journal article·2021-08

Ambipolar carrier transport properties of triphenylamine/dibenzofulvene derivative and its application for efficient n-i-p perovskite solar cells

Hsin-Chang Lin, Li-Yin Chen, Chang-Chia Lu, Jai-You Lai, Yung-Chung Chen, Yung-Jr Hung

Publisher page

Abstract

Abstract Herein, the carrier transport properties of 9-(4-(diphenylamino)benzylidene)-N′,N′,N′,N′-tetraphenyl-9H-fluorene-2,7-diamine (YC-1) was firstly investigated with time-of-flight method. YC-1 exhibited ambipolar conductive behaviour, with hole and electron mobilities up to 10−4 cm2(Vs)−1. We introduced YC-1 as a hole transporting layer (HTL) in a planar n-i-p perovskite solar cell. A device fabricated using YC-1 exhibited enhanced performance compared to the device fabricated using P3HT, demonstrating 14.91% power conversion efficiency (PCE) and low hysteresis with a hysteresis effect index (HEI) of 0.007. A comprehensive analysis of the J-V characteristics in hole-only devices revealed the improvement of the YC-1 based devices were mainly contributed to the higher conductivity and lower trap density, which were beneficial to the device performance. This work suggests the thermally evaporable triphenylamine/dibenzofulvene can be a good candidate for HTL of conventional perovskite solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Organic Electronics and Photovoltaics · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Perovskite solar cells: an emerging photovoltaic technology10.1016/j.mattod.2014.07.007 ↗
2. Tunable bandgap in hybrid perovskite CH3NH3Pb(Br3−yXy) single crystals and photodetector applications
3. Excited state properties of hybrid perovskites10.1021/acs.accounts.5b00445 ↗
4. Understanding the transport mechanism of organic-inorganic perovskite solar cells: the effect of exciton or free-charge on diffusion length10.1016/j.orgel.2018.12.007 ↗
5. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
6. Stable perovskite solar cells with efficiency exceeding 24.8% and 0.3-V voltage loss10.1126/science.abb7167 ↗
7. High efficiency inverted planar perovskite solar cells with solution-processed NiOx hole contact10.1021/acsami.6b13372 ↗
8. Analysis of the efficiency losses in hybrid perovskite/PTAA solar cells with different molecular weights: morphology versus kinetics10.1021/acsaem.0c00956 ↗
9. Novel efficient C60-based inverted perovskite solar cells with negligible hysteresis10.1016/j.electacta.2018.09.004 ↗
10. Efficient and stable inverted planar perovskite solar cells using dopant-free CuPc as hole transport layer10.1016/j.electacta.2018.04.055 ↗
11. Acid additives enhancing the conductivity of spiro-OMeTAD toward high-efficiency and hysteresis-less planar perovskite solar cells
12. Carbazole-terminated isomeric hole-transporting materials for perovskite solar cells10.1021/acsami.9b23495 ↗
13. Enhanced performance of perovskite solar cells with P3HT hole-transporting materials via molecular p-type doping10.1039/C6RA21775C ↗
14. Efficient and stable mixed perovskite solar cells using P3HT as a hole transporting layer10.1039/C8TC01345D ↗
15. p-Doping of a hole transport material via a poly(ionic liquid) for over 20% efficiency and hysteresis-free perovskite solar cells10.1021/acsaem.9b01819 ↗
16. Enhancement in the efficiency of an organic–inorganic hybrid solar cell with a doped P3HT hole-transporting layer on a void-free perovskite active layer10.1039/C4TA02976C ↗
17. Doping strategies for small molecule organic hole-transport materials: impacts on perovskite solar cell performance and stability10.1039/C8SC05284K ↗
18. Triphenylamine dibenzofulvene–derived dopant-free hole transporting layer induces micrometer-sized perovskite grains for highly efficient near 20% for p-i-n perovskite solar cells10.1002/pip.3205 ↗
19. Universal passivation strategy to slot-die printed SnO2 for hysteresis-free efficient flexible perovskite solar module10.1038/s41467-018-07099-9 ↗
20. Annealing-free perovskite films by instant crystallization for efficient solar cells10.1039/C6TA02490D ↗
21. Drift mobilities in amorphous charge‐transfer complexes of trinitrofluorenone and poly‐n‐vinylcarbazole10.1063/1.1661065 ↗
22. Comparison of charge transport models in molecularly doped polymers10.1080/13642819208204920 ↗
23. Charge transport in disordered organic photoconductors a Monte Carlo simulation study10.1002/pssb.2221750102 ↗
24. Determination of carrier mobility in disordered organics from current-voltage characteristics10.1063/1.3184565 ↗
25. Gradated mixed hole transport layer in a perovskite solar cell: improving moisture stability and efficiency10.1021/acsami.7b07071 ↗
26. High hole mobility hole transport material for organic light-emitting devices10.1016/j.synthmet.2013.07.021 ↗
27. Study of field effect mobility in PCBM films and P3HT:PCBM blends10.1016/j.solmat.2004.06.014 ↗
28. Charge carrier mobility of the organic photovoltaic materials PTB7 and PC71BM and its influence on device performance10.1016/j.orgel.2015.03.013 ↗
29. Charge injection, carriers recombination and HOMO energy level relationship in perovskite solar cells10.1038/s41598-017-06245-5 ↗
30. Hysteresis index: a figure without merit for quantifying hysteresis in perovskite solar cells10.1021/acsenergylett.8b01627 ↗
31. The interplay between trap density and hysteresis in planar heterojunction perovskite solar cells10.1021/acs.nanolett.7b01211 ↗
32. Improving hysteresis of room-temperature air-quenching MAPbI3-xClx solar cells by using mixed-lead halide precursor10.1016/j.matchemphys.2020.124032 ↗
33. A new polytriarylamine derivative for dopant-free high-efficiency perovskite solar cells10.1039/C9SE00448C ↗
34. Influence of hole transport layers on internal absorption, charge recombination and collection in HC(NH2)2PbI3 perovskite solar cells10.1039/C8TA01617H ↗
35. Light absorption of poly(3-hexylthiophene) single crystals10.1039/C3RA47064D ↗
36. Benefits of fullerene/SnO2 bilayers as electron transport layer for efficient planar perovskite solar cells10.1016/j.orgel.2018.03.041 ↗
37. Formamidinium lead halide perovskite crystals with unprecedented long carrier dynamics and diffusion length10.1021/acsenergylett.6b00002 ↗
38. Deciphering the effect of traps on electronic charge transport properties of methylammonium lead tribromide perovskite10.1126/sciadv.abb6393 ↗
39. Trap-assisted non-radiative recombination in organic–inorganic perovskite solar cells10.1002/adma.201405372 ↗
40. Electronic traps and their correlations to perovskite solar cell performance via compositional and thermal annealing controls10.1021/acsami.8b17431 ↗
41. It's a trap! on the nature of localised states and charge trapping in lead halide perovskites10.1039/C9MH00500E ↗
42. Causes and solutions of recombination in perovskite solar cells