Guanidine carbonate modified TiO2/Perovskite interface for efficient and stable planar perovskite solar cells
Source abstract
Abstract
The rational design and modification of the buried interface are essential and challenging for high-performance perovskite solar cells (PSCs). TiO 2 is a simple and readily available electron transport layer material, but its surface defects and poor interfacial contact with perovskite layers hinder its widespread application. Here, we propose an effective TiO 2/perovskite interface modification strategy by introducing simple guanidine carbonate (GuaCO 3) onto the surface of TiO 2. Guanidine carbonate can improve the interfacial contact between TiO 2 and perovskite, reduce non-radiative recombination, and enhance carrier extraction. Moreover, the PbI 2 film grown on the TiO 2/GuaCO 3 substrate tended to become porous during the preparation of perovskite films by the traditional two-step method, which facilitated the complete reaction of organic ammonium salts with PbI 2 and promoted the growth of high-quality perovskite films. The experimental results indicate that GuaCO 3 can passivate the interfacial defects of TiO 2/perovskite, as well as reduce the accumulation of interfacial charges. The device modified with GuaCO 3 achieved a power conversion efficiency (PCE) of 23.39 %, which is significantly higher than that of the control device (21.73 %). After storage in an ambient environment at room temperature for 600 h, the unencapsulated device modified with GuaCO 3 retained 78 % of its initial efficiency, while the control device retained only 57 % of its initial efficiency. These results indicate that interfacial modification with GuaCO 3 is an effective strategy for improving the performance of PSCs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Methylammonium-free, high-performance, and stable perovskite solar cells on a planar architecture10.1126/science.aat3583 ↗
2. Surface-reconstruction of NiOX nanocrystals makes a breakthrough in flexible solar cells10.1016/j.joule.2022.07.006 ↗
3. Compositional engineering of perovskite materials for high-performance solar cells10.1038/nature14133 ↗
4. Inactive (PbI2)2RbCl stabilizes perovskite films for efficient solar cells10.1126/science.abp8873 ↗
5. Research direction toward theoretical efficiency in perovskite solar cells10.1021/acsphotonics.8b00124 ↗
6. Imperfections and their passivation in halide perovskite solar cells10.1039/C8CS00853A ↗
7. An atomistic mechanism for the degradation of perovskite solar cells by trapped charge10.1039/C9NR02193K ↗
8. Stable high-performance perovskite solar cells via grain boundary passivation10.1002/adma.201706576 ↗
9. Interface passivation using ultrathin polymer–fullerene films for high-efficiency perovskite solar cells with negligible hysteresis10.1039/C7EE01096F ↗
10. Constructive molecular configurations for surface-defect passivation of perovskite photovoltaics10.1126/science.aay9698 ↗
11. Cu-doped nickel oxide hole transporting layer via efficient low-temperature spraying combustion method for perovskite solar cells10.1007/s10854-019-01942-5 ↗
12. Urbach tail of anatase TiO210.1103/PhysRevB.52.7771 ↗
13. Oriented molecular bridge constructs homogeneous buried interface for perovskite solar cells with efficiency over 25.3
14. Two-stage ultraviolet degradation of perovskite solar cells induced by the oxygen vacancy-Ti4+ states10.1016/j.isci.2020.101013 ↗
15. A TiO2 embedded structure for perovskite solar cells with anomalous grain growth and effective electron extraction10.1039/C6TA10418E ↗
16. Defect-tolerant sodium-based dopant in charge transport layers for highly efficient and stable perovskite solar cells10.1021/acsenergylett.0c00514 ↗
17. Simultaneous contact and grain-boundary passivation in planar perovskite solar cells using SnO2-KCl composite electron transport layer10.1002/aenm.201903083 ↗
18. Enhanced charge collection with passivation layers in perovskite solar cells10.1002/adma.201505140 ↗
19. Sulfate-assisted interfacial engineering for high yield and efficiency of triple cation perovskite solar cells with alkali-doped TiO2 electron-transporting layers10.1002/adfm.201706287 ↗
20. Bridging effects of sulfur anions at titanium oxide and perovskite interfaces on interfacial defect passivation and performance enhancement of perovskite solar cells10.1021/acsomega.1c04685 ↗
21. Improving the performance and stability of perovskite solar cells through buried interface passivation using potassium hydroxide10.1021/acsaem.1c03402 ↗
22. Solution-processed perovskite thin-films: the journey from lab- to large-scale solar cells10.1039/D1EE02018H ↗
23. Solvent engineering of the precursor solution toward large-area production of perovskite solar cells10.1002/adma.202005410 ↗
24. Retarding the crystallization of PbI2 for highly reproducible planar-structured perovskite solar cells via sequential deposition10.1039/C4EE01624F ↗
25. Detrimental effect of unreacted PbI2 on the long-term stability of perovskite solar cells10.1002/adma.201905035 ↗
26. Crystal growth regulation of 2D/3D perovskite films for solar cells with both high efficiency and stability
27. Modulation of nucleation and crystallization in PbI2 films promoting preferential perovskite orientation growth for efficient solar cells10.1039/D2EE03342A ↗
28. Omnidirectional diffusion of organic amine salts assisted by ordered arrays in porous lead iodide for two-step deposited large-area perovskite solar cells10.1039/D2EE03418B ↗
29. Rapid hybrid perovskite film crystallization from solution10.1039/D0CS01272F ↗
30. Highly stable and efficient FASnI3-based perovskite solar cells by introducing hydrogen bonding10.1002/adma.201903721 ↗
31. Buried guanidinium passivator with favorable binding energy for perovskite solar cells10.1021/acsenergylett.2c02881 ↗
32. Passivating SnO2/perovskite interface via guanide hydrochloride toward efficient and stable n-i-p perovskite solar cells10.1016/j.jcis.2023.07.110 ↗
33. High efficiency planar-type perovskite solar cells with negligible hysteresis using EDTA-complexed SnO210.1038/s41467-018-05760-x ↗
34. Hysteresis-free and efficient perovskite solar cells using SnO2 with self-assembly L-cysteine layer
35. Orientated crystallization of FA-based perovskite via hydrogen-bonded polymer network for efficient and stable solar cells10.1038/s41467-023-36224-6 ↗
36. Facet orientation tailoring via 2D-seed- induced growth enables highly efficient and stable perovskite solar cells10.1016/j.joule.2021.12.006 ↗
37. Probing facet-dependent surface defects in MAPbI3 perovskite single crystals10.1021/acs.jpcc.9b00943 ↗
38. Zwitterion-functionalized SnO2 substrate induced sequential deposition of black-phase FAPbI3 with rearranged PbI2 residue10.1002/adma.202203143 ↗
39. Tuning the reactivity of PbI2 film via monolayer Ti3C2Tx MXene for two-step-processed CH3NH3PbI3 solar cells10.1016/j.cej.2020.127912 ↗
40. Porous lead iodide layer promotes organic amine salt diffusion to achieve high performance p-i-n flexible perovskite solar cells10.1002/aenm.202301259 ↗
41. Highly stable and efficient FASnI3-based perovskite solar cells by introducing hydrogen bonding10.1002/adma.201903721 ↗
42. Cesium carbonate modified electron transport layer for improving the photoelectric conversion efficiency of planar perovskite solar cells10.1016/j.mssp.2020.105014 ↗
43. Buried interface passivation strategies for high-performance perovskite solar cells10.1039/D3TA00750B ↗
44. 24.8%-efficient planar perovskite solar cells via ligand-engineered TiO2 deposition10.1016/j.joule.2022.07.004 ↗