Improving efficiency and flexibility of non-halogenated solvent-processed dual-layer organic solar cells through solvent vapor annealing
Source abstract
Abstract
Dual-layer organic solar cells (OSCs), fabricated through sequential-casting with separately dissolved donor and acceptor materials, offer simplified solution preparation and morphology control. However, the poor solubility of organic materials in non-halogenated solvents often results in undesirable vertical component distribution and insufficient donor/acceptor interfaces in non-halogenated solvent-processed dual-layer OSCs, adversely affecting photovoltaic performance and flexibility. In this study, we applied a solvent vapor annealing (SVA) method using CS 2 solvent in o-xylene solvent-processed dual-layer OSCs. The SVA method effectively adjusted the vertical component distribution of the active layer and increased the donor/acceptor interfaces, leading to an improved power conversion efficiency (PCE) of 17.24 %. Additionally, SVA films exhibited superior tensile properties, with a crack onset strain of 5.07 %, surpassing that of the as-cast films (4.32 %), attributed to the stronger interaction between the donor and acceptor layers with more donor/acceptor interfaces. Consequently, large-area (1 cm 2) flexible devices achieved a significant efficiency of 14.20 % and maintained excellent mechanical flexibility, with 80 % of the initial efficiency retained after 1000 bending cycles. This work presents an effective approach for fabricating high-performance non-halogenated solvent-processed flexible dual-layer OSCs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Poly(dimethylsiloxane)-block-PM6 polymer donors for high-performance and mechanically robust polymer solar cells10.1002/adma.202300230 ↗
2. Small-molecular donor guest achieves rigid 18.5% and flexible 15.9% efficiency organic photovoltaic via fine-tuning microstructure morphology10.1016/j.joule.2021.06.017 ↗
3. Material design and device fabrication strategies for stretchable organic solar cells
4. Understanding energy loss in organic solar cells: toward a new efficiency regime10.1016/j.joule.2017.09.020 ↗
5. High-performance semi-transparent organic photovoltaic devices via improving absorbing selectivity
6. Medium band-gap non-fullerene acceptors based on a benzothiophene donor moiety enabling high-performance indoor organic photovoltaics10.1039/D1EE00687H ↗
7. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
8. Chlorinated polymerized small molecule acceptor enabling ternary all-polymer solar cells with over 16.6% efficiency10.1007/s11426-022-1219-7 ↗
9. Low-cost organic photovoltaic materials with great application potentials enabled by developing isomerized non-fused ring acceptors10.1007/s11426-022-1502-3 ↗
10. Application of crystallization kinetics strategy in morphology control of solar cells based on nonfullerene blends
11. Real-time probing and unraveling the morphology formation of blade-coated ternary nonfullerene organic photovoltaics with in situ X-ray scattering10.1002/adfm.202213248 ↗
12. Dilution effect for highly efficient multiple-component organic solar cells10.1038/s41565-021-01011-1 ↗
13. Manipulating the D: a interfacial energetics and intermolecular packing for 19.2% efficiency organic photovoltaics10.1039/D2EE00595F ↗
14. Desired open-circuit voltage increase enables efficiencies approaching 19% in symmetric-asymmetric molecule ternary organic photovoltaics10.1016/j.joule.2022.02.001 ↗
15. 19.28% efficiency and stable polymer solar cells enabled by introducing an NIR-absorbing guest acceptor10.1002/adfm.202211385 ↗
16. Tandem organic solar cells with efficiency over 19% via the careful subcell design and optimization
17. Sequential deposition of multicomponent bulk heterojunctions increases efficiency of organic solar cells
18. Single-junction organic solar cells with over 19% efficiency enabled by a refined double-fibril network morphology10.1038/s41563-022-01244-y ↗
19. A 19% efficient and stable organic photovoltaic device enabled by a guest nonfullerene acceptor with fibril-like morphology10.1039/D2EE03483B ↗
20. Compromising charge generation and recombination of organic photovoltaics with mixed diluent strategy for certified 19.4% efficiency
21. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
22. A nonfullerene acceptor with a 1000 nm absorption edge enables ternary organic solar cells with improved optical and morphological properties and efficiencies over 1510.1039/C9EE01030K ↗
23. Graded bulk-heterojunction enables 17% binary organic solar cells via nonhalogenated open air coating10.1038/s41467-021-25148-8 ↗
24. Fibrillization of non-fullerene acceptors enables 19% efficiency pseudo-bulk heterojunction organic solar cells
25. A universal layer-by-layer solution-processing approach for efficient non-fullerene organic solar cells10.1039/C8EE02560F ↗
26. Nonhalogenated dual-slot-die processing enables high-efficiency organic solar cells10.1002/adma.202202659 ↗
27. Investigation of tunable halogen-free solvent engineering on aggregation and miscibility towards high-performance organic solar cells10.1016/j.nanoen.2021.106678 ↗
28. 14.4% efficiency all-polymer solar cell with broad absorption and low energy loss enabled by a novel polymer acceptor10.1016/j.nanoen.2020.104718 ↗
29. A guest-assisted molecular-organization approach for> 17% efficiency organic solar cells using environmentally friendly solvents10.1038/s41560-021-00923-5 ↗
30. High-performance organic solar cells from non-halogenated solvents
31. Hot-casting boosts efficiency of halogen-free solvent processed non-fullerene organic solar cells10.1002/adfm.202105794 ↗
32. Pseudo-bilayer architecture enables high-performance organic solar cells with enhanced exciton diffusion length10.1038/s41467-020-20791-z ↗
33. Achieving over 15% efficiency in organic photovoltaic cells via copolymer design10.1002/adma.201808356 ↗
34. Non-fullerene acceptors with branched side chains and improved molecular packing to exceed 18% efficiency in organic solar cells10.1038/s41560-021-00820-x ↗
35. Advances in the device design and printing technology for eco-friendly organic photovoltaics10.1039/D2EE03246E ↗
36. Phase separation and domain crystallinity control enable open-air-printable highly efficient and sustainable organic photovoltaics10.1002/inf2.12530 ↗
37. Enhancement of VOC without loss of JSC in organic solar cells by modification of donor/acceptor interfaces10.1002/aenm.201301332 ↗
38. Simultaneously enhancing exciton/charge transport in organic solar cells by an organoboron additive10.1002/adma.202205926 ↗
39. An insight into the role of side chains in the microstructure and carrier mobility of high-performance conjugated polymers10.1039/D1PY00105A ↗
40. Modulation of vertical component distribution for large-area thick-film organic solar cells
41. Blade-coated efficient and stable large-area organic solar cells with optimized additive10.1016/j.orgel.2020.105771 ↗
42. Regulating crystallization to maintain balanced carrier mobility via ternary strategy in blade-coated flexible organic solar cells10.1016/j.orgel.2020.106027 ↗
43. Morphology optimization in ternary organic solar cells10.1007/s10118-017-1898-5 ↗
44. A blade-coated highly efficient thick active layer for non-fullerene organic solar cells10.1039/C9TA09799F ↗
45. Pseudo-planar heterojunction organic photovoltaics with optimized light utilization for printable solar windows
46. Printable and large-area organic solar cells enabled by a ternary pseudo-planar heterojunction strategy
47. Layer-by-Layer processed ternary organic photovoltaics with efficiency over 1810.1002/adma.202007231 ↗
48. Correlating stiffness, ductility, and morphology of polymer: fullerene films for solar cell applications10.1002/aenm.201200595 ↗