Study of molybdenum oxide optimized hole carrier transport in perovskite solar cells
Source abstract
Abstract
Organic/inorganic perovskite solar cells have dramatically improved in efficiency in recent years and have a trend to be comparable to silicon solar cells, its simple process is expected to become an alternative to silicon solar cells in the future. However, in perovskite solar cells, the ineffective carrier extraction leads to non-radiative recombination of some carriers during the diffusion from the perovskite layer to other transport layers, which is a cause of cell efficiency loss. This paper describes the introduction of solid particles of molybdenum oxide of a certain particle size dispersed between the perovskite layer/hole transport layer to improve the extraction of hole carriers, resulting in an improved device short-circuit current density. We further investigated the dependence of the comprehensive performance of the molybdenum oxide incorporated perovskite solar cell on the amount of molybdenum oxide introduced, and the current density-voltage results showed that the optimal content of molybdenum oxide was 0.5 mg/ml, and the efficiency of the perovskite solar cell at this content was 18.27% with a short-circuit current density of 23.67 m A · c m − 2 , while the efficiency of the device without molybdenum oxide was 16.97% with a short-circuit current density of 21.84 m A · c m − 2 . Therefore, this work provides an effective way to improve the efficiency of perovskite solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. The origin of high efficiency in low-temperature solution-processable bilayer organometal halide hybrid solar cells10.1039/C3EE43161D ↗
2. Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance10.1126/science.aah5557 ↗
3. Efficient, stable solar cells by using inherent bandgap of α-phase formamidinium lead iodide10.1038/s41586-021-03964-8 ↗
4. Study of black phosphorus quantum dot modified SnO2-based perovskite solar cells10.1063/5.0081718 ↗
5. Improved charge extraction and atmospheric stability of all-inorganic Cs2AgBiBr6 perovskite solar cells by MoS2 nanoflakes10.1016/j.solmat.2022.111932 ↗
6. Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells10.1038/s41586-021-03406-5 ↗
7. J. Am. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
8. Recent advances in the inverted planar structure of perovskite solar cells10.1021/acs.accounts.5b00404 ↗
9. Unintentional passivation of 4-tertbutyl pyridine for improved efficiency and decreased operational stability of perovskite solar cells10.1063/5.0051527 ↗
10. Bulk heterojunction perovskite-PCBM solar cells with high fill factor10.1038/nphoton.2016.3 ↗
11. Thermally stable MAPbI3 perovskite solar cells with efficiency of 19.19% and area over 1 cm2 achieved by additive engineering10.1002/adma.201701073 ↗
12. SrCl2 derived perovskite facilitating a high efficiency of 16% in hole-conductor-free fully printable mesoscopic perovskite solar cells
13. Chemical reduction of intrinsic defects in thicker heterojunction planar perovskite solar cells
14. A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells10.1038/s41560-018-0200-6 ↗
15. A hole-transport material that also passivates perovskite surface defects for solar cells with improved efficiency and stability10.1039/D0EE01655A ↗
16. Stable perovskite solar cells with efficiency exceeding 24.8% and 0.3-V voltage loss10.1126/science.abb7167 ↗
17. Dopant-Free Organi8c hole-transporting material for efficient and stable inverted all-inorganic and hybrid perovskite solar cells10.1002/adma.201908011 ↗
18. Low-cost dopant additive-free hole-transporting material for a robust perovskite solar cell with efficiency exceeding 2110.1021/acsenergylett.0c02210 ↗
19. Enhanced electron extraction using SnO2 for high-efficiency planar-structure HC(NH2)2PbI3-based perovskite solar cells10.1038/nenergy.2016.177 ↗
20. Perovskite solar cells with 18.21% efficiency and area over 1 cm2 fabricated by heterojunction engineering10.1038/nenergy.2016.148 ↗
21. Overcoming the interface losses in planar heterojunction perovskite-based solar cells10.1002/adma.201504168 ↗
22. Recombination in perovskite solar cells: significance of grain boundaries, interface traps, and defect ions10.1021/acsenergylett.7b00236 ↗
23. Efficient and stable chemical passivation on perovskite surface via bidentate anchoring
24. High-performance and environmentally stable planar heterojunction perovskite solar cells based on a solution-processed copper-doped nickel oxide hole-transporting layer10.1002/adma.201404189 ↗
25. Enhanced self-assembled monolayer surface coverage by ALD NiO in p-i-n perovskite solar cells10.1021/acsami.1c15860 ↗
26. Cobalt oxide (CoOx) as an efficient hole-extracting layer for high-performance inverted planar perovskite solar cells10.1021/acsami.6b10803 ↗
27. Solution-processed molybdenum oxide with hydroxyl radical-induced oxygen vacancy as an efficient and stable interfacial layer for organic solar cells10.1002/solr.201900420 ↗
28. Nanowire CdS-CdTe solar cells with molybdenum oxide as contact10.1038/srep14859 ↗
29. Enhanced extraction rates through gap states of molybdenum oxide anode buffer10.1021/jp3114013 ↗
30. Solution processed metaloxides for organic electronic devices10.1039/c3tc30930d ↗
31. Role of the deep-lying electronic states of MoO3 in the enhancement of hole-injection in organic thin films10.1063/1.3231928 ↗
32. Metal-free efficient photocatalyst for stable visible water splitting via a two-electron pathway10.1126/science.aaa3145 ↗
33. Molybdenum oxide/tungsten oxide nano-heterojunction with improved surface-enhanced Raman scattering performance10.1021/acsami.1c03848 ↗
34. Sze · 1981