation of the deposition of microsphere monolayers for fabrication of microlens arrays10.1021/la801100g ↗
11. Effect of nanoparticle concentration on the convective deposition of binary suspensions10.1021/la804209m ↗
12. Matching constituent fluxes for convective deposition of binary suspensions10.1021/la902856x ↗
13. Suppression of the coffee-ring effect by shape-dependent capillary interactions10.1038/nature10344 ↗
14. Additives for morphology control in high-efficiency organic solar cells10.1016/j.mattod.2013.08.013 ↗
15. For the bright future—bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
16. Synergistic effects of solvent and polymer additives on solar cell performance and stability of small molecule bulk heterojunction solar cells10.1039/C6TA08278E ↗
17. Improvement of polycarbazole-based organic bulk-heterojunction solar cells using 1,8-diiodooctane10.1063/1.4823582 ↗
18. Enhanced performance and morphological evolution of PTB7:PC71BM polymer solar cells by using solvent mixtures with different additives10.1039/C4CP05826G ↗
19. Improving the nanoscale morphology and processibility for PCDTBT-based polymer solar cells via solvent mixtures10.1016/j.orgel.2012.08.003 ↗
20. Flexographic printing of polycarbazole-based inverted solar cells10.1016/j.orgel.2017.10.016 ↗
21. Butanedithiol solvent additive extracting fullerenes from donor phase to improve performance and photostability in polymer solar cells10.1021/acsami.6b16538 ↗
22. Removal of residual diiodooctane improves photostability of high-performance organic solar cell polymers10.1021/acs.chemmater.5b04346 ↗
23. Orientation of regioregular poly(3-hexylthiophene) by directional solidification: a simple method to reveal the semicrystalline structure of a conjugated polymer10.1002/adma.200501838 ↗
24. Effect of molecular weight on the structure and morphology of oriented thin films of regioregular poly(3-hexylthiophene) grown by directional epitaxial solidification10.1002/adfm.200600673 ↗
25. Fabrication of oriented and periodic hybrid nanostructures of regioregular poly(3-hexylthiophene) and CdSe nanocrystals by directional epitaxial solidification10.1002/adma.200700311 ↗
26. Highly oriented and crystalline films of a phenyl-substituted polythiophene prepared by epitaxy: structural model and influence of molecular weight10.1021/acs.macromol.6b00495 ↗
27. One-step macroscopic alignment of conjugated polymer systems by epitaxial crystallization during spin-coating10.1002/adfm.201202983 ↗
28. Influence of crystallizable solvent on the morphology and performance of P3HT: PCBM bulk-heterojunction solar cells10.1016/j.solmat.2009.11.018 ↗
29. Preparation of PCDTBT nanofibers with a diameter of 20 nm and their application to air-processed organic solar cells10.1039/c3nr05538h ↗
30. Influence of thermal annealing on PCDTBT: PCBM composition profiles10.1002/aenm.201300981 ↗
31. Influence of fullerene photodimerization on the PCBM crystallization in polymer: fullerene bulk heterojunctions under thermal stress10.1002/polb.23330 ↗
32. Fullerene bisadduct as an effective phase-separation inhibitor in preparing poly(3-hexylthiophene)–[6,6]-phenyl-C 61 -butyric acid methyl ester blends with highly stable morphology10.1039/c2jm32444j ↗
33. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
34. Molecular-weight-dependent mobilities in regioregular poly(3-hexyl-thiophene) diodes10.1063/1.1891301 ↗
35. Carrier tunneling and device characteristics in polymer light-emitting diodes10.1063/1.356350 ↗
36. Carrier mobility of organic semiconductors based on current-voltage characteristics10.1063/1.3305341 ↗
37. Interface-engineering additives of poly(oxyethylene tridecyl ether) for low-band gap polymer solar cells consisting of PCDTBT: PCBM70 bulk-heterojunction layers10.1364/OE.21.00A146 ↗
38. The performance enhancement of polymer solar cells by introducing cadmium-free quantum dots10.1021/acs.jpcc.5b08692 ↗
39. Improving the morphology of PCDTBT: PC70BM bulk heterojunction by mixed-solvent vapor-assisted imprinting: inhibiting intercalation, optimizing vertical phase separation, and enhancing photon absorption10.1021/jp409517q ↗
40. Effects of tetramethylene sulfone solvent additives on conductivity of PEDOT: PSS film and performance of polymer photovoltaic cells10.1016/j.orgel.2012.11.005 ↗
41. High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor10.1038/ncomms11585 ↗
42. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗