journal article·2023-07

Three- and two-dimensional mixed metal halide perovskites for high-performance photovoltaics

Lening Shen, Haodong Wu, Tao Zhu, Xinwen Zhang, Hussain Sawwan, He Wang, Xiong Gong

Organic Electronics· Volume 118
Publisher page

Abstract

Three-dimensional (3D) metal halide perovskites (MHPs) incorporated with two-dimensional (2D) MHPs have been demonstrated to be a facile way to approach the high performance of perovskite photovoltaics (PPVs). In this study, we report high-performance PPVs, in terms of efficiency, detectivity, stability, and photocurrent hysteresis, based on the 3D mixed with 2D MHPs composites (termed as the 2D:3D mixed MHPs composites), where 4-fluoro-phenethylammonium, which possesses larger dipole moment compared to phenethylammonium, is used to create 2D MHPs. Systematically studies indicate that the 2D:3D mixed MHPs composites possess larger crystals, higher crystallinity, and enhanced charge transport compared to 3D MHPs thin film. As a result, the PPVs based on the 2D:3D mixed MHPs composites exhibit over 21.16 ± 0.53% power conversion efficiency with suppressed photocurrent hysteresis, over 10 16 cm Hz 1/2W −1 detectivity, and dramatically boosted stability. Our results indicate that we provide a facile way to approach high-performance PPVs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Rational strategies for efficient perovskite solar cells, Accounts10.1021/acs.accounts.5b00444 ↗
2. The rise of highly efficient and stable perovskite solar cells10.1021/acs.accounts.6b00492 ↗
3. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
4. Organometal halide perovskite solar cells: degradation and stability10.1039/C5EE02733K ↗
5. Towards stable and commercially available perovskite solar cells10.1038/nenergy.2016.152 ↗
6. Perovskite solar cell stability in humid air: partially reversible phase transitions in the PbI2-CH3NH3I-H2O system10.1002/aenm.201600846 ↗
7. Ultrahigh carrier mobility achieved in photoresponsive hybrid perovskite films via coupling with single-walled carbon nanotubes10.1002/adma.201702794 ↗
8. Perovskite solar cells based on the synergy between carbon electrodes and polyethylene glycol additive with excellent stability10.1016/j.orgel.2020.105734 ↗
9. Molecular engineered hole‐extraction materials to enable dopant‐free, efficient p‐i‐n perovskite solar cells10.1002/aenm.201700012 ↗
10. Suppressed decomposition of organometal halide perovskites by impermeable electron-extraction layers in inverted solar cells10.1038/ncomms13938 ↗
11. High-efficiency humidity-stable planar perovskite solar cells based on atomic layer architecture10.1039/C6EE02687G ↗
12. An interdiffusion method for highly performing cesium/formamidinium double cation perovskites10.1002/adfm.201700920 ↗
13. Thiocyanate assisted performance enhancement of formamidinium based planar perovskite solar cells through a single one-step solution process10.1039/C6TA02999J ↗
14. Encapsulation of perovskite solar cells for high humidity conditions10.1002/cssc.201600868 ↗
15. Not all that glitters is gold: metal-migration-induced degradation in perovskite solar cells10.1021/acsnano.6b02613 ↗
16. Carbon nanotube/polymer composites as a highly stable hole collection layer in perovskite solar cells10.1021/nl501982b ↗
17. Novel quasi-2D perovskites for stable and efficient perovskite solar cells10.1021/acsami.0c16514 ↗
18. A layered hybrid perovskite solar‐cell absorber with enhanced moisture stability10.1002/ange.201406466 ↗
19. Compositional control in 2d perovskites with alternating cations in the interlayer space for photovoltaics with efficiency over 1810.1002/adma.201903848 ↗
20. Fluorinated low‐dimensional Ruddlesden-Popper perovskite solar cells with over 17% power conversion efficiency and improved stability10.1002/adma.201901673 ↗
21. High-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells10.1038/nature18306 ↗
22. Coordination engineering of single‐crystal precursor for phase control in Ruddlesden–Popper perovskite solar cells
23. Single-crystal MAPbI3 perovskite solar cells exceeding 21% power conversion efficiency10.1021/acsenergylett.9b00847 ↗
24. Self-assembled propylammonium cations at grain boundaries and the film surface to improve the efficiency and stability of perovskite solar cells10.1039/C9TA01755K ↗
25. Stable and efficient perovskite solar cells by discrete two-dimensional perovskites capped on the three-dimensional perovskites bilayer thin film10.1016/j.nanoen.2022.107126 ↗
26. Two-/three-dimensional perovskite bilayer thin films post-treated with solvent vapor for high-performance perovskite photovoltaics10.1021/acsami.1c15735 ↗
27. Gradient 2D/3D perovskite films prepared by hot‐casting for sensitive photodetectors10.1002/advs.202000776 ↗
28. Solution‐grown large‐sized single‐crystalline 2D/3D perovskite heterostructure for self‐powered photodetection10.1002/adom.202000311 ↗
29. Halogenated materials as organic semiconductors10.1021/cm102182x ↗
30. Fluorinated low-dimensional Ruddlesden–Popper perovskite solar cells with over 17% power conversion efficiency and improved stability10.1002/adma.201901673 ↗
31. Efficient perovskite solar cells by hybrid perovskites incorporated with heterovalent neodymium cations10.1016/j.nanoen.2019.04.073 ↗
32. The dedicated high-resolution grazing-incidence X-ray scattering beamline 8-ID-E at the Advanced Photon Source, J. Synchrotron
33. Generation of coherent optical phonons in methylammonium lead iodide thin films10.1021/acs.jpcc.8b03529 ↗
34. Advancing 2D perovskites for efficient and stable solar cells: challenges and opportunities
35. Perovskite quantum dot solar cells with 15.6% efficiency and improved stability enabled by an α-CsPbI3/FAPbI3 bilayer structure10.1021/acsenergylett.9b01920 ↗
36. Red-emitting CsPbBrI2/PbSe heterojunction nanocrystals with high luminescent efficiency and stability for bright light-emitting diodes10.1016/j.nanoen.2019.104142 ↗
37. Light-induced lattice expansion leads to high-efficiency perovskite solar cells10.1126/science.aap8671 ↗
38. High-performance perovskite solar cells by one-step self-assembled perovskite-polymer thin films10.1021/acsaem.0c00823 ↗
39. Parameters affecting I–V hysteresis of CH3NH3PbI3 perovskite solar cells: effects of perovskite crystal size and mesoporous TiO2 layer10.1021/jz501392m ↗
40. Role of surface recombination in perovskite solar cells at the interface of HTL/CH3NH3PbI310.1016/j.nanoen.2019.104186 ↗
41. Modeling anomalous hysteresis in perovskite solar cells10.1021/acs.jpclett.5b01645 ↗
42. Transient photocurrent response of small-molecule bulk heterojunction solar cells10.1002/adma.201305160 ↗
43. High performance perovskites solar cells by hybrid perovskites co-crystallized with poly(ethylene oxide)10.1016/j.nanoen.2019.104229 ↗
44. Novel quasi-2D perovskites for stable and efficient perovskite solar cells10.1021/acsami.0c16514 ↗
45. Layer-edge device of two-dimensional hybrid perovskites10.1038/s41467-018-07656-2 ↗
46. Theory of space-charge-limited current enhanced by Frenkel effect10.1088/0022-3727/3/2/308 ↗
47. Schottky solar cells based on colloidal nanocrystal films10.1021/nl802476m ↗
48. Trap density determination by space‐charge‐limited currents10.1063/1.1728818 ↗
49. On the question of the need for a built-in potential in perovskite solar cells10.1002/admi.202000041 ↗
50. General working principles of CH3NH3PbX3 perovskite solar cells10.1021/nl404252e ↗
51. Two-dimensional Ruddlesden–Popper perovskite with nanorod-like morphology for solar cells with efficiency exceeding 1510.1021/jacs.8b04604 ↗
52. Stabilizing the efficiency beyond 20% with a mixed cation perovskite solar cell fabricated in ambient air under controlled humidity10.1002/aenm.201700677 ↗
53. Sze · 2021
54. Solution-processed ternary perovskite-organic broadband photodetectors with ultrahigh detectivity10.1021/acsami.2c00858 ↗
55. Origin of the dark-current ideality factor in polymer: fullerene bulk heterojunction solar cells10.1063/1.3651752 ↗
56. Jha · 2000
57. Organic photoresponse materials and devices10.1039/C1CS15205J ↗
58. High-detectivity polymer photodetectors with spectral response from 300 nm to 1450 nm10.1126/science.1176706 ↗