New additive as Li+ source for charge transfer improvement at triple-cation perovskite/Spiro-OMeTAD interface
Source abstract
Abstract
One of the main obstacles to perovskite solar cells (PSCs) entering the market is the doping-induced degradation of expensive hole transport materials (HTMs), which results in poor device stability. Although lithium bis(trifluoromethanesulfonyl)imide (Li-TFSI) and 4-tert-butylpyridine (4-tBp) as additives are commonly used in HTMs, they often lead to low device stability and reproducibility due to their hygroscopic and volatile nature. In this study, we incorporated the dilithium phthalocyanine (Li2Pc) molecule into the Spiro-OMeTAD precursor solution with Li-TFSI and 4-tBp to produce triple-cation PSCs with an n-i-p configuration operating with high efficiency and stability. The addition of the Li2Pc molecule not only improves the perovskite/Spiro-OMeTAD interface but also increases the 7C-7C stacking in the thin-film phase according to the absorption and Raman results. Based on space-charge-limited current, photoluminescence, time-resolved photoluminescence and lifetime analysis measurements, charge transfer is improved with the Li2Pc molecule and charge recombination losses are reduced. As a result, the control device showed a power conversion efficiency (PCE) of 20.0% with JSC = 24.6 mA/cm2 and fill factor (FF) = 72.7%, whereas the Li2Pc-doped device exhibited an improved PCE of 20.6% with JSC = 25.0 mA/cm2 and FF = 73.6%. The addition of Li2Pc resulted in more stable and high-efficiency solar cells that maintained approximately 90% of the initial efficiency after 40 days.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. best-research-cell-efficiencies-rev220126, (n.d.).
3. Origin of the thermal instability in CH3NH3PbI3 thin films deposited on ZnO10.1021/acs.chemmater.5b01598 ↗
4. Instability in CH3NH3PbI3 perovskite solar cells due to elemental migration and chemical composition changes10.1038/s41598-017-15841-4 ↗
5. Enhanced moisture stability of MAPbI3 perovskite solar cells through Barium doping10.1016/j.solener.2019.08.033 ↗
6. Hole-transport materials for perovskite solar cells10.1002/anie.201601757 ↗
7. The role of the interfaces in perovskite solar cells10.1002/admi.201901469 ↗
8. A brief review of hole transporting materials commonly used in perovskite solar cells10.1007/s12598-020-01691-z ↗
9. Imaging and quantifying non-radiative losses at 23% efficient inverted perovskite solar cells interfaces10.1038/s41467-022-30426-0 ↗
10. Lessons learned from Spiro-OMeTAD and PTAA in perovskite solar cells10.1039/D1EE02095A ↗
11. Strategies of modifying Spiro-OMeTAD materials for perovskite solar cells: a review10.1039/D0TA11564A ↗
12. Lithium salts as “redox active” p-type dopants for organic semiconductors and their impact in solid-state dye-sensitized solar cells10.1039/c2cp44397j ↗
13. Unveiling the critical role of oxidants and additives in doped Spiro-OMeTAD toward stable and efficient perovskite solar cells10.1021/acsaem.1c04097 ↗
14. Dopant engineering for Spiro-OMeTAD hole-transporting materials towards efficient perovskite solar cells10.1002/adfm.202102124 ↗
15. Role of 4-tert-Butylpyridine as a hole transport layer morphological controller in perovskite solar cells10.1021/acs.nanolett.6b02158 ↗
16. Improvement in solid-state dye sensitized solar cells by p-type doping with lewis acid sncl410.1021/jp406506d ↗
17. Inhibited aggregation of lithium salt in Spiro-OMeTAD for perovskite solar cells
18. Spiro-OMeTAD:Sb2S3 hole transport layer with triple functions of overcoming lithium salt aggregation, long-term high conductivity, and defect passivation for perovskite solar cells10.1002/solr.202100622 ↗
19. Copper salts doped Spiro-OMeTAD for high-performance perovskite solar cells10.1002/aenm.201601156 ↗
20. Spiro-OMeTAD doped with cumene hydroperoxide for perovskite solar cells10.1016/j.elecom.2021.107020 ↗
21. Acid additives enhancing the conductivity of Spiro-OMeTAD toward high-efficiency and hysteresis-less planar perovskite solar cells
22. Highly efficient and stable planar perovskite solar cells with K3[Fe(CN)6]-doped Spiro-OMeTAD10.1039/D1TC01284C ↗
23. Stability improvement of perovskite solar cells by the moisture-resistant PMMA:Spiro-OMeTAD hole transport layer
24. Solubility properties of unsubstituted metal phthalocyanines in different types of solvents10.1021/je2010215 ↗
25. The excited state behavior of Group IA alkaline-metal phthalocyanines revealed by photoluminescence and singlet oxygen formation10.1016/j.saa.2021.120297 ↗
26. Improvement of power conversion efficiency of phthalocyanine/C60 heterojunction solar cells by inserting a lithium phthalocyanine layer at the indium-tin oxide/phthalocyanine interface10.1063/1.3529452 ↗
27. The beneficial effects of mixing Spiro-OMeTAD with n-butyl-substituted copper phthalocyanine for perovskite solar cells10.1016/j.electacta.2016.11.119 ↗
28. Efficient planar heterojunction perovskite solar cells with Li-doped compact TiO2 layer10.1016/j.nanoen.2016.11.028 ↗
29. Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency10.1039/C5EE03874J ↗
30. Novel insight into the role of chlorobenzene antisolvent engineering for highly efficient perovskite solar cells: gradient diluted chlorine doping10.1021/acsami.8b17338 ↗
31. Double-halide composition engineered SnO 2 -triple cation perovskite solar cells demonstrating outstanding performance and stability10.1021/acsaem.0c01214 ↗
32. Electronic and optical properties of the spiro-MeOTAD hole conductor in its neutral and oxidized forms: a DFT/TDDFT investigation10.1021/jp207968b ↗
33. Spectrum-dependent Spiro-OMeTAD oxidization mechanism in perovskite solar cells10.1021/acsami.5b07703 ↗
34. Face-on stacking and enhanced out-of-plane hole mobility in graphene-templated copper phthalocyanine10.1039/C3CC47516F ↗
35. Spiro-OMeTAD:Sb2S3 hole transport layer with triple functions of overcoming lithium salt aggregation, long-term high conductivity, and defect passivation for perovskite solar cells10.1002/solr.202100622 ↗
36. Lewis-acid doping of triphenylamine-based hole transport materials improves the performance and stability of perovskite solar cells10.1021/acsami.0c03660 ↗
37. Performance enhancement of planar heterojunction perovskite solar cells through tuning the doping properties of hole-transporting materials10.1021/acsomega.6b00465 ↗
38. Molecular ferroelectric contributions to anomalous hysteresis in hybrid perovskite solar cells10.1063/1.4890246 ↗
39. Direct plasmonic solar cell efficiency dependence on Spiro-OMeTAD Li-TFSI content10.3390/nano11123329 ↗
40. Evidence of Spiro-OMeTAD de-doping by tert-butylpyridine additive in hole-transporting layers for perovskite solar cells10.1016/j.chempr.2019.04.003 ↗
41. Ghosh · 2019
42. Control over π-πstacking of heteroheptacene-based nonfullerene acceptors for 16% efficiency polymer solar cells10.1093/nsr/nwaa189 ↗
43. Efficiency: vs. stability: dopant-free hole transporting materials towards stabilized perovskite solar cells10.1039/C9SC01184F ↗
44. π-π stacking distance and phase separation controlled efficiency in stable all-polymer solar cells10.3390/polym11101665 ↗