High Stability of Broadband Photomultiplier Organic Photodetector with metal ion-chelated polymer as an electron tunneling injection dipole layer
Source abstract
Abstract
Broadband photomultiplier organic photodetectors (PM-OPDs) have tremendous potential for use in a variety of photoimaging, physical health monitoring, and wearable applications. However, the interfacial mismatch between electrodes and organic semiconductors inhibits the long-term working stability and reliability of devices. Here, we devised high-performance and stability PM-OPDs by using Zn 2+ -chelated ethoxylated-polyethylenimine (denoted as PEIE-Zn) as an electron tunneling injection dipole layer between ITO and P3HT:PC 71BM: Y6 (3:20:80) broadband photoactive layer. The specific detectivity of the PEIE-Zn-modified PM-OPDs was higher than 10 12 Jones in the whole spectral response range (350–1000 nm) under 10V bias. The external quantum efficiency of the device exceeded 1000 % in the whole spectral response range under −20V bias. The transient photoresponse curve of the device has no obvious peaks and fluctuations, and the photocurrent density drops only 2.34 % and 0.25 % at 10 V and −20 V bias after illumination, respectively. The device exhibited very good stability over the course of a week, with its photocurrent density maintained at more than 98.94 % of the initial photocurrent density in the ambient environment without encapsulation. This work improves interface contact by modifying the ITO electrode with PEIE-Zn, providing a practical design solution for devices with high response and stability for broadband PM-OPDs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · Conducting polymers and applications · Organic Electronics and Photovoltaics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Narrowband organic photodetectors - towards miniaturized, spectroscopic sensing10.1039/D1MH01215K ↗
2. Monolithic integration of metalens in silicon photomultiplier for improved photodetection efficiency10.1002/adom.202102707 ↗
3. Low‐dimensional metal halide perovskite photodetectors
4. Recent progress of heterojunction ultraviolet photodetectors: materials, integrations, and applications
5. Significant dark current suppression in organic photodetectors using side chain fluorination of conjugated polymer
6. Ultraflexible integrated organic electronics for ultrasensitive photodetection10.1002/admt.202000956 ↗
7. A high‐resolution thin‐film fingerprint sensor using a printed organic photodetector10.1002/admt.201900651 ↗
8. Achieving EQE of 16,700% in P3HT:PC71BM based photodetectors by trap-assisted photomultiplication10.1038/srep09181 ↗
9. Highly stable photomultiplication-type organic photodetectors with single polymers containing intramolecular traps as the active layer10.1039/D2TC01297A ↗
10. Photomultiplication type quasi-planar all-polymer photodetectors with tunable response range
11. High responsivity of narrowband photomultiplication organic photodetector via interfacial modification10.1002/adom.202203132 ↗
12. Flexible organic photodetectors with mechanically robust zinc oxide nanoparticle thin films10.1021/acsami.3c00947 ↗
13. Photovoltaic mode ultraviolet organic photodetectors with high on/off ratio and fast response10.1002/adom.201400227 ↗
14. Perylene diimides: a thickness-insensitive cathode interlayer for high performance polymer solar cells10.1039/c4ee00022f ↗
15. Work-function-controlled operation mode transition between photodiode and photoconductor modes in organic photodetectors10.1016/j.orgel.2018.10.022 ↗
16. Overall enhanced performance of polymer photodetectors by Co-modifying ITO with PEIE and ZnO10.1002/pssr.202200117 ↗
17. Cathode engineering with perylene-diimide interlayer enabling over 17% efficiency single-junction organic solar cells10.1038/s41467-020-16509-w ↗
18. Highly sensitive organic photodetectors with tunable spectral response under Bi-directional bias10.1002/adom.201600387 ↗
19. PEIE doped ZnO as a tunable cathode interlayer for efficient polymer solar cells10.1016/j.apsusc.2018.11.166 ↗
20. A flexible UV-Vis-NIR photodetector based on a perovskite/conjugated-polymer composite10.1002/adma.201600468 ↗
21. Prospects of colour selective organic photodiodes10.1039/C8TC04371J ↗
22. Exploration of near-infrared organic photodetectors10.1021/acs.chemmater.9b00966 ↗
23. Self-powered ultraflexible photonic skin for continuous bio-signal detection via air-operation-stable polymer light-emitting diodes10.1038/s41467-021-22558-6 ↗
24. An all-organic self-powered photodetector with ultraflexible dual-polarity output for biosignal detection
25. A flexible sensitive visible‐NIR organic photodetector with high durability10.1002/admt.202300207 ↗
26. Panchromatic photomultiplication-type organic photodetectors with planar/bulk heterojunction structure10.1007/s40843-022-2241-3 ↗
27. Impact of contact evolution on the shelf life of organic solar cells10.1039/b910213b ↗
28. Inverted polymer solar cell based on MEH-PPV/PC 61 BM coupled with ZnO nanoparticles as electron transport layer10.1016/j.apsusc.2017.06.322 ↗
29. Solution-Processed zinc oxide/polyethylenimine nanocomposites as tunable electron transport layers for highly efficient bulk heterojunction polymer solar cells10.1021/acsami.5b00521 ↗
30. Photomultiplication type organic photodetectors based on electron tunneling injection10.1039/C9NR09926C ↗
31. 16.67% rigid and 14.06% flexible organic solar cells enabled by ternary heterojunction strategy10.1002/adma.201902210 ↗
32. Robust metal ion-chelated polymer interfacial layer for ultraflexible non-fullerene organic solar cells10.1038/s41467-020-18373-0 ↗
33. A universal method to produce low–work function electrodes for organic electronics10.1126/science.1218829 ↗
34. High sensitivity and fast response solution processed polymer photodetectors with polyethylenimine ethoxylated (PEIE) modified ITO electrode10.1364/OE.25.007719 ↗
35. High sensitivity, fast response and low operating voltage organic photodetectors by incorporating a water/alcohol soluble conjugated polymer anode buffer layer10.1039/C6RA26750E ↗
36. Improved photomultiplication in inverted-structure organic photodetectors via interfacial engineering10.1063/1.5026643 ↗
37. Ultrahigh gain polymer photodetectors with spectral response from UV to near-infrared using ZnO nanoparticles as anode interfacial layer10.1002/adfm.201601980 ↗
38. Photomultiplication type organic photodetectors with tunable spectral response range10.1016/j.orgel.2019.03.055 ↗
39. Photomultiplication type broad response organic photodetectors with one absorber layer and one multiplication layer10.1021/acs.jpclett.9b03323 ↗
40. Ultraviolet to near-infrared broadband organic photodetectors with photomultiplication10.1016/j.orgel.2020.105739 ↗
41. Recent advances in solution‐processable organic photodetectors and applications in flexible electronics10.1002/aisy.202100167 ↗
42. Non-fullerene acceptor organic photovoltaics with intrinsic operational lifetimes over 30 years10.1038/s41467-021-25718-w ↗
43. A water/alcohol-soluble copolymer based on fluorene and perylene diimide as a cathode interlayer for inverted polymer solar cells10.1039/C5TC00450K ↗