journal article·2022-09

Enhancing performance of organic-inorganic perovskite solar cells using super halogen additive

Chenhui Zhang, Hongkang Gong, Qi Song, Chunjun Liang, Fangtian You, Zhiqun He, Dan Li

Organic Electronics· Volume 108
Publisher page

Abstract

Compositional engineering in perovskite solar cells usually uses mixed cations and halide anions to optimize the growth of perovskite films, reduce film defects and inhibit carrier recombination to achieve high-performance devices. The most commonly used anion component of perovskite is the iodine ion. However, the ionic behavior of iodine greatly affects the stability of perovskite solar cell devices. Here, NaBF 4 was first used to partially replace iodine in perovskite CS 0.05(FA 0.92MA 0.08) 0.95Pb(I 0.92Br 0.08) 3. After doping NaBF 4 , perovskite films show a longer PL lifetime and greater recombination resistance. It is found that the Stokes shift of the PL peak of the target film is reduced, indicating that doping NaBF 4 significantly inhibits the non-radiative recombination in the perovskite film. Doping NaBF 4 in perovskite passivates its defects, significantly improves the open-circuit voltage, filling factor and the power conversion efficiency of the device from 18.31% of the original device to 20.63%. After being stored in a nitrogen environment for 2400 hours, the device efficiency remains unchanged.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. Rational molecular passivation for high-performance perovskite light-emitting diodes10.1038/s41566-019-0390-x ↗
3. Perovskite solar cells: an emerging photovoltaic technology10.1016/j.mattod.2014.07.007 ↗
4. Electron-hole diffusion lengths > 175 mu m in solution-grown CH3NH3PbI3 single crystals10.1126/science.aaa5760 ↗
5. Perovskite solar cells: from the atomic level to film quality and device performance10.1002/anie.201703226 ↗
6. Improvement of Cs2AgBiBr6 double perovskite solar cell by rubidium doping10.1016/j.orgel.2019.06.037 ↗
7. Best research-cell efficiency chart
8. Silicon heterojunction solar cell with interdigitated back contacts for a photoconversion efficiency over 26%10.1038/nenergy.2017.32 ↗
9. High-performance photovoltaic perovskite layers fabricated through intramolecular exchange10.1126/science.aaa9272 ↗
10. The impact of energy alignment and interfacial recombination on the internal and external open-circuit voltage of perovskite solar cells10.1039/C9EE02020A ↗
11. Nonradiative recombination in perovskite solar cells: the role of interfaces10.1002/adma.201902762 ↗
12. Advancements in all-solid-state hybrid solar cells based on organometal halide perovskites10.1039/C4MH00236A ↗
13. Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes10.1038/s41586-021-03964-8 ↗
14. Efficient perovskite solar cells via improved carrier management10.1038/s41586-021-03285-w ↗
15. All-perovskite tandem solar cells with 24.2% certified efficiency and area over 1 cm(2)using surface-anchoring zwitterionic antioxidant10.1038/s41560-020-00705-5 ↗
16. CsPb0.9Sn0.1IBr2 based all-inorganic perovskite solar cells with exceptional efficiency and stability10.1021/jacs.7b07949 ↗
17. All-inorganic perovskite solar cells10.1021/jacs.6b10227 ↗
18. Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance10.1126/science.aah5557 ↗
19. Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency10.1039/C5EE03874J ↗
20. A novel quadruple-cation absorber for universal hysteresis elimination for high efficiency and stable perovskite solar cells10.1039/C7EE02634J ↗
21. Fabrication of efficient formamidinium tin iodide perovskite solar cells through SnF2-pyrazine complex10.1021/jacs.6b00142 ↗
22. Mixed-organic-cation perovskite photovoltaics for enhanced solar-light harvesting10.1002/anie.201309361 ↗
23. Chemical management for colorful, efficient, and stable inorganic-organic hybrid nanostructured solar cells10.1021/nl400349b ↗
24. Efficient and stable perovskite solar cells prepared in ambient air irrespective of the humidity10.1038/ncomms11105 ↗
25. Hole-Conductor-Free fully printable mesoscopic solar cell with mixed-anion perovskite CH3NH3PbI(3-x)(BF4)(x)10.1002/aenm.201502009 ↗
26. Direct observation of an inhomogeneous chlorine distribution in CH3NH3PbI3-xClx layers: surface depletion and interface enrichment10.1039/C5EE00403A ↗
27. FA(0.88)Cs(0.12)PbI(3-x)(PF6)(x) interlayer formed by ion exchange reaction between perovskite and hole transporting layer for improving photovoltaic performance and stability10.1002/adma.201801948 ↗
28. Origin of temperature-dependent performance of hole-transport-layer-free perovskite solar cells doped with CuSCN10.1016/j.orgel.2020.105958 ↗
29. Pseudohalide substitution and potassium doping in FA0.98K0.02Pb(SCN)2I for high-stability hole-conductor-free perovskite solar cells10.1016/j.jpowsour.2021.229781 ↗
30. Binding-energies in atomic negative-ions .210.1063/1.555735 ↗
31. Boosting photovoltaic performance for lead halide perovskites solar cells with BF4- anion substitutions
32. High-performance photovoltaic materials based on the superlattice structures of organic-inorganic halide perovskite and superhalogen hybrid perovskite10.1021/acs.jpclett.0c01161 ↗
33. Improved fill factor in inverted planar perovskite solar cells with zirconium acetate as the hole-and-ion-blocking layer10.1039/C8CP00563J ↗
34. Tailoring a dynamic crystalline process during the conversion of lead-halide perovskite layer to achieve high performance solar cells10.1039/C8TA07462C ↗
35. Synergistic effects of cation and anion in an ionic imidazolium tetrafluoroborate additive for improving the efficiency and stability of half-mixed Pb-Sn perovskite solar cells
36. CH3NH3PbI(3-x)(BF4)(x): molecular ion substituted hybrid perovskite10.1039/C4CC04537H ↗
37. Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%10.1038/nenergy.2016.142 ↗
38. Self-formed grain boundary healing layer for highly efficient CH3NH3PbI3 perovskite solar cells10.1038/nenergy.2016.81 ↗
39. Double-side-passivated perovskite solar cells with ultra-low potential loss10.1002/solr.201800296 ↗
40. Polymer-modified halide perovskite films for efficient and stable planar heterojunction solar cells10.1126/sciadv.1700106 ↗
41. Overcoming the photovoltage plateau in large bandgap perovskite photovoltaics10.1021/acs.nanolett.8b01480 ↗
42. New extraction technique of in-gap electronic-state spectrum based on time-resolved charge extraction10.1021/acsomega.0c02800 ↗
43. Understanding the correlation between temperature dependent performance and trap distribution for nickel oxide based inverted perovskite solar cells10.1109/TED.2021.3084906 ↗
44. The in-gap electronic state spectrum of methylammonium lead iodide single-crystal perovskites10.1002/adma.201505162 ↗
45. Determination of defect distributions from admittance measurements and application to Cu(In,Ga)Se-2 based heterojunctions10.1063/1.363401 ↗
46. Extraction technique of trap states based on transient photo-voltage measurement10.1038/s41598-020-69914-y ↗
47. Unraveling the structure-property relationship of molecular hole-transporting materials for perovskite solar cells10.1021/acsami.9b13189 ↗
48. Stable high-performance perovskite solar cells via grain boundary passivation10.1002/adma.201706576 ↗