journal article·2015-02

Vacuum deposited ternary mixture organic solar cells

Graeme Williams, Hany Aziz

Publisher page

Abstract

Abstract Ternary mixtures of photo-active organic materials are an intuitive approach to achieve enhanced photocurrent in organic solar cells (OSCs). In this work, we study ternary mixtures of vacuum deposited small molecules, complementing the recent surge of interest in solution processed ternary OSCs. The mixed layer composition is systematically varied to study all possible film configurations, and the resulting OSCs are successful in harvesting photocurrent from all three components to grant broad spectral photoresponse. However, the performance of the ternary OSC is generally less than the binary OSC, largely due to reduced fill factors. By examining ternary OSC transient photocurrents and multi-donor planar heterojunction devices, we demonstrate that the ternary OSC is strongly affected by the energy levels of its constituent materials, with small differences in the two donor materials’ highest occupied molecular orbitals degrading hole transport. The results stress the importance of fine molecular engineering for ternary OSCs, and further hint that the enhancements commonly observed in solution processed ternary OSCs may in part be associated with morphological variations that are not present in vacuum deposited OSCs. The research verifies that, by designing small molecules with specific energy levels, ternary OSCs provide an alternative pathway to low cost, high efficiency photovoltaics in lieu of more complicated device architectures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
2. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
3. High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6,6)C-61 blends10.1063/1.2006986 ↗
4. Linear side chains in Benzo[1,2-b:4,5-b′]dithiophene–thieno[3,4-c]pyrrole-4,6-dione polymers direct self-assembly and solar cell performance10.1021/ja400365b ↗
5. Development of large band-gap conjugated copolymers for efficient regular single and tandem organic solar cells10.1021/ja406220a ↗
6. Semi-crystalline photovoltaic polymers with efficiency exceeding 9% in a ∼300nm thick conventional single-cell device10.1039/C4EE01529K ↗
7. Improved bulk heterojunction organic solar cells employing C70 fullerenes10.1063/1.3148664 ↗
8. Efficient Methano[70]fullerene/MDMO-PPV bulk heterojunction photovoltaic cells10.1002/anie.200351647 ↗
9. Effects of C 70 derivative in low band gap polymer photovoltaic devices: spectral complementation and morphology optimization10.1063/1.2361082 ↗
10. Boron subphthalocyanine chloride as an electron acceptor for high-voltage fullerene-free organic photovoltaics10.1002/adfm.201101782 ↗
11. Polymer solar cells with diketopyrrolopyrrole conjugated polymers as the electron donor and electron acceptor10.1002/adma.201305910 ↗
12. Fullerene-free organic solar cells with an efficiency of 3.7% based on a low-cost geometrically planar perylene diimide monomer10.1039/C4TA02851A ↗
13. Low-bandgap donor/acceptor polymer blend solar cells with efficiency exceeding 4%10.1002/aenm.201301006 ↗
14. Heliatek, Heliatek consolidates its technology leadership by establishing a new world record for organic solar technology with a cell efficiency of 12%, Heliatek Press.
15. Solar cell efficiency tables (version 41)
16. An efficient triple-junction polymer solar cell having a power conversion efficiency exceeding 11%10.1002/adma.201402072 ↗
17. Organic ternary solar cells: a review10.1002/adma.201300623 ↗
18. Understanding and improving solid-state Polymer/C-60-fullerene bulk-heterojunction solar cells using ternary porphyrin blends10.1021/jp0748664 ↗
19. A ternary cascade structure enhances the efficiency of polymer solar cells10.1039/b918362k ↗
20. Structure in ternary blend systems for organic photovoltaics10.1016/j.synthmet.2011.07.013 ↗
21. Toward the realization of a practical diketopyrrolopyrrole-based small molecule for improved efficiency in ternary BHJ solar cells10.1002/marc.201100643 ↗
22. Evolution of phase separation upon annealing and the influence on photocurrent generation in ternary blend organic solar cells10.1016/j.synthmet.2013.12.024 ↗
23. Ternary bulk heterojunction solar cells: addition of soluble NIR dyes for photocurrent generation beyond 800nm10.1021/am5007172 ↗
24. A squaraine dye as molecular sensitizer for increasing light harvesting in polymer solar cells10.1016/j.synthmet.2014.02.018 ↗
25. Influence of polymer compatibility on the open-circuit voltage in ternary blend bulk heterojunction solar cells10.1021/am502122a ↗
26. Two similar near-infrared (IR) absorbing benzannulated aza-BODIPY dyes as near-IR sensitizers for ternary solar cells10.1021/am400923b ↗
27. Distinct annealing temperature in polymer:fullerene:polymer ternary blend solar cells10.1021/jp809589n ↗
28. Efficient ternary blend bulk heterojunction solar cells with tunable open-circuit voltage10.1021/ja205977z ↗
29. Efficient ternary blend polymer solar cells with indene-C 60 bisadduct as an electron-cascade acceptor10.1039/c3ee44202k ↗
30. Origin of the tunable open-circuit voltage in ternary blend bulk heterojunction organic solar cells10.1021/ja3112143 ↗
31. Highly efficient and stable white organic light emitting diode with triply doped structure10.1016/j.displa.2006.05.002 ↗
32. Harvesting excitons via two parallel channels for efficient white organic LEDs with nearly 100% internal quantum efficiency: fabrication and emission-mechanism analysis10.1002/adfm.200800918 ↗
33. Rational design of ternary-phase polymer solar cells by controlling polymer phase separation10.1021/jp4108188 ↗
34. Guiding the selection of processing additives for increasing the efficiency of bulk heterojunction polymeric solar cells10.1002/aenm.201300752 ↗
35. Solvent additives and their effects on blend morphologies of bulk heterojunctions10.1039/C0JM01976C ↗
36. Processing additives for improved efficiency from bulk heterojunction solar cells10.1021/ja710079w ↗
37. Efficient bulk heterojunction photovoltaic cells using small-molecular-weight organic thin films10.1038/nature01949 ↗
38. Influence of codeposition on the performance of CuPc–C60 heterojunction photovoltaic devices10.1063/1.1643549 ↗
39. Efficient, bulk heterojunction organic photovoltaic cells based on boron subphthalocyanine chloride-C-7010.1063/1.4737902 ↗
40. Efficient organic photovoltaic cells based on nanocrystalline mixtures of boron subphthalocyanine chloride and C6010.1002/adfm.201101948 ↗
41. Enhanced open-circuit voltage in subphthalocyanine/C60 organic photovoltaic cells10.1021/ja061655o ↗
42. Electro-optical study of subphthalocyanine in a bilayer organic solar cell10.1002/adfm.200700398 ↗
43. Role of the donor material and the donor–acceptor mixing ratio in increasing the efficiency of Schottky junction organic solar cells10.1016/j.orgel.2013.06.001 ↗
44. Renewed interest in metal phthalocyanine donors for small molecule organic solar cells10.1016/j.solmat.2014.02.013 ↗
45. Implications of the device structure on the photo-stability of organic solar cells10.1016/j.solmat.2014.05.044 ↗
46. Organic solar cells beyond one pair of donor–acceptor: ternary blends and more10.1021/jz400723u ↗
47. Interplay between efficiency and device architecture for small molecule organic solar cells10.1039/c4cp01295j ↗
48. Bulk heterojunction photovoltaic cells with low donor concentration10.1002/adma.201102173 ↗
49. Organic Schottky barrier photovoltaic cells based on MoOx C6010.1063/1.3415497 ↗
50. Cascade organic solar cells10.1021/cm200525h ↗
51. Exciton management in organic photovoltaic multi-donor energy cascades10.1021/nl501112z ↗
52. Charge accumulation induced S-shape J–V curves in bilayer heterojunction organic solar cells10.1016/j.orgel.2011.02.016 ↗
53. Investigation of driving forces for charge extraction in organic solar cells: transient photocurrent measurements on solar cells showing s-shaped current-voltage characteristics10.1002/aenm.201200931 ↗
54. Assessing the origin of the S-shaped I–V curve in organic solar cells: an improved equivalent circuit model10.1016/j.solmat.2013.11.018 ↗
55. Highly efficient bifacial transparent organic solar cells with power conversion efficiency greater than 3% and transparency of 50%10.1016/j.orgel.2012.05.029 ↗
56. A low-energy-gap organic dye for high-performance small-molecule organic solar cells10.1021/ja205126t ↗
57. Drift-diffusion modeling of photocurrent transients in bulk heterojunction solar cells10.1063/1.3247547 ↗
58. Linking vertical bulk-heterojunction composition and transient photocurrent dynamics in organic solar cells with solution-processed MoOx contact layers