journal article·2020-10

Optimization of gate-bias stability and gas-sensing properties of triethylsilylethynyl anthradithiophene micro-strip field-effect transistors by incorporating insulating polymer

Do Hun Kwak, Hyun Ho Choi, John E. Anthony, Seunghyun Kim, Huijeong Chae, Jinhyun Hwang, Shichoon Lee, Hui Joon Park, Bong-Gi Kim, Wi Hyoung Lee

Publisher page

Abstract

Abstract The control of the microstructure and patterning of 5,11-bis(triethylsilylethynyl)anthradithiophene (TES-ADT) film is essential for high-performance TES-ADT field-effect transistors (FETs) as a NO2 gas sensor. In this study, a binary blend film based on TES-ADT and insulating polymer was annealed by solvent vapor with patterned PDMS molds. The solvent-containing PDMS mold led to the TES-ADT crystallization under the phase-separation between TES-ADT and PMMA. This resulted in highly crystalline micro-strip films where TES-ADT and the insulating polymer were phase-separated on top and bottom, respectively. The micro-strip structures can have superior gas sensor performance because they have additional gas diffusion paths compared to non-patterned structures. Initial investigations to clarify morphology and microstructure of the films revealed that lateral phase separation got dominant with increasing the portion of the insulating polymer. The blended films were then used as the active layer in the FET-based gas sensors. The use of blended films instead of non-blended TES-ADT film in FETs is advantageous in reducing both the threshold voltage and subthreshold slope while compromising the field-effect mobility. The sensing response as the gas sensors is slightly lower in the blended TES-ADT FET than in the non-blended TES-ADT FET. However, the utilization of blended films significantly enhanced the bias-stress stability. Accordingly, a uniform baseline of the sensor performance was achieved in TES-ADT: insulating polymer blended FETs. This trend was in contrast to an abrupt decrease in the sensing signals of the non-blended TES-ADT FETs. The enhanced bias stability of the blended FETs was exhibited as a result of covering the silanol groups in SiO2 with a phase-separated insulating polymer. Our results provide a route for to the optimization of bias stability and response in TES-ADT micro-strip gas sensors through the application of a one-step blend technology.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Nanowire Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Organic field-effect transistor-based gas sensors10.1039/C4CS00326H ↗
2. Chemical and biological sensors based on organic thin-film transistors10.1007/s00216-005-3390-2 ↗
3. Multi-parameter gas sensors based on organic thin-film-transistors10.1016/S0925-4005(00)00541-4 ↗
4. Organic field-effect transistor gas sensor based on GO/PMMA hybrid dielectric for the enhancement of sensitivity and selectivity to ammonia10.1016/j.orgel.2019.01.038 ↗
5. Sensitive and selective pentacene-guanine field-effect transistor sensing of nitrogen dioxide and interferent vapor analytes10.1016/j.snb.2017.07.198 ↗
6. Effects of grain boundary density on the gas sensing properties of triethylsilylethynyl-anthradithiophene field-effect transistors10.1002/admi.201701399 ↗
7. Flexible field-effect transistor-type sensors based on conjugated molecules
8. Improving the selectivity to polar vapors of OFET-based sensors by using the transfer characteristics hysteresis response10.1016/j.snb.2015.11.012 ↗
9. Poly(3-hexylthiophene)/polystyrene (P3HT/PS) blends based organic field-effect transistor ammonia gas sensor10.1016/j.snb.2015.11.005 ↗
10. Response enhancement mechanism of NO2 gas sensing in ultrathin pentacene field-effect transistors10.1016/j.orgel.2015.05.022 ↗
11. Performance improvement of organic field-effect transistor ammonia gas sensor using ZnO/PMMA hybrid as dielectric layer10.1016/j.snb.2014.06.083 ↗
12. A gas sensor array for the simultaneous detection of multiple VOCs10.1038/s41598-017-02150-z ↗
13. Hierarchical nanostructured WO3–SnO2 for selective sensing of volatile organic compounds10.1039/C5NR02571K ↗
14. Enhanced sensitivity and selectivity of brush-like SnO2 nanowire/ZnO nanorod heterostructure based sensors for volatile organic compounds10.1039/C4RA05914J ↗
15. Gas-sensing properties of SnO2–TiO2-based sensor for volatile organic compound gas and its sensing mechanism10.1016/j.physb.2009.11.086 ↗
16. A magnonic gas sensor based on magnetic nanoparticles10.1039/C5NR01499A ↗
17. Chemical and biomolecule sensing with organic field-effect transistors10.1021/acs.chemrev.8b00016 ↗
18. Organic thin-film transistor (OTFT)-Based sensors10.3390/electronics3020234 ↗
19. Organic thin-film transistors: a review of recent advances10.1147/rd.451.0011 ↗
20. Charge carrier transport in organic semiconductors10.1016/S0379-6779(02)00398-3 ↗
21. Effects of field dependent mobility and contact barriers on liquid crystalline phthalocyanine organic transistors10.1063/1.1803945 ↗
22. Close look at charge carrier injection in polymer field-effect transistors10.1063/1.1613369 ↗
23. Gate bias stress in pentacene field-effect-transistors: charge trapping in the dielectric or semiconductor10.1063/1.3628297 ↗
24. 25th anniversary article: microstructure dependent bias stability of organic transistors10.1002/adma.201304665 ↗
25. Reliability of organic field-effect transistors10.1002/adma.200901136 ↗
26. Effect of crystallization modes in TIPS-pentacene/insulating polymer blends on the gas sensing properties of organic field-effect transistors10.1038/s41598-018-36652-1 ↗
27. Microstructural control of charge transport in organic blend thin-film transistors10.1002/adfm.201401087 ↗
28. Morphology control strategies for solution-processed organic semiconductor thin films10.1039/C4EE00688G ↗
29. 25th anniversary article: key points for high-mobility organic field-effect transistors10.1002/adma.201302514 ↗
30. Semiconducting π-conjugated systems in field-effect transistors: a material Odyssey of organic electronics10.1021/cr100380z ↗
31. Simultaneous control of molecular orientation and patterning of small-molecule organic semiconductors for organic transistors10.1016/j.orgel.2016.12.008 ↗
32. Enhanced gas sensing performance of organic field-effect transistors by modulating the dimensions of triethylsilylethynyl-anthradithiophene microcrystal arrays10.1002/admi.201901696 ↗
33. Unified film patterning and annealing of an organic semiconductor with micro-grooved wet stamps10.1039/C6TC01723A ↗
34. Organic field-effect transistors from solution-deposited functionalized acenes with mobilities as high as 1 cm2/V·s10.1021/ja042353u ↗
35. Semiconductor‐dielectric blends: a facile all solution route to flexible all‐organic transistors10.1002/adma.200900277 ↗
36. Centro-apical self-organization of organic semiconductors in a line-printed organic semiconductor: polymer blend for one-step printing fabrication of organic field-effect transistors10.1038/srep14010 ↗
37. The toxicology of inhaled nitric oxide10.1093/toxsci/59.1.5 ↗
38. Hopping transport in a molecularly doped organic polymer10.1103/PhysRevB.16.3676 ↗
39. Charge trapping in intergrain regions of pentacene thin film transistors10.1002/adfm.200800009 ↗
40. Scanning Kelvin probe microscopy on organic field-effect transistors during gate bias stress10.1063/1.2737419 ↗
41. Local charge accumulation and trapping in grain boundaries of pentacene thin film transistors10.1016/j.orgel.2010.07.021 ↗
42. Surface potential profiling and contact resistance measurements on operating pentacene thin-film transistors by Kelvin probe force microscopy10.1063/1.1637443 ↗
43. Bias-stress effects in diF-TES-ADT field-effect transistors10.1016/j.sse.2018.12.014 ↗
44. Grain boundary induced bias instability in soluble Acene-based thin-film transistors10.1038/srep33224 ↗