Fluorinated Benzothiadiazole-based polymers with chalcogenophenes for organic field-effect transistors
Source abstract
Abstract
The effect of incorporating chalcogenophene comonomers, namely, furan, thiophene, and selenophene, on the optoelectrical properties of cyclopentadithiophene-based polymers (P1, P2, and P3, respectively) for organic field-effect transistors is reported. The optical, electrical, and morphological properties of the P1, P2, and P3 are investigated. Compared to the other polymers, the P2 showed the highest crystallinity with the shortest π–π stacking distance ( d π–π ≈ 3.58 Å) and the longest crystalline length ( L c ≈ 40 Å), as confirmed by two-dimensional grazing incidence wide-angle X-ray diffraction. However, P3 had the highest hole mobility ( μ = 0.25 cm 2/V-s), which is higher than P1 ( μ = 0.06 cm 2/V-s) and P2 ( μ = 0.20 cm 2 /V-s). The relatively lower mobility of the P2 compared to that of the P3 is attributed to its island-like crystalline domains, confirmed by atomic force microscopy results and the lower edge-on crystallite ratio. Our findings suggest a new design guideline for developing high-mobility π-conjugated polymers.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Interface engineering in organic field-effect transistors: principles, applications, and perspectives10.1021/acs.chemrev.9b00532 ↗
2. Flexible field-effect transistor-type sensors based on conjugated molecules10.1016/j.chempr.2017.10.005 ↗
3. Material and device considerations for organic thin-film transistor sensors10.1039/b816386c ↗
4. Organic field effect transistors (OFETs) in environmental sensing and health monitoring: a review10.1016/j.trac.2018.11.027 ↗
5. Insight into high-performance conjugated polymers for organic field-effect transistors10.1016/j.chempr.2018.08.005 ↗
6. An asymmetric molecular design strategy for organic field-effect transistors with high consistency of performance10.1021/acsaelm.9b00203 ↗
7. Recent advances in organic transistor printing processes10.1021/am302796z ↗
8. 25th anniversary article: organic field-effect transistors: the path beyond amorphous silicon10.1002/adma.201304346 ↗
9. Blade coating aligned, high-performance, semiconducting-polymer transistors10.1021/acs.chemmater.7b04835 ↗
10. Superexchange induced charge transport in organic donor–acceptor cocrystals and copolymers: a theoretical perspective10.1021/acs.chemmater.9b01545 ↗
11. Impact of chemical design on the molecular orientation of conjugated donor–acceptor polymers for field-effect transistors10.1021/acsapm.1c01676 ↗
12. Benzothiadiazole and its π-extended, heteroannulated derivatives: useful acceptor building blocks for high-performance donor–acceptor polymers in organic electronics10.1039/C6TC01860B ↗
13. Recent progress on organic donor–acceptor complexes as active elements in organic field-effect transistors10.1039/C7TC04389A ↗
14. Thieno[3,2-b]pyrrole-benzothiadiazole banana-shaped small molecules for organic field-effect transistors10.1021/acsami.8b01113 ↗
15. Alkylated selenophene-based ladder-type monomers via a facile route for high-performance thin-film transistor applications10.1021/jacs.7b03099 ↗
16. Synergistic effects of fluorination and alkylthiolation on the photovoltaic performance of the poly(benzodithiophene-benzothiadiazole) copolymers10.1021/acsaem.8b00819 ↗
17. Heteroannulated acceptors based on benzothiadiazole10.1039/C4MH00102H ↗
18. Mobility exceeding 10 cm2/(V·s) in donor–acceptor polymer transistors with band-like charge transport10.1021/acs.chemmater.5b04567 ↗
19. Field-effect transistors based on a Benzothiadiazole−Cyclopentadithiophene copolymer10.1021/ja0683537 ↗
20. Fused dithienopicenocarbazole enabling high mobility dopant-free hole-transporting polymers for efficient and stable perovskite solar cells10.1021/acsami.0c21729 ↗
21. Fused ring cyclopentadithienothiophenes as novel building blocks for high field effect mobility conjugated polymers10.1021/acs.macromol.5b01278 ↗
22. Disentangling the impact of side chains and fluorine substituents of conjugated donor polymers on the performance of photovoltaic blends10.1039/C2EE23235A ↗
23. Benzotriazole-Containing planar conjugated polymers with noncovalent conformational locks for thermally stable and efficient polymer field-effect transistors10.1021/cm4042346 ↗
24. Thiophene–tetrafluorophenyl–thiophene: a promising building block for ambipolar organic field effect transistors10.1039/C4TC02540G ↗
25. Fluorine substitution influence on benzo[2,1,3]thiadiazole based polymers for field-effect transistor applications10.1039/C5CC10009G ↗
26. Electronic properties and photovoltaic performances of a series of oligothiophene copolymers incorporating both thieno[3,2-b]thiophene and 2,1,3-benzothiadiazole moieties, macromol10.1002/marc.200900804 ↗
27. A [3,2-b]thienothiophene-alt-benzothiadiazole copolymer for photovoltaic applications: design, synthesis, material characterization and device performances10.1039/b819177h ↗
28. A low band gap co-polymer of dithienogermole and 2,1,3-benzothiadiazole by Suzuki polycondensation and its application in transistor and photovoltaic cells10.1039/c1jm13628c ↗
29. Novel conjugated polymers containing 3-(2-Octyldodecyl)thieno[3,2-b]thiophene as a π-bridge for organic photovoltaic applications10.3390/polym12092121 ↗
30. Dithienosilole-benzothiadiazole-based ternary copolymers with a D1–A–D2–A structure for polymer solar cells10.1039/C5PY00201J ↗
31. Amorphous thieno[3,2-b]thiophene and benzothiadiazole based copolymers for organic photovoltaics10.1021/am5061189 ↗
32. Cyclopentadithiophene–Benzothiadiazole donor–acceptor polymers as prototypical semiconductors for high-performance field-effect transistors10.1021/acs.accounts.8b00025 ↗
33. Effect of spacer insertion in a commonly used dithienosilole/benzothiadiazole-based low band gap copolymer for polymer solar cells10.1016/j.eurpolymj.2013.09.025 ↗
34. Synthesis and photovoltaic properties of a poly(2,7-carbazole) derivative based on dithienosilole and benzothiadiazole10.1002/macp.201100060 ↗
35. Fabrication of alternating copolymers based on cyclopentadithiophene-benzothiadiazole dicarboxylic imide with reduced optical band gap: synthesis, optical, electrochemical, thermal, and structural properties
36. Development of spiro[cyclopenta[1,2-b:5,4-b′]dithiophene-4,9′-fluorene]-based A-π-D-π-A small molecules with different acceptor units for efficient organic solar cells10.1021/acsami.6b14114 ↗
37. Synthesis, characterization, optical and electrochemical properties of cyclopentadithiophene and fluorene based conjugated polymers containing naphthalene bisimide10.1016/j.dyepig.2014.03.001 ↗
38. An ultrahigh mobility in isomorphic fluorobenzo[c][1,2,5]thiadiazole-based polymers10.1002/anie.201808098 ↗
39. Chalcogenophene comonomer comparison in small band gap diketopyrrolopyrrole-based conjugated polymers for high-performing field-effect transistors and organic solar cells10.1021/ja511984q ↗
40. Synthesis and electrochemical polymerization of dithienosilole-based monomers bearing different donor units10.1149/2.0521606jes ↗
41. The effect of different chalcogenophenes in isoindigo-based conjugated copolymers on photovoltaic properties10.1039/C4PY00791C ↗
42. Diazapentalene-Containing ultralow-band-gap copolymers for high-performance near-infrared organic phototransistors10.1021/acs.chemmater.1c02409 ↗
43. Synthesis and characterization of low-bandgap cyclopentadithiophene-biselenophene copolymer and its use in field-effect transistor and polymer solar cells10.1002/pola.23726 ↗
44. Furan-flanked diketopyrrolopyrrole-based chalcogenophene copolymers with siloxane hybrid side chains for organic field-effect transistors10.1039/C9PY00448C ↗
45. Grazing incidence wide angle x-ray scattering at the wiggler beamline BW4 of HASYLAB10.1063/1.3488459 ↗
46. Effect of chalcogen atom substitution on the optoelectronic properties in cyclopentadithiophene polymers10.1021/ma5014308 ↗
47. Synthesis and characterization of benzodithiophene–chalcogenophene based copolymers: a comparative study of optoelectronic properties and photovoltaic applications10.1002/macp.201700038 ↗
48. Difluorobenzothiadiazole-based small-molecule organic solar cells with 8.7% efficiency by tuning of π-conjugated spacers and solvent vapor annealing10.1002/adfm.201505020 ↗
49. Dithienosilole-co-5-fluoro-2,1,3-benzothiadiazole-containing regioisomeric polymers for organic field-effect transistors10.1039/C9TC02414J ↗
50. Tuning the charge carrier polarity of organic transistors by varying the electron affinity of the flanked units in diketopyrrolopyrrole-based copolymers
51. Determining optimal crystallinity of diketopyrrolopyrrole-based terpolymers for highly efficient polymer solar cells and transistors10.1021/cm502991d ↗
52. Synthesis of π-extended dithienobenzodithiophene-containing medium bandgap copolymers and their photovoltaic application10.1080/10601325.2015.1080103 ↗
53. Incorporation of furan into low band-gap polymers for efficient solar cells10.1021/ja108115y ↗
54. Regioregular pyridal[2,1,3]thiadiazole π-conjugated copolymers10.1021/ja207543g ↗
55. Increased open circuit voltage in fluorinated benzothiadiazole-based alternating conjugated polymers10.1039/c1cc14586j ↗
56. Regioregular, yet ductile and amorphous indacenodithiophene-based polymers with high-mobility for stretchable plastic transistors10.1039/D1TC01984H ↗
57. Significant improved performance of photovoltaic cells made from a partially fluorinated cyclopentadithiophene/benzothiadiazole conjugated polymer10.1021/ma3009178 ↗
58. Synthesis of the axially substituted titanium pc-C60 dyad with a convenient method10.1021/ol050281l ↗
59. Fluorinated benzothiadiazole (BT) groups as a powerful unit for high-performance electron-transporting polymers10.1021/am505925w ↗
60. Quantitative determination of organic semiconductor microstructure from the molecular to device scale10.1021/cr3001109 ↗
61. Direct observation of confinement effects of semiconducting polymers in polymer blend electronic systems10.1002/advs.202100332 ↗
62. Effect of bulky atom substitution on backbone coplanarity and electrical properties of cyclopentadithiophene-based semiconducting polymers10.1002/marc.202270010 ↗
63. Enhanced solid-state order and field-effect hole mobility through control of nanoscale polymer aggregation10.1021/ja4088665 ↗
64. Enhancement of field-effect mobility due to surface-mediated molecular ordering in regioregular polythiophene thin film transistors10.1002/adfm.200400054 ↗
65. Highly π-extended copolymers with diketopyrrolopyrrole moieties for high-performance field-effect transistors10.1002/adma.201201318 ↗
66. Synergistic effect of the selenophene-containing central core and the regioisomeric monochlorinated terminals on the molecular packing, crystallinity, film morphology, and photovoltaic performance of selenophene-based nonfullerene acceptors10.1039/D0TC05261B ↗